| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check fork type against dabtree block magic number
LOLLM complains that we fail to flag dabtree blocks that should never be
associated with the file fork -- data forks can't point to xattr leaves,
and attr forks can't point to dirent blocks. Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: mark overfull dabtree node blocks as corrupt
LOLLM observes that we need to range-check the dabtree node record count
before using it to index an array. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: restrict checksum offsets to known values
We need to prevent userspace from corrupting e.g. tcp->doff, because
many locations in conntrack and conntrack helpers rely on
nf_conntrack_in() having validated the packet headers.
nft_payload allows to alter headers later which invalidates this
assumption.
The 'Fixes' commit restricts writes to safe fields, but there is
another side channel: the checksum location.
Restrict this too. Reported via sashiko/gemini. |
| In the Linux kernel, the following vulnerability has been resolved:
rtnetlink: wait for RCU readers in rtnl_link_unregister()
rtnl_link_ops_get() finds ops on link_ops under rcu_read_lock() and only
then takes ops->srcu. rtnl_link_unregister() unlinks ops, then calls
synchronize_srcu() and cleanup_srcu_struct() without first waiting for
RCU readers. A reader that found ops before list_del_rcu() and has not yet
taken ops->srcu is not waited for.
Such a reader then locks a cleaned-up srcu_struct and keeps using ops
after the module that owns it is gone. rtnl_newlink() and
rtnl_dump_ifinfo() both look up ops without RTNL, the latter for any
user that dumps links filtered by kind.
With delays added between the lookup and srcu_read_lock() in
rtnl_link_ops_get(), and before rtnl_link_ops_put() in
rtnl_dump_ifinfo(), running "ip link show type dummy" alongside
"rmmod dummy" on a KASAN kernel gives:
BUG: KASAN: vmalloc-out-of-bounds in __srcu_read_unlock+0x57/0x70
Read of size 8 at addr ffffffffc02ff318 by task ip/147
Call Trace:
__srcu_read_unlock+0x57/0x70
rtnl_dump_ifinfo.cold+0x30/0x3b
rtnl_dumpit+0x7a/0x1b0
netlink_dump+0x486/0x11b0
__netlink_dump_start+0x661/0x910
rtnetlink_rcv_msg+0x611/0x9e0
netlink_rcv_skb+0x126/0x380
netlink_unicast+0x605/0x830
netlink_sendmsg+0x6d0/0xbb0
__sys_sendto+0x335/0x3a0
Call synchronize_rcu() before synchronize_srcu(), as
rtnl_af_unregister() already does. This should be enough because
rtnl_link_ops_get() is the only RCU walker of link_ops, and it takes
ops->srcu before rcu_read_unlock(), so every reader that found ops is
covered by synchronize_srcu() once the RCU grace period ends. The extra
grace period only costs time at module unload.
Readers and the writer were serialized by RTNL until link_ops got its
own mutex, which is why the missing RCU wait did not matter before. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value
xfs_attr_copy_value() takes the value length as a signed int and, for a
remote xattr, is handed args->rmtvaluelen. That field is filled from the
on-disk __be32 xfs_attr_leaf_name_remote.valuelen in
xfs_attr3_leaf_getvalue(), so a crafted length such as 0x80000000 is
stored into the signed rmtvaluelen as a negative number.
The "buffer too small" guard in xfs_attr_copy_value() is a signed
comparison:
if (args->valuelen < valuelen)
return -ERANGE;
A negative valuelen therefore compares as smaller than the caller's
buffer size, skips the -ERANGE path, and is then used as a copy length,
leading to an out-of-bounds copy of a full remote block into a small
getxattr(2) buffer on a mounted crafted image.
Reject a value length that is negative or larger than the maximum xattr
size before it is used, so a bogus on-disk length can no longer slip
through the value copier. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: reject remote xattr entries with an out-of-range value length
xfs_attr3_leaf_verify_entry() validates a remote attribute entry's name
but never bounds its on-disk value length (xfs_attr_leaf_name_remote.
valuelen, a __be32). A crafted leaf with valuelen = 0x80000000 passes
the verifier and the CRC.
That length is later assigned into the signed int args->rmtvaluelen
(xfs_attr3_leaf_getvalue), becoming negative, which slips past the signed
-ERANGE check in xfs_attr_copy_value(); a getxattr() with a small buffer
then memcpy()s a full remote block into the small kvalue buffer
(xfs_attr_rmtval_copyout) -- a heap out-of-bounds write with
attacker-controlled content, from an unprivileged getxattr(2) on a
mounted crafted image.
Reject remote entries whose value length exceeds XFS_XATTR_SIZE_MAX in
the leaf verifier, so the malicious block is rejected at read time. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: always forget cached ACLs if the attr fork swap succeeds
LOLLM complains that xrep_xattr_rebuild_tree omits the xfs_forget_acl
call if the attr fork swap succeeds (and hence the acls might have
changed) but reaping the old attr fork fails. Fix it so that we always
purge the cached acls if the swap succeeds, even if subsequent steps do
not. This avoids some cache coherency problems with access controls. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: always report inode repair setup failures
LOLLM noticed that xchk_setup_inode silently discards errors being
returned by xrep_setup_inode. Fix that, and fix the stub macro so that
it actually "returns" a value. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bound da-node entry count against the correct geometry
xfs_da3_node_verify() bounds the node entry count against the larger of
the directory and attribute geometries because, as a buffer verifier, it
cannot tell whether the block belongs to the directory or the attribute
tree. When the directory block size exceeds the fs block size (e.g.
mkfs.xfs -n size=64k -b size=4k), an attribute node buffer is a single fs
block that holds only m_attr_geo->node_ents entries, yet a crafted attr
node may claim a count up to m_dir_geo->node_ents and still pass the
verifier.
xfs_da3_node_lookup_int() then indexes btree[] up to that count during
its binary search -- an out-of-bounds read via getxattr/listxattr on a
mounted crafted image.
The buffer verifier is the wrong place to tighten this: it has no fork
context, and the transaction-less read path used by getxattr does not run
xfs_da3_node_set_type() either. xfs_da3_node_lookup_int(), on the other
hand, always runs on that path and holds args->geo, the geometry of the
fork actually being searched. Bound the entry count against
args->geo->node_ents there, before walking the entries. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: bound inode fork length against the fork size during log recovery
xlog_recover_inode_commit_pass2() copies an inode log item's data/attr
fork region into the inode buffer using the on-log region length without
bounding it against the fork capacity, e.g.:
len = item->ri_buf[2].iov_len;
memcpy(XFS_DFORK_DPTR(dip), src, len);
The only guard is an ASSERT, which is a no-op on production kernels
(CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy.
A crafted image with a dirty log can therefore drive a heap out-of-bounds
write at mount time. The XFS_ILOG_DBROOT sibling already passes
XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths
did not.
Bound each logged fork region against the destination fork size before
copying it, and reject the log item with -EFSCORRUPTED when it does not
fit. Because the recovered inode is only verified after the fork data has
been copied in, the checks are done up front, before any memcpy into the
on-disk inode. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: complain loudly when dirtree checker finds broken links
LOLLM observed that the directory tree walk code bails out if it finds
broken parent pointers along the way. However, it flattens the return
code to zero, which means that we can end up in the repair code having
not completed the scan. We should never proceed with a repair in this
state, so let's mark the scrub incomplete and exit. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't overrun incore inode when cleaning attr forks
LOLLM noticed that xrep_dinode_check_afork doesn't check for a
di_forkoff value that is so large that the attr fork would begin after
the end of the inode space. This causes afork_{ptr,size} to be
nonsense. What we really ought to do here is zap the attr fork. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't subtract excess usage twice when computing agf_btreeblks
LOLLM noticed that the free space btree repair code calculates
agf_btreeblks from the number of blocks we wrote to rebuild the free
space btrees (minus the roots). That's correct. However, it observes
that we subtract the "excess" reservation, which is not correct. Fix
this accounting problem. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: don't try to scrub self-referential dirent in metapath checker
LOLLM observes that the _ilock_both helper will loop forever trying to
double-lock the same inode if mpath->dp == sc->ip. Callers are not
supposed to call us with parent == child because that makes no sense.
Trigger an assertion, mark the scan incomplete, and return IO error
so that this fails noisily. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix correction of unwritten extents in quota file data fork
LOLLM noticed a couple of problems with the code that fixes unwritten
mappings in the quota file's data fork: first, we should zero the ondisk
contents as part of converting them to "unwritten" just in case we crash
shortly after the conversion. Second, and more importantly, it noticed
that we fail to resynchronize the iext tree cursor after modifying the
iext tree. If the tree shape changes, we could be in a world of hurt.
Third, we should force a quotacheck if we reset an ondisk dquot. Fix
all issues. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: size directory name conversion buffer correctly
A 2048-byte ASCII directory name needs 4098 bytes when converted to
UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps
its allocation at PATH_MAX and writes past the end of that buffer.
Allocate space for one UTF-16 code unit per input byte plus the
terminator. Use kmalloc_array() to check the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: fix buffer length underflow in RDMA transfers
When a remote buffer descriptor is larger than the remaining local
buffer, smbdirect_connection_rdma_xmit() clamps its length and sets
buf_len to zero. The common accounting code then subtracts the clamped
length from buf_len, causing it to underflow. If another descriptor
follows, the loop processes it with a wrapped remaining length and
includes memory beyond the local buffer in the RDMA transfer.
A client can trigger an out-of-bounds kernel write with an SMB WRITE
request, or an out-of-bounds kernel read with an SMB READ request, by
supplying multiple RDMA buffer descriptors with an oversized descriptor
before the last one.
Remove the premature assignment to buf_len. Subtracting the clamped length
already consumes the remaining buffer, so the next iteration stops and
only descriptors within the local buffer are used to build work requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound POSIX lock data area by response length
CIFSSMBPosixLock() receives a TRANS2 response whose server-provided
DataOffset and DataCount are not required by validate_t2() to describe an
interval inside the response. A server can therefore make the client read a
cifs_posix_lock beyond the response buffer and return those kernel bytes
through F_GETLK.
Use smbCalcSize() to obtain the full response length after any multipart
TRANS2 reassembly, then reject data areas that extend past it before
dereferencing them. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: don't resurrect an exiting tcon from cached dir workers
cfids_laundromat_worker() bumps tcon->tc_count for every expired open
cfid and queues cached_dir_offload_close() without checking whether the
tcon is already being torn down. Racing with the final cifs_put_tcon(),
the tcon comes back from zero and gets torn down twice:
T1 T2
cifs_put_tcon()
--tc_count == 0, TID_EXITING
tconInfoFree()
free_cached_dirs()
cancel_delayed_work_sync() cfids_laundromat_worker()
++tc_count == 1
queue_work(serverclose_wq)
kfree(tcon->origin_fullpath)
kfree(tcon)
cached_dir_offload_close()
close_cached_dir() [UAF]
cifs_put_tcon()
tconInfoFree() [double free]
cached_dir_lease_break() also bumps tc_count without tc_lock, racing with
the laundromat's locked update.
Take the tcon reference through a helper that refuses once the tcon is
TID_EXITING or its refcount has dropped to zero. Queued put_work and
close_work then always hold a tcon reference, so tconInfoFree() can't
run before they finish and free_cached_dirs() doesn't need to flush any
workqueue. If the laundromat can't get a reference, put the cfid back on
the dying list for free_cached_dirs() to free; its handle goes away with
the tree connection.
The lease break path finds the tcon on ses->tcon_list under
cifs_tcp_ses_lock, so it can't see TID_EXITING, but it now takes tc_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix buffer overflow in SMB2_tcon()
In SMB2_tcon(), unc_path is allocated with a fixed buffer size of
MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled
UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the
destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code
units.
Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the
length check on UNC mount options, allowing mount paths to exceed
MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in
SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16()
to write past the end of the heap object, resulting in a slab-out-of-bounds
write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy()
truncates it in cifs_tcon::tree_name, causing subsequent reconnects or
failovers to fail.
Fix this by first verifying that the length of tree does not exceed
MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate
unc_path based on the length of tree so that it safely accommodates all
UTF-16 code units for paths within MAX_TREE_SIZE.
[pc: remove unused MAX_SHARENAME_LENGTH] |