| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Guard the playback copy
usx2y_urb_play_prepare() sums the packet lengths of a whole URB, copies
that many frames with a single wrap, and sizes each playback packet from
the capture packet's actual_length. Three things are unchecked: that the
URB fits in the ring buffer, that a packet fits in the playback
endpoint's maxpacksize, from which tmpbuf is allocated, and that
actual_length is a whole number of frames. The ISO descriptors take the
raw actual_length while transfer_buffer_length and the copies take
count * stride, so a packet that is not a multiple of the stride makes
the descriptors add up to more than the buffer, by up to stride - 1
bytes per packet.
Return -EPIPE, as the existing packet-size check does, when the URB is
larger than the buffer or a packet is larger than maxpacksize, and size
each descriptor from whole frames, so the descriptors add up to
transfer_buffer_length and each stays within maxpacksize. The buffer
case is prevented by the previous patch and this is the guard for it;
the other two depend only on the device.
The first case is reachable on the unpatched driver with ordinary
packets: on 7.3-rc7, a USB/IP device presenting the US-122 interface
layout and sending 48-frame packets, with a 100-frame playback buffer
(two 50-frame periods, inside the stock constraints), KASAN reports:
BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x79b/0x1ac0
Read of size 18446744073709551280 at addr ffff88800e6b02e0 by task vhci_rx/80
With both patches, the same device and a 200-frame playback buffer is
refused at hw_params with EINVAL, and a 400-frame buffer plays for 30 s
with the position advancing inside the buffer, no KASAN report and
neither guard message. The maxpacksize check is not exercised: the
emulated device reports the same wMaxPacketSize on both endpoints.
The descriptor case is visible with capture packets of 195 bytes at
stride 4 (48 frames and 3 bytes): without this change the four
descriptors add up to 780 bytes for 768 bytes of data, and USB/IP's
completion check refuses the URB ("total length of iso packets 780 not
equal to actual length of buffer 768", -EPROTO), after which the driver
stops the streams. With this patch every descriptor is 192 bytes, the
descriptors add up to the data in every URB for 30 s, the position
advances inside the buffer and KASAN reports nothing. The 48-frame
playback run above is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: bound the SIT/NAT bitmaps by the checkpoint pack
sit_ver_bitmap_bytesize and nat_ver_bitmap_bytesize are used as memcpy
lengths into and out of sbi->ckpt, which is sized from cp_payload alone,
and nothing compares either length against that allocation.
sanity_check_ckpt() has checked these two fields since c77ec61ca0a4, which
added them after a crafted image overran build_sit_info(). That check ties
each length to a segment count; it never compares either against the
allocation, which is the half this adds.
Mounting over-reads in build_sit_info() and build_node_manager(), and the
first checkpoint writes the same lengths back through the same pointers,
so the over-read's contents reach the on-disk checkpoint. An unmount is
enough; the filesystem does not have to be used.
Bound both ends the way __bitmap_ptr() lays them out. The three branches
differ, so a single sum of the two lengths would still admit a small
overflow when cp_payload is non-zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: look up the index by the decoded origin
A file opened by file handle on an overlay with nfs_export=on can show
the stale lower data of a file that was copied up to the upper layer.
While the file opened this way stays in the inode cache, a lookup of the
copied up file by path fails with ESTALE for all users. The open can
also succeed for a file that was removed, where it has to fail with
ESTALE. This happens with a handle that has one byte changed. The handle
comes from an NFS client, or from a process that calls
open_by_handle_at() with CAP_DAC_READ_SEARCH in the initial user
namespace.
When a file in a lower layer is about to be modified, overlayfs first
copies it to the upper layer (copy up). With nfs_export=on, each copy up
also creates an entry in the index directory, a directory that overlayfs
keeps for itself on the upper filesystem.
The handle of an overlay file that comes from a lower layer wraps the
handle of its lower inode. Overlayfs calls this lower inode the origin.
The overlay handle stays valid after a copy up.
To decode such a handle, ovl_lower_fh_to_d() first decodes the wrapped
handle to the origin. If no overlay inode is cached for the origin, it
looks in the index directory:
- An index entry there leads to the upper file.
- A whiteout, the marker that overlayfs uses for a removed file, means
that the overlay file was removed.
The name of an index entry is the handle that copy up encoded for the
origin, as a hex string.
ovl_lower_fh_to_d() builds the name for this lookup from the bytes that
the caller passed in. But handles with different bytes can decode to the
same inode:
- Overlayfs ignores some flag bits of the handle.
- A lower filesystem can accept a different fid type, extra bytes, or
generation 0 for any generation.
Such a handle decodes to the origin but misses the index entry or the
whiteout. So the decode returns an overlay inode that has only the lower
file.
While that inode is cached, a path lookup of a copied up file fails with
ESTALE, since the upper file that the lookup finds does not match the
cached inode, which has none.
Reproduced on tmpfs and on ext4 with open_by_handle_at(), after a copy
up and a mount cycle. A handle in which one flag bit, the fid type, the
length or the generation was changed read the old lower data, and path
lookups returned ESTALE.
Fix this by re-encoding the decoded origin and building the index name
from that handle. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: reject data-in commands with a data-out buffer
SG_IO can submit a data-in SCSI command with DMA_TO_DEVICE. The
scatterlist can then contain pages pinned without write access.
ata_scsi_rbuf_fill() writes simulated replies to that scatterlist;
in the reported case, the copy tried to write the shared zero page
and faulted in the kernel.
The same mismatch can affect SG_IO commands translated by libata.
ZBC IN and GET PHYSICAL ELEMENT STATUS completion handlers can modify
the receive buffer even if the drive aborts the command. For ATAPI,
the successful INQUIRY completion also rewrites the buffer in
atapi_fixup_inquiry().
Reject these mismatched commands before the buffer is written or the
command is issued. Report ABORTED COMMAND / DATA IN BUFFER ERROR because
the CDB itself can be valid; the supplied transfer direction is wrong. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Force device table to maximum size
IOMMU can perform out-of-bounds read of the device table entry (DTE)
that is adjacent to the last DTE and falls outside the device table.
For example, if the device table can hold 0 to N-1 entries, then the
IOMMU can be made to fetch the Nth entry, which falls outside the
device table.
The device table is owned by the hypervisor (HV) and is assigned in 4KB
pages that are contiguous in system physical address (SPA). If the
out-of-bound DTE falls on a guest-owned page, then the guest can exploit
this bug to setup malicious table walks to corrupt HV pages and/or bring
down the system. Note that this bug does not manifest when the device
table size is set to its maximum size of 2MB.
Therefore, force the device table size to the maximum 2MB on affected
processors. These are CPU family 0x17 (Zen1/Zen2) through family 0x1a
(Zen5/BRH).
This is a mitigation for CVE-2024-21963.
kdump reuses the previous kernel's device table only when the size
encoded in the IOMMU device-table register matches
pci_seg->dev_table_size. A mixed rollout disagrees: the unpatched
kernel uses the IVRS-derived size and the patched kernel uses 2MB,
so __reuse_device_table() rejects the table. On SNP-capable IOMMUs
that rejection panics the kdump kernel. Kernels that both have this
patch agree on 2MB and reuse succeeds. Update the production kernel
and the crash kernel together. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Require a buffer of two URBs
usx2y_urb_capt_retire() wraps the ring buffer once per packet and
usx2y_urb_play_prepare() once per URB of nr_of_packs() packets of up to
50 frames. Both assume that the data fits in the buffer, and the hw
constraints only require about two 1 ms periods, so a packet larger
than the buffer on capture, or a URB larger than the buffer on playback,
violates that assumption.
Constrain SNDRV_PCM_HW_PARAM_BUFFER_SIZE in snd_usx2y_pcm_open() to at
least two URBs, 2 * nr_of_packs() * 50 frames, for both directions. The
bound is in frames and derived from the driver's own packet limit, so it
does not read the endpoint, whose altsetting is only selected in
prepare. Two URBs rather than one, because the position advances by a
URB on playback and only moves when a URB is less than the whole buffer.
Keep a guard in usx2y_urb_capt_retire() that drops a packet larger than
the buffer, for the case the constraint makes unreachable.
With nrpacks above about 163 (S16_LE) or 109 (S24_3LE) the bound exceeds
the 64 KiB buffer the substream preallocates (twice that with the
preallocation raised to its 128 KiB maximum), so hw_params fails for
those module settings. That is intended: the driver cannot be safe with
a URB larger than half the largest buffer.
Reproduced on 7.3-rc7 with a USB/IP device presenting the US-122
interface layout and 1024-byte packets into a 512-byte capture buffer:
BUG: KASAN: out-of-bounds in i_usx2y_urb_complete+0x1285/0x1ac0
Read of size 18446744073709551104 at addr ffff88800e448800 by task vhci_rx/83
Tested on 7.3-rc7 with the same device, S16_LE at 44100 Hz, nrpacks 4,
so the bound is 400 frames. A 128-frame capture buffer and a 200-frame
playback buffer are refused at hw_params with EINVAL. A 400-frame buffer
streams for 30 s in each direction with the position advancing inside
the buffer and no KASAN report; the capture guard did not fire. The
same 400-frame capture buffer with S24_3LE, which selects altsetting 2
in prepare, streams for 30 s with the same result. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: Reject capture buffers smaller than two packets
line6_capture_copy() splits the copy into the ALSA ring buffer once at
the buffer end and wraps pos_done once, which is only correct when one
packet holds at most buffer_size frames. The packet size comes from the
device's endpoint, and the per-device hw structs allow 64-byte periods
with periods_min 1, so a packet can be larger than the whole buffer.
audio_in_callback() logs an oversized packet and then copies it anyway.
The packet size is known at probe time, so constrain
SNDRV_PCM_HW_PARAM_BUFFER_BYTES in snd_line6_capture_open() to at least
twice the larger of the two endpoints' packet sizes. Two rather than
one, because pos_done advances by the packet and wraps once, so a buffer
of exactly one packet leaves the position unchanged after every packet.
hw_params then rejects a buffer that cannot hold two packets, and the
single wrap is valid for every configuration that gets through. Keep a
guard in line6_capture_copy() that drops an oversized packet with a
ratelimited error, for the case that should no longer be reachable.
Reproduced on 7.3-rc7 with a USB/IP device presenting the GuitarPort
interface layout and 1024-byte packets into a 128-byte buffer: ALSA
logged "invalid position: pos = 224, buffer size = 32" and the driver
logged "driver bug: len" on every following packet. With this patch a
1024-byte buffer is refused at hw_params, and a 2048-byte buffer streams
for 30 s with no report and with the position moving inside the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject a negative TCP header offset in qdisc_pkt_len_segs_init()
qdisc_pkt_len_segs_init() stores skb_transport_offset(), or the inner
offset, in the unsigned hdr_len. A header in front of skb->data gives a
negative offset. For an offset a little below zero, pskb_may_pull() gets a
small length and succeeds. Then a 64-bit kernel reads the TCP header far
after the skb and can crash. Further below zero pskb_may_pull() fails.
Commit 28a57fb2c5df ("net: iptunnel: fix stale transport header during
tunnel decapsulation") fixed one source of such offsets. Other code that
removes bytes from the front of a packet can leave the same stale header.
Return SKB_DROP_REASON_SKB_BAD_GSO for a negative offset in the TCP branch.
SKB_GSO_UDP_L4 and the other GSO types read no header and still get a wrong
qdisc_pkt_len(). On a 64-bit kernel only packets that cause the read after
the skb today get a new result. Then __dev_queue_xmit() drops them and
returns -EINVAL, but sch_handle_ingress() ignores the result. Their content
can be valid. Thus the code that leaves the header stale needs its own fix. |
| Improper Validation of Unsafe Equivalence in Input vulnerability in Liquid Web / StellarWP GiveWP give allows Authentication Bypass.This issue affects GiveWP: from n/a through 4.16.9. |
| A flaw was found in xdgmime. A heap-based buffer overflow can be triggered in _xdg_mime_magic_parse_magic_line() in the xdgmimemagic.c file on little-endian systems when an attacker-controlled MIME magic file in a user-writable XDG data location (e.g., in the $XDG_DATA_HOME/mime/magic path) is parsed by an application performing MIME type detection (e.g., via g_content_type_guess()). When performing byte-swap, incorrect pointer arithmetic on the write side causes an out-of-bounds write of 2 bytes, resulting in an application crash or memory corruption. |
| GPAC before 26.07.0 contains a stack-based buffer overflow vulnerability in gf_filter_pid_resolve_file_template_ex() in src/filter_core/filter_pid.c that allows local attackers to write past fixed GF_MAX_PATH stack buffers. Attackers can convince a user to segment a crafted NHML input referencing an overly long media file name with MP4Box -dash to crash the process. |
| GPAC before 26.07.0 contains a heap-based buffer overflow in gf_mpd_resolve_url() in src/media_tools/mpd.c that allows attackers to write past a heap buffer via crafted DASH manifests. Attackers can supply a crafted MPD whose segment template expands beyond the allocation through unchecked strcat() calls, crashing MP4Box and causing denial of service. |
| GPAC before 26.02.0 contains an out-of-bounds read vulnerability in m2tsdmx_send_packet() in src/filters/dmx_m2ts.c caused by double-skipping the VC-1 start-code offset. Attackers can supply a crafted MPEG-2 TS VC-1 stream that underflows the remaining length, causing memcpy() to over-read and crash MP4Box on import. |
| A flaw has been found in Konstanty libmodplug up to 0.8.9.1. The affected element is the function abc_add_drum of the file src/load_abc.cpp of the component ABC File Handler. Executing a manipulation can lead to out-of-bounds read. The attack may be performed from remote. Upgrading to version 0.8.9.2 is sufficient to fix this issue. This patch is called 540f0b8ec3d7979e17a8d6a55e31b8a7b734d463. It is recommended to upgrade the affected component. |
| Heap-based buffer overflow in Windows ALPC allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Universal Plug and Play (upnp.dll) allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Message Queuing allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Stack-based buffer overflow in Windows DNS allows an unauthorized attacker to execute code over a network. |
| Buffer over-read in Microsoft Edge (Chromium-based) allows an authorized attacker to execute code over a network. |