| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: rebind completed CREATE replays without draining the old channel
A completed DurableHandleReqV2 CREATE can be replayed through another
channel while its original channel is exiting. The existing replay path
returns the open but leaves its connection and oplock references pointing
at the old channel. Its open count also stays on that channel, and a
later CLOSE through the surviving channel decrements the wrong counter.
After checking the owner, lease key and persistent flag, verify that an
active open is still published in the requesting session's file table.
Do this even when no oplock was granted, and before processing a consumed
replay. Do not read a borrowed opinfo session pointer for this check.
Keep a healthy original binding. If the original channel is exiting or
releasing, move the open and its own oplock references to the requesting
channel. Serialize this with CLOSE using the session file-table lock,
and with detach, reconnect and notification snapshots using m_lock.
The earlier lock index and lease-table changes make their lifetimes
independent of this connection change. No old-channel r_count wait is
needed, including when an unrelated request remains active there.
Account final close against fp->conn in one place, balance durable detach
and reconnect, and transfer the count with a replay binding change. A
final global lookup put may run after CLOSE has removed the volatile id;
unlink the open from the inode list on that final close as well.
A live completed CREATE replay may follow a break that lowered the
durable open's batch oplock. Apply the batch eligibility check only to
detached reconnects, while retaining the owner, lease key and persistent
flag checks for active replays. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix invalid pointer dereference when get_inode_acl() fails
When get_inode_acl() fails, it returns an ERR_PTR(), but
ksmbd_acls_fattr() stored that pointer in smb_fattr without
checking for errors. Later callers then passed the error pointer
to security descriptor helpers or posix_acl_release(), resulting
in an invalid pointer dereference.
This was reproduced on an XFS-backed share when xfs_get_acl()
returned ERR_PTR(-ENOMEM). Querying the SMB ACL from a CIFS client
triggered the crash:
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: smb_acl_sec_desc_scratch_len+0x58/0x90 [ksmbd]
Call Trace:
smb2_query_info+0x40d/0x17c0 [ksmbd]
handle_ksmbd_work+0x1ca/0x770 [ksmbd]
Fix this by checking the return values from get_inode_acl() in
ksmbd_acls_fattr(). Treat -EOPNOTSUPP as indicating that no ACL is
available, and propagate all other errors to the callers. Update
smb2_open() and smb2_get_info_sec() to handle these errors. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix out-of-bounds read when padding the final compound response
Compound response handling pads the last response of a compound to an
8-byte boundary by growing the final iov and the RFC1002 length.
smb2_allocate_rsp_buf() allocates exactly response_sz. A command can
fill the response buffer to within 7 bytes of its end, for example a
QUERY_INFO whose output is bounded only by the space left. The padding
can then run past the allocation, and ksmbd_tcp_writev() reads those
bytes when it sends the response.
BUG: KASAN: slab-out-of-bounds in _copy_from_iter+0x744/0x10e0
Call Trace:
_copy_from_iter+0x744/0x10e0
tcp_sendmsg_locked+0x2290/0x3f80
ksmbd_tcp_writev+0x10c7/0x1ab0 [ksmbd]
Allocate room for the padding when the request is a compound, as
smb2_read() and smb2_read_pipe() do for their payloads. response_sz is
unchanged, so commands still fill only up to it, and kvzalloc() zeroes
the padding. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go-s: Add suspend function and gate access under bool.
Currently a device can suspend while delayed work is pending or
executing. Cancel delayed work if it was pending and restart it if it
hasn't run yet. Gate access to show/store functions behind a bool to
prevent access prior to cfg_setup() being completed. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go-s: Prevent deadlock if device removed during setup
hid_gos_cfg_remove() calls a mutex before canceling delayed work. That
delayed work function calls mcu_property_out(), which holds the same mutex.
Prevent deadlock my removing the mutex prior to stopping the work.
Additionally, since cancel_delayed_work has the potential to re-arm,
switch to disable_delayed_work. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: kovaplus: reject short button reports
The raw event callback runs before HID core validates and zero-pads the
report. It passes the buffer to helpers which inspect data[0] and read a
complete struct kovaplus_mouse_report_button for button reports. A
truncated report can therefore cause an out-of-bounds read.
Require enough data for the button report before calling either helper.
Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init
sequence") added the same kind of raw-event length validation to hid-asus. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: picoLCD: check for fb_deferred_io_init() error
fb_deferred_io_init() allocates deferred I/O state, populating
info->fbdefio_state, or leaving it NULL if an error occurs.
Currently picolcd_init_framebuffer() ignores its return value.
Therefore if an error arises in fb_deferred_io_init() (for instance, due
to an allocation failure) info->fbdefio_state is left NULL.
When the file is subsequently opened, fb_open() will dereference a NULL
pointer (calling fb_deferred_io_open()).
Fix this by checking for the error.
Also correct cleanup ordering - defio is initialised after the sysfs file,
so cleanup defio first. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: always initialize and cancel init_work
The writable gpio_mode_enforce parameter can change between probe and
remove.
If it changes from false to true after probe, remove skips cancellation
of init_work. Pending or running work can then access devm-managed
driver state after teardown. Changing it from true to false can make
remove cancel an uninitialized delayed work item.
Initialize init_work whenever IIO is reachable and cancel it
unconditionally on remove. Keep the parameter check only for scheduling
the initialization.
The false-to-true cancellation gap was previously reported by Sashiko.
We also encountered this issue during our static-analysis research. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2200: validate READ_ALL response length
The HID core invokes raw_event callbacks before validating the report
length. mcp2200_raw_event() casts a READ_ALL response to struct
mcp_read_all_resp and reads fields through offset ten without checking that
the response contains the structure.
A one-byte READ_ALL response reproduced the issue under KASAN:
BUG: KASAN: slab-out-of-bounds in mcp2200_raw_event+0x24b/0x3a0
Read of size 1 by task hidtrigger/89
Call Trace:
mcp2200_raw_event+0x24b/0x3a0
kasan_report+0x139/0x170
Reject an incomplete READ_ALL response with a protocol error before reading
its fields. The common completion path then wakes the command waiter with
the error instead of leaving it to time out.
Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init
sequence") added the same kind of raw_event length validation to hid-asus. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: cp2112: validate response report lengths
The HID core invokes raw_event callbacks before validating the report
length. cp2112_raw_event() reads every field of a transfer status response
without checking size. For a data response, it reads the length at offset
two and copies that many bytes from offset three, again without ensuring
that the input report contains them.
Require a complete transfer status structure. For data responses, first
require the header and then ensure the clamped payload length fits in the
received report before copying it.
Commit 47669bec44fe ("HID: asus: refactor the two workqueues and init
sequence") added the same kind of raw_event length validation to hid-asus. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: Fix out-of-bounds left shift by 32 in s32ton()
Syzbot reported an out-of-bounds shift (32-bit integer shifted left by
32) in the s32ton() routine in the HID core. This routine converts a
signed 32-bit integer to a signed n-bit integer, and it caps the value
of n at 32. But when n == 32 there's no need to do anything; it can
simply return the input value. This will avoid calculating (1 << n)
when n is 32, which was the cause of the invalid shift. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Use report type from request node
Use report type from request node while sending feature and input reports
to HID core. The cli_data report type array is never assigned and
feature reports are sent as input reports. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Add preempt_disable() around virtual-mode HPTE bit-lock users
kvmppc_hv_find_lock_hpte() requires virtual-mode callers to run with
preemption disabled, because it can return with HPTE_V_HVLOCK still held
until the caller later unlocks the HPTE. Existing virtual-mode callers
in book3s_64_mmu_hv.c already follow that rule.
Two virtual-mode call paths do not:
1. kvmppc_handle_exit_hv() calls kvmppc_hpte_hv_fault() for hash-mode
data-side and instruction-side faults after guest exit, with
preemption already enabled. kvmppc_hpte_hv_fault() calls
kvmppc_hv_find_lock_hpte() directly.
2. kvmppc_pseries_do_hcall() executes virtual-mode handlers for HPT
hcalls via kvmppc_pseries_do_hpt_hcall() with preemption enabled.
The handlers for H_ENTER, H_REMOVE, H_READ, H_CLEAR_MOD, H_CLEAR_REF,
H_PROTECT, and H_BULK_REMOVE spin on try_lock_hpte() or lock_rmap(),
and H_ENTER also reaches kvmppc_do_h_enter(), which uses
arch_spin_lock() on kvm->mmu_lock. That raw lock choice is
intentional because kvmppc_do_h_enter() is also used by real-mode
callers, so the correct fix is to establish the proper preemption
context at the virtual-mode caller boundary.
If a vCPU thread is preempted while holding HPTE_V_HVLOCK, any other
thread on the same CPU trying to acquire the same bit-lock can spin
indefinitely. The same applies to lock_rmap() users and to the H_ENTER
path while holding the raw mmu_lock.
Fix this by adding preempt_disable()/preempt_enable() pairs around the
two kvmppc_hpte_hv_fault() call sites in kvmppc_handle_exit_hv(), and
around the kvmppc_pseries_do_hpt_hcall() invocation in
kvmppc_pseries_do_hcall(). Targeting only the HPT hcall helper avoids
wrapping non-HPT hcalls (such as H_RTAS, H_CONFER, H_REGISTER_VPA) that
perform page faults, blocking memory allocations, or context switches. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Establish memslot<=>guest_memfd bindings *after* memslot is ready
Wait to bind a memslot to a guest_memfd instance until *after* the memslot
is fully prepared, as creating the binding in guest_memfd will effectively
expose the memslot to readers. As pointed out by Sashiko, binding the
memslot before it's ready to be exposed to the rest of the world can break
various memslot assumption and rules. E.g. x86 could observe a NULL rmap
pointer if a PUNCH_HOLE hit the guest_memfd after the binding was created,
but before KVM made it through kvm_prepare_memory_region(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: take the invalidate lock when unbinding a dying file
kvm_gmem_unbind() takes mapping->invalidate_lock only if the
get_file_active() succeeds. When the guest_memfd file is dying, its
reference count is already zero so get_file_active fails and the binding
is removed without holding the invalidate lock.
kvm_gmem_invalidate_{start,end}() checks f->bindings independently to
decide whether to begin or end KVM MMU invalidation. So, the bindings
must therefore remain stable between the two calls. Otherwise, unbind
can remove a binding after start increments mmu_invalidate_in_progress,
but before end finds the binding and decrements it.
Example, unbind race with memory failure:
CPU 0: memory failure CPU 1: memslot delete
---------------------------------- ---------------------------
(guest_memfd file is dying)
kvm_gmem_error_folio()
kvm_gmem_invalidate_start()
finds binding
mmu_invalidate_in_progress++
kvm_gmem_unbind()
get_file_active() fails
removes binding
kvm_gmem_invalidate_end()
no binding found
counter stays elevated
mmu_invalidate_retry() then returns 1 forever, so guest page faults
retry without ever installing a mapping and the guest hangs.
Remove the distinction between live and dying files in the unbind path.
Always use slot->gmem.file and take the invalidate lock when it's non-NULL.
Normal unbind callers hold slots_lock, which prevents release from clearing
the pointer or freeing the file state until unbind completes. Final VM
teardown can only see a NULL pointer because guest_memfd pins the KVM until
release has cleared all bindings. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check for overflow when converting nr_pages to bytes in GUP-fast
The overflow check in gup_fast_fallback() only covers the addition to
start. The preceding nr_pages << PAGE_SHIFT can already have truncated
the length on 32bit.
Users such as RapidIO's rio_dma_transfer() can derive such page counts
from a 64-bit userspace length.
Let's just check_shl_overflow() to reject any such overflow with
-EOVERFLOW early. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast
With nr_pages == 0, GUP-fast still enters its page table walk and can
write past the caller's page array. The old end <= start check caught
empty ranges, but was replaced with an overflow check.
Users such as OrangeFS can pass a zero page count derived from a
userspace-supplied length. So let's return zero for nr_pages == 0 before
starting the walk, just like GUP-slow.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix zapping migration entries for device-private THPs
A PMD migration entry can refer to a device-private folio.
zap_huge_pmd_folio() checks the folio type instead of the entry type,
so it treats such a migration entry as a device-private entry.
Installing the migration entry already removed the reverse mapping and
dropped the mapping reference. Zapping it must not repeat those
operations. Concurrent MADV_DONTNEED during migration back to system
memory can trigger this.
Check the PMD entry type using pmd_is_device_private_entry().
Fix generated by an LLM and sent by Chris Mason in private.
[ david: simplify description ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg()
The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation
handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag
is done in mac80211, so the only place it is set is in
ieee80211_tx_dequeue().
This means that any frames that are sent to the driver via drv_tx() will
no longer have the flag set. In particular, this affects packets going
through ieee80211_tx_pending(). Evan reported that this can result in
the ath9k driver failing to account such packets in its block ack
window, eventually overrunning the window and stalling TX.
Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside
a valid block ack window. This should be harmless for the TXQ path, and
will reinstate the previous behaviour for drivers that use the flag as a
signal to track the packet in the window. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Publish the output fence outside of job_lock
job_lock is taken by the V3D interrupt handler, so nesting an IRQ-unsafe
lock under it creates an inversion. drm_syncobj_replace_fence() takes
drm_syncobj::lock, which other paths acquire with interrupts enabled. For
example, a thread interrupted while holding it blocks the handler on
job_lock, and the handler can only make progress once the submit path
releases job_lock, which it cannot do while waiting for drm_syncobj::lock.
This is reported by lockdep:
[ 188.139076] ========================================================
[ 188.139086] WARNING: possible irq lock inversion dependency detected
[ 188.139096] 7.3.0-rc3-00067-gc4f3feeaf60f #67 Tainted: G C
[ 188.139108] --------------------------------------------------------
[ 188.139116] swapper/0/0 just changed the state of lock:
[ 188.139125] ffff0000054f8ff8 (&vc4->job_lock){-...}-{3:3}, at: vc4_irq+0xa8/0x28c [vc4]
[ 188.139234] but this lock took another, HARDIRQ-unsafe lock in the past:
[ 188.139242] (&syncobj->lock){+.+.}-{3:3}
[ 188.139256] and interrupts could create inverse lock ordering between them.
[ 188.139267] other info that might help us debug this:
[ 188.139275] Possible interrupt unsafe locking scenario:
[ 188.139284] CPU0 CPU1
[ 188.139291] ---- ----
[ 188.139299] lock(&syncobj->lock);
[ 188.139312] local_irq_disable();
[ 188.139320] lock(&vc4->job_lock);
[ 188.139335] lock(&syncobj->lock);
[ 188.139350] <Interrupt>
[ 188.139358] lock(&vc4->job_lock);
[ 188.139372] *** DEADLOCK ***
Hand the fence over after job_lock is dropped. The job can complete and
drop exec->fence in that window, so take a reference first and publish
through the local pointer, as exec may already be gone. |