| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IO::Socket::SSL::PublicSuffix versions through 2.099 for Perl let an on-path attacker choose the installed public suffix list because update_self_from_url fetches it over cleartext HTTP with no integrity check.
Called with no argument, as the module's documentation shows, the updater fetches the list from the `http://` address in the URL constant and checks only that the request succeeded, with no signature or digest over the response. The lines that come back are written into the module's own source file as the built-in list.
An attacker on the network path when the updater runs chooses the suffix boundary the module reports to every caller on the host, and that answer persists in the installed module until it is reinstalled. Dropping one rule makes the hostname check in IO::Socket::SSL accept a wildcard certificate that spans the whole public suffix that rule named. |
| IO::Socket::SSL::PublicSuffix versions through 2.099 for Perl allow code injection via a fetched list line that closes the built-in data heredoc when update_self_from_url rewrites the module's source.
The rewrite copies the module's source down to the built-in list's heredoc and appends each fetched line below it. Nothing checks that a line looks like a domain. A line that is not a comment loses only what follows a `//` and its trailing whitespace, so a line reading END_BUILTIN_DATA is appended as it stands and ends the data block in the rewritten file. Every fetched line after it is Perl.
Arbitrary Perl runs in every process that loads IO::Socket::SSL, which loads this module unconditionally, until the file is reinstalled. The attacker must control the fetched list, through the cleartext default URL or a caller-supplied one, and the updater must run with write access to the installed module. |
| JSON::XS versions before 4.05 for Perl allow memory exhaustion by buffering incremental input past max_size after a NUL byte in incr_parse.
The parser appends each chunk to its buffer and compares max_size with how far it has progressed, not with the buffer length. It treats a NUL byte as the end of the input, so a NUL within the first max_size bytes keeps it short of the limit. The buffer keeps growing, and incr_skip cannot remove the NUL.
A peer streaming data to an incr_parse consumer can exhaust process memory regardless of max_size. |
| JSON::XS versions before 4.05 for Perl leak the decoded key of an object rejected for a missing colon in decode_hv.
Unless it is short plain ASCII, a quoted key is decoded into a new scalar. Nothing frees that scalar when the object is rejected for a missing ':' after the key.
A process that keeps running after a failed decode retains one key per rejected document, with its size chosen by the sender. Repeated requests exhaust process memory. |
| JSON::XS versions before 4.05 for Perl allow stack exhaustion via nested tagged values under allow_tags in decode_tag.
With allow_tags, "(" starts a tagged value. Its tag and value are decoded recursively, and each can start another tagged value. Unlike arrays and objects, this nesting is not counted against max_depth.
A run of "(" bytes exhausts the C stack and triggers an uncatchable segmentation fault regardless of max_depth. |
| JSON::XS versions before 4.05 for Perl leak the decoded part of a rejected long string in decode_str.
A string is decoded through a fixed-size buffer (16 KiB in 4.04), and each time the buffer fills its contents move into a new scalar. Nothing frees that scalar when the string is then rejected for a control character, an invalid escape, malformed UTF-8 or the end of the input.
A process that keeps running after a failed decode retains the decoded part of each rejected string, with its size chosen by the sender. Repeated requests exhaust process memory. |
| JSON::XS versions from 4.0_00 before 4.05 for Perl corrupt the incremental buffer length by chopping past its end in incr_skip after a top-level number.
The incremental parser scans any run of digits, signs, dots and exponent markers as one number, but the decoder stops at the end of a valid number, so the parser keeps an offset into bytes it has not decoded. It then empties the buffer without clearing those bytes, and a later incr_parse call without new input reads them again and moves the offset past the end of the buffer. incr_skip, the documented recovery after an error, removes that many bytes and the buffer length wraps.
A peer sending input such as "1-2" to an incr_parse consumer can make the next read of incr_text exit the process through perl's uncatchable out-of-memory path. |
| JSON::XS versions from 3.04 before 4.05 for Perl write one byte past a heap buffer when appending a one-byte chunk in incr_parse.
The incremental buffer grows to one and a half times the length it must hold, with no room reserved for the terminating NUL. For an empty buffer and a one-byte chunk that request is one byte, which a buffer whose front was removed by earlier decodes can already have, so nothing is reallocated and the NUL lands one byte past the allocation.
A peer streaming data to an incr_parse consumer, choosing how the input is split into reads, can cause a one-byte heap out-of-bounds write. |
| JSON::XS versions from 3.0 before 4.05 for Perl read freed stack memory when a FREEZE result's serialisation grows the Perl stack under allow_tags in encode_rv.
With allow_tags, an object's FREEZE method is called in list context and each returned value is encoded through a saved Perl stack pointer. When encoding a returned value calls back into Perl, through TO_JSON under convert_blessed or another FREEZE, and that callback grows the stack, the stack is reallocated while the saved pointer still refers to the freed block.
Encoding such objects reads freed memory, and encode can return undef without an error. |
| SQL::Abstract versions before 2.000003 for Perl allow SQL injection via an arrayref column value in insert and update.
With the array_datatypes option off, which is the default, insert(), update() and values() treat an arrayref column value as literal SQL. Its first element goes into the SQL text unescaped and the rest become bind values. A JSON array, or a repeated form field decoded as an arrayref, is such a value.
An application that passes request data as column values to insert or update with the default options allows SQL injection.
Releases before 2.000003 also treat an arrayref in generate() as literal SQL, including through AUTOLOAD when allow_autoload is on, whatever array_datatypes is set to. |
| Perl versions before 5.40.5-RC1, from 5.41.0 before 5.42.3-RC1, from 5.43.0 before 5.43.11 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds.
Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer.
A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| Perl versions before 5.40.5-RC1, from 5.41.0 before 5.42.3-RC1, from 5.43.0 before 5.43.11 have an integer overflow in S_measure_struct leading to an out-of-bounds heap read in pack and unpack.
S_measure_struct adds each item's size times its repeat count to a running total with no overflow check, so a large repeat count in a pack or unpack template wraps the signed SSize_t total negative. The @, X, and x position codes then guard their moves with a signed length comparison that passes when the length is negative, advancing the buffer pointer out of bounds.
A template derived from untrusted input can read heap memory past the buffer and return it to the caller. |
| Perl versions from 5.9.4 before 5.41.9 produce incorrect regular expression match results when a stale failure flag ends the Aho-Corasick prescan early in S_find_byclass.
The prescan walks the subject for positions where the full pattern could match, and the engine tries it from the leftmost one recorded. A failing transition sets the failed flag, and a later successful transition does not clear it, so the prescan reads the stale flag as a failure and stops before it can record a candidate that starts earlier. It takes a subject where one candidate is recorded and a later character then forces a fallback through a fail link that succeeds.
Example:
"ABCDE" =~ m/ABCF|BCDE|C/; # matches C at offset 2, not BCDE
"ABCDE" =~ m/ABCF|BCDE|C(G)/; # no match, BCDE missed
An alternation like this can miss input it should match, or match it on the wrong branch, so an access or filtering decision made from the result can be wrong. |
| Perl versions before 5.40.5-RC1, from 5.41.0 before 5.42.3-RC1, from 5.43.0 before 5.43.10 produce silently incorrect regular expression matches when an alternation of more than 65535 fixed string branches is compiled into a trie in Perl_study_chunk.
When such branches are combined into a trie, the delta between the first branch and the shared tail is stored in a 16-bit field. A branch count above 65535 overflows the field, and the trie's match decision table is truncated with no warning or error.
A pattern of this shape produces false positive matches (matching strings it should not) and false negative matches (failing to match strings it should). When such a pattern gates an access or filtering decision, the result is wrong. |
| XS::libbrotli versions before 1.2.1.0 for Perl bundle a brotli library with an out-of-bounds write in the decoder.
Affected versions compile a bundled brotli into static archives that dependent XS modules link against at build time, rather than using the system library. The bundled copy, 1.0.7 or 1.1.0 across the range, carries the decoder out-of-bounds write described in CVE-2026-111497. Version 1.2.1.0 updates it to brotli 1.2.1.
XS::libbrotli has no Perl interface, so the decoder is reached through any dependent module that decompresses untrusted data with it. An attacker supplying a crafted brotli stream can corrupt decoder state, disclose memory, crash the process, or potentially execute arbitrary code. Upgrading the system brotli does not remediate this. |
| CallBackery versions before 0.62.0 for Perl allow log injection via newlines in the login name.
login() writes the login name to the application log without escaping control characters. The login RPC method needs no authentication, so a name containing a newline followed by text in the log record format adds a forged record.
An unauthenticated attacker can forge log records, such as a successful administrator login from an address of their choosing. |
| Catalyst::Plugin::Authentication versions before 0.10029 for Perl allow timing attacks on stored passwords via eq comparisons in the legacy password verifier.
CVE-2026-5091 was fixed in the realm-based verifier. The legacy verifier, used by the deprecated login method, compares clear-text passwords, crypt hashes and base64 digests with eq, so the comparison time depends on how many leading bytes match.
A remote attacker can use response-time differences to guess the stored password or hash. |
| CallBackery versions before 0.62.0 for Perl send users their own password hash and the admin-only user note via getUserConfig.
getUserConfig() returns the caller's whole cbuser row, including the stored password hash and the note field that the user interface shows only to administrators. getTableData() and getAllFieldValues() in the user management plugins also return the note to users without the admin right.
A non-administrator can read the notes administrators keep about them, and an attacker who obtains a session token can get that user's password hash and crack it offline. |
| DateTime::Lite versions before 0.8.1 for Perl allow CPU exhaustion via a per-day loop when adding seconds.
_normalize_leap_seconds crosses day boundaries one day at a time, so add(seconds => $n) on an object with a non-floating time zone takes about |$n|/86400 iterations, and nothing limits $n. The XS implementation and the pure-Perl fallback both have the loop.
An attacker who controls the number of seconds added can keep the process busy for as long as they choose. |
| CallBackery versions before 0.60.1 for Perl let unauthenticated clients read the POD of any file via path traversal in the /doc route.
Every CallBackery application mounts its documentation plugin at /doc, ahead of any session check. The route passes the requested name to Pod::Simple::Search->find without validation. find splits the name on "::" and joins the parts into a file path, so a name such as "..::..::..::etc::motd" escapes @INC.
Any file the server process can read is reachable. Only POD is rendered, but a file with a POD directive and no "=cut" is POD to the end of the file. |