| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hwdep: Serialize DSP load requests
The check of the loaded DSP indices and the call of the driver's
dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep
file descriptor can be shared among threads, or inherited across fork,
so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both
observe the index as unloaded and enter the driver's callback
concurrently, even though the device itself is opened exclusively.
This breaks the assumption behind hw->dsp_loaded that a firmware index
is loaded only once. For example, snd-usb-usx2y hits
WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may
allocate the US-428 sequence URBs twice.
Serialize the check, the callback invocation and the bookkeeping with a
per-hwdep mutex, so that the second request returns -EBUSY. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Refuse a retried DSP load after a failure
snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and
the interrupt URB when the FPGA firmware image with index 1 is loaded,
and then creates the ALSA devices. If usx2y_in04_init() or
usx2y_create_alsa_devices() fails, the URBs that were already set up
are left in place.
The core keeps the index unloaded when the callback fails, so user
space may issue the same request again. The second attempt then enters
usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still
allocated and trips WARN_ON(usx2y->as04.buffer) or
WARN_ON(usx2y->in04_urb).
The URBs cannot be released at this point: the card may already have
registered PCM devices that user space can still open, and the
disconnect handler accesses the URBs without holding the DSP lock.
Mark the chip as hung instead, so that a retried request is refused
with -ENODEV and the assertions keep their meaning. The URBs are
released by snd_usx2y_card_private_free() when the card is freed.
A failing usx2y_async_seq04_init() still releases its own URBs, so that
path remains retryable. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally reset MMU context when emulating INIT
Force an MMU reset when emulating an INIT even if paging was already
disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while
L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU
context.
Alternatively, the reset could be scoped strictly to paging being enabled
or L2 being active, but SMM is also encoded in the page role. Even though
it _should_ be impossible for the vCPU to be INIT'd while SMM is active,
there's zero value in not handling SMM. At that point, the only scenario
where KVM _doesn't_ need to reset the MMU context is on an INIT with the
vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those
modes is somewhat common, it's far from a hot path and re-initializing the
MMU is not expensive, especially when the role isn't changing (KVM elides
most of the re-configuration in that case).
Note, like the Fixes commit, this bug only affects nested SVM as INIT is an
unconditional intercept on VMX, i.e. it's impossible to emulate INIT while
L2 is active.
Temporarily keep the guest TLB flush when CR0.PG is being cleared even
though it is fully redundant with the flush that is emitted on all INIT
events (KVM itself only does RESET when a vCPU is being created, i.e. when
CR0.PG must be '0'). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: fix race condition when accessing stale stack pointer
The driver uses hidpp->send_receive_buf to point to a stack-allocated
buffer in the synchronous command path (__do_hidpp_send_message_sync).
However, this pointer is not cleared when the function returns.
If an event is processed (e.g. by a different thread) while the
send_mutex is held by a new command, but before that command has
updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will
observe that the mutex is locked and dereference the stale pointer.
This results in an out-of-bounds access on a different thread's kernel
stack (or a NULL pointer dereference on the very first command).
Fix this by:
1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex
in the synchronous command path.
2. Moving the assignment of the local 'question' and 'answer' pointers
inside the mutex_is_locked() block in the handler, and adding
a NULL check before dereferencing. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close
bcd2000_disconnect() calls snd_card_disconnect(), which only prevents
new opens, and then frees the MIDI URBs. A rawmidi file that was
already open can still be closed afterwards, and its close callback,
bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb.
The URB pointers are cleared on disconnect and their accesses are
serialized with midi_lock, but bcd2000_midi_output_close() reads
midi_out_urb without that lock. The check can therefore pass just
before the pointer is cleared, and usb_kill_urb() then runs on the URB
that has already been freed:
BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80
Read of size 8 at addr ffff8880078e7d40
usb_kill_urb
bcd2000_midi_output_close
close_substream
rawmidi_release_priv
snd_rawmidi_release
Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe
Freed by: usb_free_urb <- bcd2000_midi_free
<- bcd2000_disconnect
Take the lock in bcd2000_midi_output_close() and reference the URB with
usb_get_urb() before releasing it. The URB then stays valid until
usb_put_urb() after usb_kill_urb() has returned, even if a disconnect
frees it in the meantime. usb_kill_urb() itself cannot run under
midi_lock, as the completion handler takes the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: raw: fix use-after-free in rawv6_send_hdrinc()
rawv6_send_hdrinc() caches the route before handing the skb to
l3mdev_ip6_out(). The VRF output path may replace skb->dst and release
the original route, leaving the cached pointer stale.
The function later dereferences that pointer for statistics accounting
and as the output device passed to NF_HOOK(). Its RCU read-side critical
section starts after l3mdev_ip6_out(), so it cannot prevent the old route
from being reclaimed in between.
Reload the route from the current skb destination after
l3mdev_ip6_out() returns.
KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route
allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and
the related RCU callback queued from vrf_l3_out(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap()
usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without
checking for NULL. The stream object is released by usb_stream_free(),
which is reached through us122l_stop() both when the device is
disconnected and when us122l_start() fails, and it leaves us122l->sk.s
set to NULL. The hwdep file stays usable after that, so a later mmap()
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182
crashes while reading s->read_size, which sits at offset 0x10.
That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(),
usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and
usb_stream_free() all test it before use. Only the mmap callback misses
the check, so let it return -ENODEV, matching what the other hwdep mapping
in usx2yhwdeppcm.c does when its shared buffer has not been allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Fix NULL dereference at hwdep open and release
usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of
usb_ifnum_to_if() straight to usb_autopm_get_interface() and
usb_autopm_put_interface(), without checking it for NULL.
usb_ifnum_to_if() returns NULL once the device is gone, since
usb_disable_device() clears udev->actconfig on disconnect. The hwdep file
can outlive the disconnect: the card is released with
snd_card_free_when_closed(), so a process that keeps the character device
open reaches the driver's release callback after the USB configuration has
been dropped, and interface_to_usbdev() then dereferences the NULL
interface at offsetof(struct device, parent). The open callback has the
same problem when it races with the disconnect.
Check both lookups and fail the open with -ENODEV; in release, skip the
runtime PM put when the interface is already gone and still run the rest
of the per-file cleanup. Move the us122l->first bookkeeping after the
checks so that a failed open no longer leaves a stale file pointer behind. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Initialize idle URBs before submitting streams
usb_stream_start() submits the first two capture and playback URBs and
only afterwards assigns sk->idle_inurb, sk->idle_outurb,
sk->completed_inurb and sk->completed_outurb to the remaining two URBs
of each direction.
A transfer can complete as soon as usb_submit_urb() has been called, so
the completion handler i_capture_start() or i_playback_start() may run
before those pointers are set. While the stream is still being
synchronized (state below usb_stream_sync1), stream_start() then calls
playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still
NULL, and the packet descriptors are written through that NULL pointer:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000018: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33
Call Trace:
<IRQ>
stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596
i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654
__usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657
usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691
tasklet_hi_action+0xa/0x20 kernel/softirq.c:994
handle_softirqs+0x16f/0x440 kernel/softirq.c:645
</IRQ>
The four URBs referenced by these pointers are allocated long before and
do not depend on any transfer state, so assign them before the submit
loop. Keeping the assignment inside the retry path also restores a
well-defined URB rotation when the start frame mismatch handling kills
and resubmits the streams. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on f2fs_get_node_folio_ra()
kernel BUG at fs/f2fs/file.c:845!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845
Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90
RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283
RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000
RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504
RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002
R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001
R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c
FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0
Call Trace:
<TASK>
f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882
f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940
f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907
evict+0x61e/0xb10 fs/inode.c:841
f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224
get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694
vfs_get_tree+0x92/0x2a0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3758 [inline]
do_new_mount+0x341/0xd30 fs/namespace.c:3834
do_mount fs/namespace.c:4167 [inline]
__do_sys_mount fs/namespace.c:4383 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4360
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
count = ADDRS_PER_PAGE(dn.node_folio, inode);
count -= dn.ofs_in_node;
f2fs_bug_on(sbi, count < 0);
The fuzz test will trigger above bug_on in f2fs.
The root cause should be: in the corrupted inode, there is a direct node
which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(),
after f2fs_get_dnode_of_data() finds such dnode:
1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923
2) once dn.ofs_in_node points to addr[923, 1017]
Then it will trigger the system panic.
Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should
not be an inode or xattr node, and then use it in below path to detect
inconsistent node chain in inode mapping table:
- f2fs_do_truncate_blocks
- f2fs_get_dnode_of_data
- f2fs_get_node_folio_ra
- __get_node_folio
- f2fs_sanity_check_node_footer
- case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restore RCU grace period in tcp_ao_destroy_sock
Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that
"the destruction of info/keys is delayed until the socket destructor"
and therefore "no one can discover it anymore".
That argument does not hold for the call site in tcp_connect()
(net/ipv4/tcp_output.c:4327-4332). At that point the socket is in
TCP_SYN_SENT, has already been inserted into the inet ehash by
inet_hash_connect() in tcp_v4_connect(), and is therefore very much
discoverable: any softirq running tcp_v4_rcv() on another CPU can take
the socket out of the ehash, walk into tcp_inbound_hash(), and load
tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on
the destroying CPU.
The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208)
which re-loads tp->ao_info via rcu_dereference_check(); the re-load can
still observe the (about-to-be-freed) pointer because there is no
synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and
tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is
then walked at line 223:
hlist_for_each_entry_rcu(key, &ao->head, node, ...)
The writer's synchronous kfree() is free to complete between the line
218 re-fetch and the line 223 hlist iteration. The slab is reused
(or simply LIST_POISON1-stamped if not yet reused) and the iteration
walks attacker-controlled or poison memory in softirq context.
Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM):
an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET
installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged
TCP-AO segments toward its eventual 4-tuple via raw sockets, then
calls connect(). The md5-wins reconciliation in tcp_connect() fires
tcp_ao_destroy_sock(); the softirq backlog reader on the loopback
NAPI path crashes on the freed ao->head.first walk:
Oops: general protection fault, probably for non-canonical
address 0xfbd59c000000002f
KASAN: maybe wild-memory-access in range
[0xdead000000000178-0xdead00000000017f]
CPU: 0 UID: 1000 PID: 100 Comm: repro_userns
RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0
Call Trace: <IRQ>
__tcp_ao_do_lookup+0x107/0x1c0
tcp_ao_inbound_lookup.constprop.0+0x12a/0x200
tcp_inbound_ao_hash+0x5ea/0x1520
tcp_inbound_hash+0x7ce/0x1240
tcp_v4_rcv+0x1e7a/0x3e10
...
Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info
and replace the synchronous tcp_ao_info_free() with a call_rcu()
callback. Readers that captured tp->ao_info before rcu_assign_pointer
NULLed it now see the object remain valid until rcu_read_unlock().
With the patch applied the reproducer runs cleanly for 2000 iterations
on the same kernel build. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: gus: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_gf1_pcm_volume_control() does not check the return value before
dereferencing kctl->id.index, which can lead to a NULL pointer
dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es1938: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_es1938_mixer() does not check the return value before dereferencing
the pointer, which can lead to a NULL pointer dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: cmipci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_cmipci_spdif_controls() does not check the return value before
dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ymfpci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_ymfpci_create_spdif_controls() does not check the return value
before dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: us144mkii: fix work UAF on disconnect
tascam_disconnect() cancels capture_work and midi_in_work before
usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs
self-resubmit, and their completion handlers reschedule the work.
A URB that completes in the small window between cancel_work_sync() and
usb_kill_anchored_urbs() therefore re-arms the work after its only
cancel. Nothing cancels it again before snd_card_free() frees the
card-private tascam structure, so the work handler then runs on freed
memory.
Kill the anchored URBs before cancelling the work; once the work is
cancelled no remaining URB can complete to re-arm it. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: temperature: tmp006: use devm_iio_trigger_register
tmp006_probe() allocates the DRDY trigger with devm_iio_trigger_alloc()
but registers it with plain iio_trigger_register(). The driver has no
.remove() callback, so on module unload the trigger stays in the global
trigger list while its memory is freed by devm, leaving a dangling
entry.
Switch to devm_iio_trigger_register() so the registration is undone in
the same devm scope as the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rolling window of temporary pages is needed when decompressing.
It can save a lot of temporary memory, e.g.
601,960-byte data can be compressed into a 256k LZ4 compressed extent,
which means it needs 146 extra pages per request in the worst case if
rolling decompression is disabled.
However, the upstream LZ4 implementation is not under EROFS' control:
For example, the literal copy memmove() may still **copy long literals
backward** on x86 based on the address comparison even when the source
and destination ranges do not overlap (IOWs, inline decompression
doesn't need to be considered here). That breaks the rolling assumption
and makes the optimization broken.
Disable it for now to make sure the data correctness first since EROFS
is used everywhere now: The rolling window approach can be revived once
we either ensure that the official LZ4 code always copies forward for
non-overlapping ranges or maintain our own LZ4 implementation in EROFS.
The main impact is a higher runtime memory footprint; However, recent
commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression") helps mitigate this when enabled but it's still not
perfect.
[1] https://www.usenix.org/conference/atc19/presentation/gao
ยง 3.3 Decompression |