| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LightSAML implements SAML 2.0 data model classes, XML serialization and deserialization, XML security, certificate support, and message bindings. Prior to 4.7.1 and 5.0.1, LightSAML and xmlseclibs disagree about which assertion an inbound SAML signature covers. `Response::deserialize` uses `manyElementsFromXml` to collect only direct-child `saml:Assertion` elements of `samlp:Response`, and `AssertionSignatureValidatorAction` validates their `ds:Signature` using an out-of-band trusted IdP credential resolved by Issuer, not a key from the document. `XMLSecurityDSig::validateReference()` removes the enveloped signature from the shared DOM, but `processRefNode()` resolves `Reference URI="#id"` document-wide through an XPath of the form `//*[@Id]` and takes `item(0)`, which need not be the assertion whose claims LightSAML consumes. An attacker who has captured one genuinely signed assertion, such as an earlier login response, can place its signature-stripped bytes earlier in `samlp:Extensions` and present a forged direct-child assertion with the same ID and copied genuine signature. Validation then covers the hidden genuine bytes while LightSAML surfaces unsigned attacker-controlled `Subject/NameID`, `Conditions`, and `Attributes`, enabling authentication bypass or privilege escalation even when signature validation is required. The behavior was confirmed in versions 5.0.0 and 4.6.1. This issue is fixed in versions 4.7.1 and 5.0.1. |
| @better-auth/expo before 1.7.16 allows certain account-takeover outcomes (e.g., unauthenticated changes of any account's email address), because it signs a caller-supplied state value without checking whether that value had been issued by the server. NOTE: the application secret must be rotated after updating to a fixed version. |
| An Insufficient Verification of Data Authenticity vulnerability in PCLI in Juniper Networks Session Smart Router and Session Smart Conductor allows an attacker with write access to the model cache directory to execute arbitrary code and escalate privileges via the processing of unverified cache files. |
| Emerson Ovation
was found to have no authentication of firmware signing and relies on an insecure checksum for integrity. This could allow an attacker to push malicious firmware images, cause a denial-of-service condition, or achieve remote code execution. |
| Business::GoCardless versions before 1.01 for Perl accept forged webhooks when a configured webhook secret is undef or empty.
signature_valid uses each configured secret as the HMAC key, and nothing rejects undef or an empty string, both of which Digest::SHA treats as an empty key. A secret read from an unset environment variable, or an empty entry in a list of rotated secrets, is used as is.
A remote attacker can sign a forged webhook with an empty key and have it accepted as sent by GoCardless. |
| The `GITEA_TOKEN` of a Gitea Actions job authenticates as the `gitea-actions` system user, and the `/api/v1/user` email and GPG key endpoints accepted that user, so a job could register an email address and a GPG key on it; without required email confirmation (the default) the address is stored as activated. Commit verification treats a key without a real owner as the instance signing key, so any user who can run a workflow job could make commits signed with their own key show as trusted and signed by the instance in every repository where they appear, including pull requests to repositories the user cannot write to. The impact is limited to the displayed signature status: enforcement such as required signed commits only checks that a signature is verified and is unaffected, and no access is gained. The `/api/v1/user` routes now reject system users. |
| A flaw was found in the SAML adapter component of Keycloak, which is used to secure applications with SAML-based authentication. The adapter fails to verify that the issuer of a signed SAML assertion matches the expected identity provider configured for the application. If multiple identity providers share the same trusted signing key, an attacker who controls one of those providers can create a validly signed assertion to log into the application as any user, potentially gaining full administrative control. |
| Zuke is a code-first, strongly typed build automation system for Deno. Prior to 1.10.0, the @zuke/gh githubWorkflow(...) gate correlates a dispatched workflow run using only a display-title marker that is visible in the workflow run list and can be copied by another dispatcher. In configurations where the external workflow repository grants workflow_dispatch permission to a party not equally trusted by the releasing repository, an attacker can dispatch a run with the marker and cause the gate to adopt its conclusion without verifying the event, ref, or creation window. A passing substituted run can authorize an unvalidated release, while a failed or cancelled run can block a valid release, and the persisted adopted run ID preserves the substitution across build resume. This issue is fixed in version 1.10.0. |
| Google::Auth versions from 0.11 through 0.12 for Perl accept an authorization code from any local process because the gcloud-auth login callback does not check the OAuth state.
The gcloud-auth login and application-default login commands send a state parameter with the authorization request, then take the code from the first request to reach their loopback listener without comparing the returned state.
A local attacker can submit an authorization code for their own Google account. The CLI exchanges it and stores the refresh token as the user's credentials, so the user's tools then act as the attacker's account. |
| Improper Verification of Cryptographic Signature vulnerability in Drupal Commerce Stripe allows Signature Spoof. This issue affects Commerce Stripe versions: from 0.0.0 to 1.4, from 2.0.0 to 2.2.3. |
| A security vulnerability has been detected in Presenton up to 0.9.11-beta. Impacted is the function JSON.parse of the file /api/user-config of the component User Configuration Handler. Such manipulation leads to cross-site request forgery. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 0.9.12-beta is recommended to address this issue. The name of the patch is 44c8a61122b21f17642d717b0c4d6f2c54c0f180. It is recommended to upgrade the affected component. |
| In mutt and neomutt the In-Reply-To email header field is not protected by cryptographic signing which allows an attacker to reuse an unencrypted but signed email message to impersonate the original sender. |
| GPUStack is an open-source GPU cluster manager for AI model serving and GPU instance provisioning. From 0.7.1 until 2.2.2, the /auth/saml/callback endpoint decoded SAML XML, used its NameID and attributes to resolve or provision a user, and minted a gpustack_session JWT without calling OneLogin_Saml2_Auth.process_response to verify the signature, issuer, audience, destination, or time conditions. Any network client could submit an identity for an existing user, including an administrator, or provision a new non-administrator account, even when SAML was not configured. Response and Assertion identifiers were not consumed, so captured signed responses could also be replayed. This issue is fixed in version 2.2.2. |
| A flaw was found in the Kerberos federation provider of Keycloak, an open-source identity and access management solution. When Kerberos password authentication is used without SPNEGO, the system fails to verify the identity of the Key Distribution Center (KDC) by requesting a server ticket. This allows an attacker on the same network to spoof the KDC and bypass the authentication process, potentially gaining unauthorized access to user accounts. |
| Incus is a system container and virtual machine manager. Prior to version 7.2.0, an arbitrary file write exists in the Incus client when a malicious image server returns a crafted `Incus-Image-Hash` header. This can lead to arbitrary command execution as root on the server. Version 7.2.0 patches the issue. |
| A flaw was found in the jwcrypto library, which is used for implementing Javascript Object Signing and Encryption (JOSE) standards. The issue occurs when the library verifies a General JSON Serialization JWS using a set of keys. Due to a coding error, the library fails to correctly identify the specific key ID (kid) and may instead accept a signature made by any valid key in the set. This can allow an attacker with a valid key to bypass authorization checks in applications that rely on the key ID to identify specific tenants or users. |
| russh is a Rust SSH client and server library. From version 0.34.0-beta.1 until version 0.64.0, its SSH server does not require the signature algorithm in a public-key authentication signature to match the algorithm named in the authentication request. A client possessing an authorized RSA private key can announce rsa-sha2-512 while supplying a valid ssh-rsa SHA-1 signature, bypassing restrictions or producing misleading audit records when applications rely on the requested algorithm. A valid private-key signature remains required, and russh clients are not affected. This issue is fixed in version 0.64.0. |
| A Kafka broker that authenticates clients with SASL/OAUTHBEARER using the bundled JWKS-backed validator always verifies the JWT signature, but two further checks are only performed when explicitly configured:
- The issuer (iss) claim is verified only when sasl.oauthbearer.expected.issuer is set. When it is unset, a validly-signed token carrying the expected audience is accepted regardless of which issuer minted it.
- An audience (aud) claim is required only when sasl.oauthbearer.expected.audience is set. When it is unset, a validly-signed token that omits the aud claim is accepted. (A token that carries an aud claim is
still rejected when no expected audience is configured.)
Both options default to unset and have been documented as optional (Importance LOW) since KIP-768 (3.1.0).
Impact:
The exposure is realizable mainly in deployments whose JWKS endpoint serves signing keys for more than one issuer (a multi-tenant identity provider, an aggregated/shared JWKS, or shared signing keys): a token
minted for a different issuer, or a token lacking an audience, may be accepted to authenticate — potentially as a higher-privileged principal. In a single-issuer deployment where the provider controls the iss
claim and issues audience-scoped tokens, exposure is limited. The signature trust anchor remains enforced in all cases. This is distinct from CVE-2026-33557 (acceptance of unsigned/unvalidated tokens); here the
signature is validated and only the issuer/audience checks are not enforced by default.
Mitigation (all affected versions, no upgrade required):
Set both sasl.oauthbearer.expected.issuer (to your provider's exact iss value) and sasl.oauthbearer.expected.audience (to the audience(s) your brokers expect), per listener. Brokers that set these perform
exact-match issuer/audience checks and are not affected. Both have been available since 3.1.0.
Resolution:
- From Apache Kafka 4.4.0: a broker configured with a JWKS endpoint fails to start unless both sasl.oauthbearer.expected.issuer and sasl.oauthbearer.expected.audience are set (secure by default). Deployments that
intentionally do not restrict the issuer and/or audience may opt out per axis with sasl.oauthbearer.allow.unverified.issuer=true and/or sasl.oauthbearer.allow.unverified.audience=true. |
| CakePHP through 5.4.3 contains an improper cookie domain validation vulnerability in the Http Client CookieCollection that allows malicious servers to receive and plant cookies by abusing unanchored suffix matching. Attackers controlling a host such as one ending in a victim domain suffix, or sending Set-Cookie Domain values for unrelated hosts, can steal session cookies or inject cookies into shared client cookie jars. |
| Acceptance of extraneous untrusted data with trusted data vulnerability in OpenText Advanced Authentication Server allows Accessing Functionality Not Properly Constrained by ACLs.
This issue affects Advanced Authentication Server: from 6.4.0.0 through 6.4.3.8, from 6.5.0.0 through 6.5.0.10, and from 6.6.0.0 through 6.6.1.0. |