Export limit exceeded: 429137 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26530 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99344 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e. mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN unfortunately allows the nonsensical combination, i.e. doesn't fail, but KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME is set. Breaking that invariant can lead to a variety of issue, particularly in MMU code that keys off EFER.LMA when determining whether to emulate/virtualization 4/5-level paging versus PAE paging.
CVE-2026-99343 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bug the VM if KVM attempts to walk more levels than the MMU has Extend the "EFER.LMA && !CR4.PAE" check, which exists largely to guard against KVM configuring a paging32 MMU with more than 2 levels of paging, with a very explicit check for exactly that: that KVM isn't trying to walk more levels of paging than the MMU template provides. I.e. harden KVM against all bugs that would cause KVM to generates accesses beyond the bounds of guest_walker's arrays, regardless of how KVM ended up with the misconfigured MMU. Note, don't use w->cpu_role.base.level directly as the paging64 template only provides two levels of page tables for PAE paging on 32-bit hosts, and handles the third level by manually emulating the PDPTR access.
CVE-2026-99342 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration Xen's map_guest_area() enforces that vcpu_info is aligned to sizeof(xen_ulong_t). KVM has no such check, allowing a guest to register vcpu_info at an arbitrary byte alignment. Enforce unconditional 4-byte alignment regardless of the current shinfo mode. This is sufficient because subsequent commits ensure that all locked atomic operations on vcpu_info fields use at most 32-bit accesses. Return -ENXIO on failure, matching Xen's map_guest_area() behaviour for unaligned requests. Originally observed in review of an unrelated patch: https://lore.kernel.org/all/20260604193554.1BA311F00893@smtp.kernel.org/
CVE-2026-99341 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Request event processing for exception VM-Exits Request event processing whenever kvm_queue_exception_vmexit() queues an exception VM-Exit. Most callers reach the helper through kvm_multiple_exception(), which already sets KVM_REQ_EVENT, but nested asynchronous page faults call it directly. Without another event request, vcpu_enter_guest() skips kvm_check_and_inject_events() and re-enters L2. A subsequent VM-Exit can clear the pending exception while reconstructing vectoring state, losing the synthetic #PF VM-Exit. The APF reason remains PAGE_NOT_PRESENT and a later regular #PF can consume the stale value. Setting KVM_REQ_EVENT in the common helper ensures that L1 receives the queued VM-Exit before KVM re-enters L2.
CVE-2026-99340 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Take SRCU in kvm_zap_gfn_range() kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to reschedule. Callers that do not already hold kvm->srcu (or slots_lock) can race with memslot deletion: synchronize_srcu_expedited() does not wait, kvm_free_memslot() frees the old slot and its rmap, and the zap resumes on freed memory. The VFIO noncoherent-DMA path hits this by zapping the entire GPA space without SRCU. KASAN reported: BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0 Read of size 8 at addr ffffc900005c1008 Call Trace: slot_rmap_walk_next+0x82/0x1c0 __kvm_rmap_zap_gfn_range+0x17a/0x280 kvm_zap_gfn_range+0x2a6/0x6a0 kvm_vfio_set_attr+0x576/0x770 kvm_device_ioctl+0x1ff/0x3b0 Take SRCU inside kvm_zap_gfn_range() so every caller is covered. Nesting with an existing kvm->srcu critical section is fine; the helper uses a local index. Drop the now-redundant SRCU pair from __kvm_set_or_clear_apicv_inhibit().
CVE-2026-99339 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Zero reserved synic flags when delivering message to avoid stack leak Ensure all reserved flags are zeroed when setting the msg_pending flag as part of SynIC message delivery, as setting only msg_pending can leak seven bits of kernel stack data to the guest. E.g. gcc typically uses a bitwise-OR to set the msg_pending flag, without initializing the on-stack variable. Precisely zero the flags, e.g. as opposed to zeroing the entire structure, to make it somewhat more obvious that the flags *need* to be zeroed. E.g. it would be quite easy to misread the initial read of guest memory and think that zeroing the entire structure is completely superfluous.
CVE-2026-99338 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Notify VM exit Enable Notify VM exit functionality for TDX guests. Notify VM exit is an existing feature supported by KVM. Userspace can enable Notify VM exit through KVM_CAP_X86_NOTIFY_VMEXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Notify VM exit for TDX guests by: - Invoking TDX module API calls to set NOTIFY_VM_EXITING and Notify Window in TD VMCS. It's done in tdx_vcpu_init() where other TD VMCS bits are set. Since TDX vCPU cannot be reset, it only needs to be configured once when initializing the TDX vCPU. - Adding corresponding exit handler for TDX Notify VM Exit. Notify VM exit can happen when executing the IRET instruction. If the IRET unblocks the NMI blocking state, bit 12 of the exit qualification is set. In this case, the VMM needs to restore the "blocked by NMI" state when it decides to re-enter the guest. For TDX, KVM cannot manage the GUEST_INTERRUPTIBILITY_INFO and it's TDX module's responsibility to handle it. Extract the common part without NMI blocking handling into a helper in common.h so that it can be shared between VMX and TDX. Note, KVM uses "pre-production" terminology for the feature formally called Notify VM-Exit. All public versions of the SDM refer to the feature as Instruction Timeout. This will be remedied in the near future, for now, use KVM's terminology for consistency. Note, #2, there is no enumeration bit for Notify VM exit by TDX module because all TDX modules support it, and allow to set the corresponding TD VMCS fields as long as the hardware supports the feature.
CVE-2026-99337 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Enable Bus Lock VM exit Enable Bus Lock VM exit functionality for TDX guests. Bus Lock VM exit is an existing feature supported by KVM. Userspace can enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's reported as supported. However, KVM reports the support of this CAP just based on the hardware capability but doesn't differentiate between VMX and TDX. This leads to the issue that userspace can enable this cap for TDX guests without getting an error, but the feature is not actually enabled because KVM doesn't call the TDX module API to program the relevant TD VMCS fields. Enable Bus Lock VM exit for TDX guests by programming the BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler. Note, there is no enumeration bit for this feature by TDX module because all TDX modules support it and allow to set the TD VMCS as long as the hardware supports the feature.
CVE-2026-99336 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: take the invalidate lock when unbinding a dying file kvm_gmem_unbind() takes mapping->invalidate_lock only if the get_file_active() succeeds. When the guest_memfd file is dying, its reference count is already zero so get_file_active fails and the binding is removed without holding the invalidate lock. kvm_gmem_invalidate_{start,end}() checks f->bindings independently to decide whether to begin or end KVM MMU invalidation. So, the bindings must therefore remain stable between the two calls. Otherwise, unbind can remove a binding after start increments mmu_invalidate_in_progress, but before end finds the binding and decrements it. Example, unbind race with memory failure: CPU 0: memory failure CPU 1: memslot delete ---------------------------------- --------------------------- (guest_memfd file is dying) kvm_gmem_error_folio() kvm_gmem_invalidate_start() finds binding mmu_invalidate_in_progress++ kvm_gmem_unbind() get_file_active() fails removes binding kvm_gmem_invalidate_end() no binding found counter stays elevated mmu_invalidate_retry() then returns 1 forever, so guest page faults retry without ever installing a mapping and the guest hangs. Remove the distinction between live and dying files in the unbind path. Always use slot->gmem.file and take the invalidate lock when it's non-NULL. Normal unbind callers hold slots_lock, which prevents release from clearing the pointer or freeing the file state until unbind completes. Final VM teardown can only see a NULL pointer because guest_memfd pins the KVM until release has cleared all bindings.
CVE-2026-99335 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready Wait to bind a memslot to a guest_memfd instance until *after* the memslot is fully prepared, as creating the binding in guest_memfd will effectively expose the memslot to readers. As pointed out by Sashiko, binding the memslot before it's ready to be exposed to the rest of the world can break various memslot assumption and rules. E.g. x86 could observe a NULL rmap pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created, but before KVM made it through kvm_prepare_memory_region().
CVE-2026-99334 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with preemption disabled, because it can return with HPTE_V_HVLOCK still held until the caller later unlocks the HPTE. Existing virtual-mode callers in book3s_64_mmu_hv.c already follow that rule. Two virtual-mode call paths do not: 1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode data-side and instruction-side faults after guest exit, with preemption already enabled. kvmppc_hpte_hv_fault() calls kvmppc_hv_find_lock_hpte() directly. 2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled. The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(), and H_ENTER also reaches kvmppc_do_h_enter(), which uses arch_spin_lock() on kvm->mmu_lock. That raw lock choice is intentional because kvmppc_do_h_enter() is also used by real-mode callers, so the correct fix is to establish the proper preemption context at the virtual-mode caller boundary. If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other thread on the same CPU trying to acquire the same bit-lock can spin indefinitely. The same applies to lock_rmap() users and to the H_ENTER path while holding the raw mmu_lock. Fix this by adding preempt_disable()/preempt_enable() pairs around the two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and around the kvmppc_pseries_do_hpt_hcall() invocation in kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that perform page faults, blocking memory allocations, or context switches.
CVE-2026-99333 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Use report type from request node Use report type from request node while sending feature and input reports to HID core. The cli_data report type array is never assigned and feature reports are sent as input reports.
CVE-2026-99285 1 Linux 2 Linux, Linux Kernel 2026-11-19 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_byteorder: remove multi-register support 64bit byteorder conversion is broken when several registers need to be converted because the source register array advances in steps for 4 bytes instead of 8: for (i = ... src64 = nft_reg_load64(&src[i]); ~~~~~ u32 *src nft_reg_store64(&dst64[i], Remove the multi-register support, it has other issues as well: Pablo points out that commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") alters semantics: before the loop operated on registers, i.e. for ( ... ) dst32[i] = htons((u16)src32[i]) .. but after the patch it will operate on bytes, which makes this useless to convert e.g. concatenations, which store each compound in its own register. Multi-convert of u32 has one theoretical application: ct mark . meta mark . tcp dport @intervalset Because ct mark and meta mark are host byte order, use with intervals has to convert the byteorder for ct/meta mark value to network byte order (bigendian). nftables emits this: [ meta load mark => reg 1 ] [ byteorder reg 1 = hton(reg 1, 4, 4) ] [ ct load mark => reg 9 ] [ byteorder reg 9 = hton(reg 9, 4, 4) ] ... I.e. two separate calls. Theoretically it could be changed to do: [ meta load mark => reg 1 ] [ ct load mark => reg 9 ] [ byteorder reg 1 = htonl(reg 1, 4, 8) ] ... But then all it would take to change the set to meta mark . tcp dport . ct mark ... and we'd be back to two "byteorder" calls. IOW, support to convert a range of registers is both dysfunctional and dubious. Simplify this: remove the feature. Pablo Neira Ayuso points out that nftables before 1.1.0 can generate incorrect byteorder conversions, see 9fe58952c45a, "evaluate: skip byteorder conversion for selector smaller than 2 bytes" in nftables.git). Affected rulesets fail to load with this change and old userspace due to 'len != size' check.
CVE-2026-99320 1 Linux 1 Linux Kernel 2026-11-19 7 High
In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().
CVE-2026-99317 1 Linux 2 Linux, Linux Kernel 2026-11-19 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: hwdep: Serialize DSP load requests The check of the loaded DSP indices and the call of the driver's dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep file descriptor can be shared among threads, or inherited across fork, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both observe the index as unloaded and enter the driver's callback concurrently, even though the device itself is opened exclusively. This breaks the assumption behind hw->dsp_loaded that a firmware index is loaded only once. For example, snd-usb-usx2y hits WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may allocate the US-428 sequence URBs twice. Serialize the check, the callback invocation and the bookkeeping with a per-hwdep mutex, so that the second request returns -EBUSY.
CVE-2026-99316 1 Linux 2 Linux, Linux Kernel 2026-11-19 7 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Initialize idle URBs before submitting streams usb_stream_start() submits the first two capture and playback URBs and only afterwards assigns sk->idle_inurb, sk->idle_outurb, sk->completed_inurb and sk->completed_outurb to the remaining two URBs of each direction. A transfer can complete as soon as usb_submit_urb() has been called, so the completion handler i_capture_start() or i_playback_start() may run before those pointers are set. While the stream is still being synchronized (state below usb_stream_sync1), stream_start() then calls playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still NULL, and the packet descriptors are written through that NULL pointer: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33 Call Trace: <IRQ> stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596 i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654 __usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657 usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691 tasklet_hi_action+0xa/0x20 kernel/softirq.c:994 handle_softirqs+0x16f/0x440 kernel/softirq.c:645 </IRQ> The four URBs referenced by these pointers are allocated long before and do not depend on any transfer state, so assign them before the submit loop. Keeping the assignment inside the retry path also restores a well-defined URB rotation when the start frame mismatch handling kills and resubmits the streams.
CVE-2026-99313 1 Linux 2 Linux, Linux Kernel 2026-11-19 8.8 High
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.
CVE-2026-99312 1 Linux 2 Linux, Linux Kernel 2026-11-19 8.8 High
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').
CVE-2026-99310 1 Linux 2 Linux, Linux Kernel 2026-11-19 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: nfsd: hold cl_lock in client_has_openowners() client_has_openowners() walks clp->cl_openowners and reads so_stateids without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched creds can use-after-free the nfs4_openowner. BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140 fs/nfsd/nfs4state.c:3718 client_has_openowners() nfsd4_exchange_id nfsd4_proc_compound nfsd_dispatch svc_process Take clp->cl_lock while client_has_openowners() walks the openowner list.
CVE-2026-99309 1 Linux 2 Linux, Linux Kernel 2026-11-19 8.8 High
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix overflow in dacloffset bounds check in build_sec_desc() When the large dacl_offset is provided, dacl_offset + sizeof(struct smb_acl) overflows on 32-bit builds and the check is passed, Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So the oob read is max 8 bytes preceding the allocated ppntsd. unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset); int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset; if (!dacl_offset || (dacl_offset + sizeof(struct smb_acl) > ppntsd_size)) goto out; Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check") fixes similar checks in other functions. But leaves this one out, because it is only valid for 32-bit builds. Reproduced on 32-bit ARM with KASAN, by a client sending SMB2 SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the same file: BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105) Read of size 2 at addr c2a273fa by task kworker/1:1/35 CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5 Workqueue: ksmbd-io handle_ksmbd_work Call trace: kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105) build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676) smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160) handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401) process_one_work from worker_thread (kernel/workqueue.c:3473) worker_thread from kthread (kernel/kthread.c:436) Add overflow check.