| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM Guardium Data Protection 12.2 is vulnerable to a stack-based buffer overflow when processing a specially crafted PROXY protocol v1 header. A remote attacker can exploit this vulnerability to cause a denial of service or potentially execute arbitrary code. |
| A vulnerability was determined in smartalock wireguard-lwip up to cfba91666590e86bd67842c71cedf9a423be823a. Impacted is the function mul of the file src/crypto/refc/x25519.c of the component X25519 Ladder. Executing a manipulation can lead to out-of-bounds write. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| An unauthenticated buffer overflow vulnerability exists in the underlying operating system of AOS-10 or AOS-8 and could allow an unauthenticated adjacent attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to disrupt the availability of the affected system, with a limited impact to the integrity of the affected component. |
| Privilege escalation due to incorrect boundary conditions in the Graphics: CanvasWebGL component on Android. This vulnerability was fixed in Firefox 160.0.1. |
| A vulnerability has been found in GearUP Hyperev up to 20261020. This affects an unknown function. Such manipulation leads to on-chip debug and test interface with improper access control. The attack can be executed directly on the physical device. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in DrayTek Vigor2960 up to 1.5.1.6. This vulnerability affects the function doWebBackup of the file /cgi-bin/mainfunction.cgi of the component Backup Handler. Such manipulation of the argument path/value leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.1.7 is able to resolve this issue. The affected component should be upgraded. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A weakness has been identified in DrayTek Vigor2960 up to 1.5.1.6. Affected is the function setSWMProfile of the file /cgi-bin/mainfunction.cgi. Executing a manipulation of the argument filename can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. Upgrading to version 1.5.1.7 is able to address this issue. It is recommended to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A vulnerability was detected in DrayTek Vigor2960 up to 1.5.1.6. Affected by this issue is the function json_load_lock of the file /cgi-bin/mainfunction.cgi of the component Jsonstatus. The manipulation of the argument usefile results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. Upgrading to version 1.5.1.7 can resolve this issue. It is advisable to upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A flaw has been found in DrayTek Vigor2960 up to 1.5.1.6. This affects the function dataflowstatus of the file /cgi-bin/mainfunction.cgi of the component CGI Process. This manipulation of the argument option causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used. Upgrading to version 1.5.1.7 is able to mitigate this issue. You should upgrade the affected component. The vendor recommends: "1.5.1.6 isn't the latest version of 2960, the latest version fixes many security issues. And we have another one in our release plan which should solve the issues reported." |
| A kernel pool buffer overflow vulnerability in the
ct0531fl.sys file of the Creative WDM Audio Driver (64-bit), Sound Blaster Audigy 4
and Sound Blaster Audigy 5/Rx could allow a local
attacker with low privilege access to cause a denial of service. |
| The microcontroller lacks enabled debug lock bits, leaving the physical Single-Wire (SWS) debugging interface completely unrestricted. This allows an attacker with physical access to use a hardware programmer to dump the entire production firmware. |
| Memory overflow in NetScaler Push can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| A security vulnerability has been detected in TRENDnet TEW-657BRM 1.00.1. This vulnerability affects the function sprintf of the file /setup.cgi of the component mini_httpd. Such manipulation leads to out-of-bounds write. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor explains: ""I am not able to confirm if such vulnerability exists as the product has been EOL for more than 15 years. We will send out an announcement letting customers know." This vulnerability only affects products that are no longer supported by the maintainer. |
| A flaw has been found in D-Link DIR-600L 2.17b02. Affected by this issue is the function hnap_main of the file htdocs/cgibin of the component HNAP Handler. Executing a manipulation can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. |
| Memory overflow in Endpoint Analysis (EPA/EPAS) can lead to unpredictable or erroneous behavior or a Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning. |
| Memory overflow in ICA proxy can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Memory overflow in RTSP ALG can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler |
| Multiple Memory overflow vulnerabilities can lead to unpredictable or erroneous behavior and Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |