| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ufs: use u64 for directory size in ufs_last_byte
ufs1_read_inode() and ufs2_read_inode() copy the untrusted 64-bit
on-disk size into inode->i_size. ufs_last_byte() then truncates that
value to an unsigned int before calculating the valid extent of a
directory folio.
A directory size of exactly 4 GiB is truncated to zero. In
ufs_find_entry(), subtracting the requested record length from that zero
forms an endpoint almost 4 GiB beyond the mapped folio. A crafted UFS2
image produces:
BUG: KASAN: use-after-free in ufs_find_entry+0x583/0x6e0 [ufs]
Read of size 1
...
ufs_find_entry
ufs_inode_by_name
ufs_lookup
__lookup_slow
path_lookupat
The KASAN classification reflects that the adjacent physical page was
free; the source-level operation is an out-of-folio read. A controlled
UFS1 test with CONFIG_UFS_FS_WRITE enabled also made ufs_find_entry()
return a directory entry from an adjacent anonymous page. unlink() then
passed that pointer to ufs_delete_entry(), which cleared the adjacent
page's 3
2-bit d_ino. This write result reproduced three out of three
times.
UFS normally requires a privileged mount path. A relevant boundary is
a privileged automounter or image-processing service handling an
attacker-supplied filesystem. The write primitive additionally requires
UFS1 to be mounted read-write with CONFIG_UFS_FS_WRITE enabled; the read
is reachable with read-only UFS2.
Keep the intermediate size arithmetic at 64 bits so non-final pages are
bounded at PAGE_SIZE. With this change, the same controlled tests reach
the real on-disk directory entry and produce no adjacent-page write or
KASAN report. A reproducer and full validation logs are available on
request.
The vulnerable helper is present in v7.2-rc3, v7.1, v6.18.38, v6.12.95,
v6.6.111, and upstream master at 1229e2e57a5c. Runtime reproduction and
fix validation were performed in an x86-64 QEMU guest running v7.2-rc3
with generic KASAN. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix address wraparound when scanning large folio PTEs
numa_rebuild_large_mapping() and do_swap_page() can be tricked into
generating an address wraparound, crashing the kernel. All that's required
is to map a tail page of a large folio close enough to the start/end of
the address space to e.g., make
unsigned long addr_start = addr - (nr << PAGE_SHIFT);
to wrap around.
Let's fix it by providing a better helper, folio_scan_range(), that
takes care of staying within VMA and page table boundaries while
handling possible wraparounds.
There are some nasty details, like not being able to use pmd_addr_end()
in this context. Add some helpful comments for these cases. |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 remote code execution was possible via best-fit character mapping in Perforce settings |
| PHP-CGI out-of-bounds read and write during PATH_INFO correction.
The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: configfs: fix data offset calculation for subsystem callbacks
`get_group_data()` chooses between `Group::<Parent>::container_of()` and
`Subsystem::<Parent>::container_of()` based on whether `this` represents
the root group of a configfs subsystem. It detects this by checking
`(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c`
unconditionally sets `cg_subsys` for every `config_group` attached anywhere
in a registered subsystem, including the subsystem's own `su_group`. The
only `config_group` with a NULL `cg_subsys` is the configfs root, on which
userspace cannot trigger callbacks. The check is therefore always false at
runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks
reach the `Group` branch and may read `data` at the wrong offset.
Thus change the `is_root` check to correctly identify whether a group is a
root group by comparing `this` to `subsys.su_group`.
[ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Guard domain index uses against speculative bypass
The previous array_index_nospec() placement only covered the admin
permission check, leaving ap_test_config_usage_domain() and
ap_test_config_ctrl_domain() in the CCA path exposed to speculative
execution.
Move the sanitization to before all permission and config checks in
both the CCA and EP11 paths. Hold the sanitized domain value in
another variable so that the later use can choose to use either the
original value (subject to speculative execution) or the sanitized
value (which may in case of AUTOSEL_DOM reflect the wrong
value). Before that, check the domain value to be either AUTOSEL_DOM
or in range 0...AP_DOMAINS-1 and return with -EINVAL in case this check
does not pass. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix out-of-bounds ptr advance in cca_query_crypto_facility()
The FQ reply parser code blindly advanced the walk pointer by a length
value read directly from the hardware reply payload without checking
that the advance stayed within the allocated reply buffer. A corrupt
or malicious device response could push ptr beyond the cprbmem region,
causing an out-of-bounds dereference or kernel memory exposure via the
subsequent memcpy().
Fix this by tracking the remaining reply buffer space in a variable
and validating each device-supplied length field against it before
advancing or dereferencing the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Fix and improve zcrypt reply message verification checks
Add or improve checks related to buffer sizes and reply sizes to the
handling of replies from the crypto cards for CCA, EP11 (AP message
type 6) and ICA (AP type 50) messages. The verification code related
to reply field length was not designed well and thus firmware
deficiencies could lead to unexpected behavior in the zcrypt device
driver. Thus improve the code to more closely inspect especially
length fields at message replies.
Add length validation before accessing reply message structures in
zcrypt_msgtype6_receive(), zcrypt_msgtype6_receive_ep11(), and
zcrypt_msgtype50_receive() to prevent out-of-bounds reads and
potential kernel memory disclosure.
Also rework these three functions to validate reply lengths more
carefully before copying data back into the request buffer. Use size_t
for length calculations, reject inconsistent reply sizes, and add
defensive handling for short invalid replies. For XCRB replies,
validate both reply segments and derive the effective message length
from the covered range instead of trusting only the second segment.
Additionally improve some of the later invoked evaluation functions
which further check the payload. Add comments about length assumptions
and for the type50 processing rework the payload processing completely
with removing a misplaced BUG_ON(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/kprobes: Prevent kprobes on instructions with exception table entry
The mvcos exception handler ex_handler_ua_mvcos() decodes the faulting
instruction, assuming it is an mvcos instruction. In case the instruction
is kprobed the decoded instruction is a breakpoint instruction instead,
which leads to incorrect instruction decoding and potential register
corruption.
Fix this by simply preventing to set a kprobe on such instructions,
similar like arm64 is doing it. |
| In the Linux kernel, the following vulnerability has been resolved:
media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path
hackrf_alloc_urbs() frees the URBs it allocated so far when one
allocation fails, but leaves the entries in dev->urb_list[] and
dev->urbs_initialized untouched. The caller, hackrf_start_streaming(),
then calls hackrf_free_urbs() on the error path, which walks
dev->urbs_initialized entries and calls usb_free_urb() a second time on
the already-freed URBs, causing a use-after-free (slab-use-after-free
Write in usb_free_urb()).
Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let
hackrf_free_urbs(), which the caller already invokes on error, own the
cleanup of the successfully allocated URBs. |
| Incorrect RFC 3986 URI serialization for oversized input.
The Uri\Rfc3986\Uri class does not correctly handle the output-size limit and errors of the uriparser library when converting a URI back to a string. For a URI whose string representation reaches approximately 2 GiB, toString(), toRawString() and other serializing operations can return a truncated or invalid string instead of an error. An application that accepts attacker-controlled URI data of that size, has enough memory to process it and trusts the result may make incorrect validation or routing decisions, and the large allocations can exhaust memory. parse_url() and Uri\WhatWg\Url are not affected.
This issue affects PHP versions 8.5.* before 8.5.13. |
| SOAP information disclosure through malformed array dimensions.
The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| Double free during DOM XML serialization.
The XML serializer of Dom\XMLDocument and Dom\HTMLDocument can share ownership of a generated namespace prefix between the namespace-prefix maps of an element and a descendant, so the prefix is used after being freed and then freed a second time. The document does not need to be malformed. An application that parses attacker-controlled XML or HTML with these classes and serializes it with saveXml() can be crashed, and repeated requests can cause denial of service. Code execution has not been demonstrated.
This issue affects PHP versions 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent stale data from being written by SMB2 WRITE requests
Initialize the compatibility byte in request buffers without zeroing
the entire allocation. Keep the one-byte compatibility exception for
SMB2 messages so valid zero-length WRITE requests remain compatible,
and validate the data range in the WRITE handlers against the current
compound request before accessing it.
This prevents stale request-buffer data from being written to files or
sent to IPC pipes. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB read and cross-share confusion in ksmbd_validate_name_reconnect()
ksmbd_validate_name_reconnect() indexes
ab_pathname[share->path_sz + 1] without checking that the path is
longer than share->path_sz + 1 (d_path() fills the buffer from the
end). A durable fp is not bound to its original share, so a client
can preserve a file from a short-path share and reconnect it on a
long-path share, making strcmp() read past the PATH_MAX buffer -
with a long enough share path this oopses the kernel, and on a
mapped page it also gives a byte-equality oracle on adjacent heap
(the reconnect succeeds exactly when the out-of-bounds string
equals the requested name). A same-share variant with the durable
fp at the share root reads 1 byte past the buffer
(strlen(ab_pathname) == share->path_sz).
Check before comparing: the path must be longer than share->path_sz,
it must start with share->path, and the next character must be '/'.
The share root itself is accepted only for an empty name. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: wait for negotiation before receiving another PDU
The receive thread queues a request and can read the next PDU before
the negotiation worker finishes. While need_neg is set, the next PDU
can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined
SMB2 request can therefore make the worker handle an earlier, shorter
SMB1 request with SMB2 operations and read beyond its buffer.
An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE
that changes conn->ops again. Wait for work queued while the connection
is new or needs negotiation to complete before reading another PDU.
This keeps the operations stable for both stages of negotiation without
changing when need_neg is cleared. |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.105.0, contain an Improper Restriction of Rendered UI Layers or Frames vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Denial of Service and Launch of Phishing Attacks. |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the BCF reader can experience an integer overflow in a record-length check that verifies whether a record contains enough bytes for the expected number and size of stored items. A crafted BCF record can bypass this check, causing reads beyond the stored data and, in some cases, writes beyond the heap buffer when the reader sets the least significant bit of accessed bytes. Opening such a file can crash the process, corrupt data or heap structures, and may permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 XPACK and XRLE decoders cache expanded block pointers at indexes beyond the 512-element slice->block_by_id array. An array index partially controlled by data in the input file first causes an out-of-bounds read to determine whether a block is cached; a null value then causes allocation of a block and an out-of-bounds pointer write to the same element. The invalid read may crash the process, while the write may corrupt heap state and could permit arbitrary code execution. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |
| HTSlib is a library for reading and writing bioinformatics file formats. Prior to 1.21.2, 1.22.3, 1.23.2, and 1.24, the experimental CRAM v4 functions cram_xpack_decode_char and cram_xrle_decode_char do not validate that attacker-controlled decode sizes remain within their expanded input arrays. Crafted CRAM data can therefore make either decoder read beyond the supplied input buffer, potentially disclosing process-state information or crashing the process through invalid memory access. This issue is fixed in versions 1.21.2, 1.22.3, 1.23.2, and 1.24. |