| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell PowerStore SDNAS contains a path traversal vulnerability that could allow an unauthenticated attacker to read, modify, or delete arbitrary files on the NAS node. |
| Argument injection in OpenVPN version 2.4.0 through 2.6.23 and 2.7_alpha1 through 2.7.8 on Windows allows local authenticated users to bypass interactive service option validation and add arbitrary configurationĀ options via a crafted command line. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: read mapping->a_ops->free_folio under i_lock
memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops
after the inode has been freed. Once the folio is deleted from the
pagecache it no longer pins the mapping, so after i_lock is dropped
e.g., a concurrent final iput() can evict and free the inode before
filemap_free_folio() looks up mapping->a_ops->free_folio.
Most callers hold a reference on the inode, but not all.
Documentation/filesystems/vfs.rst explicitly states that ->free_folio()
must not assume the original address_space mapping still exists.
Fix it by loading ->free_folio while i_lock is still held, similar to
what folio_unmap_invalidate() does.
Inline filemap_free_folio() into its remaining caller such that
delete_from_page_cache_batch() also just loads the callback before
dropping the i_lock.
The bug was found by code inspection and has not been reproduced.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: get rid of filemap_free_folio() entirely; improve patch description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/truncate: look again if a folio left the mapping
invalidate_inode_pages2_range() skips a folio which no longer belongs to
the mapping by the time it has got the folio lock, on the assumption
that somebody else has removed it from the page cache. But the folio may
have been replaced, and then there is a new folio with the same data at
that index.
For most cases, like folio migration, that is impossible. However,
collapse_file() only checks the refcount of the old folios, under the
i_pages lock, and relies on their folio locks from there on. That works for
users which repeat the lookup when they find folio->mapping changed.
The following scenario is, however, possible:
CPU0 pwrite(O_DIRECT) CPU1 collapse_file()
kiocb_invalidate_pages()
read the folio (old data), lock it
refcount check
the write completes copy to new_folio
kiocb_invalidate_post_direct_write()
find_get_entries() -> old folio
xas_store(new_folio)
folio->mapping = NULL
folio_unlock(folio)
folio_lock()
folio->mapping != mapping
-> continue
In that scenario, the collapsed folio with the data from before the write
stays in the page cache after the write has returned.
This used to be impossible, as khugepaged only collapsed files that nobody
had open for writing.
Restart the lookup at that index, like shmem_undo_range() does. The same
problem seems to exist in truncate_inode_pages_range() as well when
truncate_inode_folio() fails, so handle it there as well, but slightly
differently: simply check once more through find_get_entries(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: make shmem_file() check the file's inode
shmem_file() only checks if file->f_mapping is a shmem mapping. This
mapping can belong to another file, however, as with a Coda file backed
by a tmpfs container after mmap().
So it does not guarantee that the file inode is an actual shmem inode.
Seal handling and memfd preservation use this check before accessing
shmem inode state, so they can access an inode of the wrong type.
Let's make shmem_file() check the inode's file operations instead, to
identify shmem inodes reliably. This will identify regular shmem inodes,
including memfds and ordinary tmpfs files, independently of wrapper file
operations.
Use shmem_mapping() in collapse_file() instead to not change the behavior
of collapse_file(): it operates on the page cache and uses mapping->host
for shmem inode operations. Focusing on the file does not seem relevant. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix truncate hang in large swap entry
Truncating a tmpfs file or memfd to a page-aligned size inside a large
swap entry can loop indefinitely in shmem_undo_range(). The task holds
the inode lock and cannot be killed.
A large swap entry represents a whole swapped-out folio. For example,
truncate a file whose pages 0-7 share one swap entry to four pages:
[ 0 1 2 3 | 4 5 6 7 ]
keep | discard
^
new EOF, start = 4
i_size has already been updated when boundary handling asks
shmem_get_partial_folio() for page 4. Since it is swapped out, the helper
calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL
because its starting offset equals i_size. Nothing is read back.
The final scan cannot free the entry without losing pages 0-3. It skips
it, restarts from start = 4, and finds it again indefinitely. An unaligned
truncate avoids this particular failure because the requested page starts
below i_size. Folios already in the page-cache cannot trigger it as the
direct lookup will return them beyond EOF.
Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio()
directly for swap entries. This bypasses the read path's i_size check,
allowing the existing boundary handling to zero and split the folio. If
swap-in returns a smaller folio, it also splits the swap entry so the
final scan can free the entries beyond EOF. Retry the lookup if the entry
changes during swap-in.
Handling swap-in allocation failures remains broken and is unchanged by
this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM
instead of -EEXIST, shmem_get_partial_folio() returns NULL and
shmem_undo_range() skips boundary handling. If the large swap entry
remains intact, truncation can still loop in the final scan, while hole
punching can return without zeroing the boundary.
This may read an entire large folio back from swap while holding
i_rwsem, only to discard part of it. Avoiding that I/O would require
splitting both the swap entry and any large folio still in the swap
cache. That, however, is much bigger work. |
| In the Linux kernel, the following vulnerability has been resolved:
tmpfs: keep the quota soft limits of an unused id
When the last reference to a dquot goes away, shmem_release_dquot()
stores its limits in the rb tree of the mount, unless
shmem_is_empty_dquot() says that there is nothing worth storing. That
function looks at the usage and at the two hard limits only.
So if the administrator sets nothing but soft limits for an id that owns
no file yet, the entry is thrown away as soon as the dquot that
Q_SETQUOTA used is released, and the id never gets to see a limit.
To fix it, compare the soft limits as well: an entry can be empty only if
both soft limits are zero as well, which is exactly what
shmem_acquire_dquot() sets for a new entry.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: slightly adjusted description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: charge shared policy nodes
Any local user can bypass memory.max with mbind() on a tmpfs file, and
allocate unbounded kernel memory.
mbind() sets a NUMA memory policy for a range of a mapping. If the
mapping is of a shmem and friends, the kernel also stores the policy on
the inode, in a tree with one entry per range of the file.
Each mbind() on a single page of a mapping can add one shared policy node
(struct sp_node) and one struct mempolicy to that tree. They outlive the
mapping and stay around until the inode is destroyed. The tree is not
bounded by the file size, so the file can be empty.
Memory that user space can allocate must be charged to a memory cgroup. A
slab cache does that for all of its objects if it is created with
SLAB_ACCOUNT. numa_policy_init() creates the slab caches for both
structs without SLAB_ACCOUNT, so they are not charged to any cgroup.
Reproduced with mbind() on single pages of an empty tmpfs file, from a
cgroup with memory.max=8M: the global OOM killer killed tasks owned by
root, and the machine panicked.
Fix this by creating both caches with SLAB_ACCOUNT. This change implies
that mbind() can now fail when running into memcg limits. Further,
the policy_cache also serves task and VMA policies, so they are
similarly accounted now.
Note that per-file limits are not really helpful, as the user could
simply use many files; having limits per user is tricky as well.
Fix generated by an LLM and submitted by Chris Mason in private.
[ david: smaller description tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sysfs: restore NOFS context on early return in btrfs_sysfs_add_block_group_type()
btrfs_sysfs_add_block_group_type() sets up a NOFS context with
memalloc_nofs_save() because kobject_add() performs GFP_KERNEL
allocations deep in its call chain, and the function may be called
while holding a transaction handle or a lock required for a
transaction commit, where reclaim could deadlock.
Every other return path of this function calls memalloc_nofs_restore()
except the early return taken when another thread has already created
the kobject for the same raid index (this can happen when restriping).
Taking that path leaves PF_MEMALLOC_NOFS set on the calling task, so
all subsequent memory allocations performed by that task remain
restricted to the NOFS scope, which may lead to unexpected allocation
failures or deadlocks later on.
Restore the NOFS context before returning from that path. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: don't drop local events queued during TVLV update
batadv_tt_tvlv_container_update() read the number of local changes without
holding changes_list_lock. batadv_tt_local_event() is not serialized by
the commit_lock and can queue new events before the changes_list is
flushed:
CPU0 CPU1
batadv_tt_tvlv_container_update()
num = ...local_changes;
batadv_tt_local_event()
list_add_tail(...);
...local_changes++;
spin_lock_bh(&...changes_list_lock);
/* only num events copied but all freed */
The additional events were freed without ever being sent. Other nodes will
only notice this via a CRC mismatch and must request the full table.
The number of changes and the changes_list must therefore be taken
atomically. Events queued afterwards then stay in the tt.changes_list for
the next TT round.
The changes can no longer be kept for the next round when the TVLV buffer
allocation fails. But they would be sent with a skipped TTVN anyway, so the
other nodes have to request the full table in this case either way. The
last changeset is only dropped in this case when the TTVN was incremented.
Without new changes, it still describes the current TTVN.
Previously, the unconsumed changes caused a retry of the TVLV container
update in the next commit round. Since the changes are now consumed, the
next round would only take the path without changes and wait for
BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until
then, the outdated container with the previous TTVN would still be
announced. The ogm_append_cnt is therefore reset on failure to retry the
update in the next OGM interval.
This doesn't make the CRC consistent with the announced changeset. The
local table modifications are still not serialized with the commit and
batadv_tt_local_transition_new() can still make a client part of the CRC
for which the event is only part of the next TT round. Such an
inconsistency is detected by the CRC check of the other nodes and solved
via a full table request. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: ignore ROAM flag of received ADD changes
A received TT change (OGM diff or full table response) with the ROAM flag
but without DEL is handled by batadv_tt_global_add() like a ROAMING_ADV:
* a newly created global entry gets BATADV_TT_CLIENT_ROAM and is
therefore excluded from the global CRC. The sender has it in its local
CRC and the receiver has to request the full table again
* batadv_tt_global_purge_local() removes the local entry of the
receiver. The receiver's own client is considered as roamed to the sender
and frames for it are rerouted
The ROAM flag only has a meaning together with DEL. Drop it on reception to
keep it from populating the global table with a temporary ROAMING entry
which is not part of the CRC - and therefore causing a CRC mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: validate tracker padding before forwarding
A multicast tracker with an even number of destinations needs two
padding bytes after its destination list. batadv_mcast_forw_packet()
currently only checks that the count field and the addresses fit in
the tracker TVLV.
If an unpadded even tracker is compacted to an odd number of
destinations, batadv_mcast_forw_shrink_update_headers() includes those
missing padding bytes in the amount to remove. The subsequent memmove
can then write two bytes past the old packet tail. With no tailroom,
this corrupts skb_shared_info.
Include the required padding in the existing tracker length check.
This rejects the malformed tracker before either received or locally
generated packets can reach the compactor. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: don't decrement a server-owned zero nlink
A 9P2000.L server can report nlink=0 for a regular file that still
exists. On a cache=loose or cache=fscache mount, lookup stores that
value with set_nlink(). A later successful unlink calls
v9fs_dec_count(), which still calls drop_nlink() for a non-directory.
drop_nlink() warns, and the unsigned link count wraps to 4294967295.
fstat() on a descriptor opened before the unlink shows 0 before and
4294967295 after.
The warning on the unpatched kernel, trimmed:
WARNING: fs/inode.c:408 at drop_nlink+0xac/0xd0, CPU#1: trigger/188
CPU: 1 UID: 0 PID: 188 Comm: trigger Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy)
RIP: 0010:drop_nlink+0xac/0xd0
Call Trace:
<TASK>
v9fs_remove+0x529/0x750
vfs_unlink+0x2f0/0xbd0
filename_unlinkat+0x340/0x6c0
__x64_sys_unlink+0x46/0x70
do_syscall_64+0xe8/0x4f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
Directories whose cached nlink is at most 2 already skip this
decrement, because the exported filesystem may not maintain nlink
(commit ac89b2ef9b559). cache=none skips it as well (commit
574aa0b479947). cache=mmap does not take this path: it sets neither
CACHE_META nor CACHE_LOOSE. A regular file on cache=loose or
cache=fscache still does. Its count came from GETATTR and may
already be zero, so skip the decrement when i_nlink is already 0.
Verified on 7.3-rc4-00537-ga3ff15db6820 with only this change. A
server that advertises nlink=0 and accepts the unlink no longer
warns, and the open descriptor stays at nlink 0. An honest server
on the same mount still goes from 1 to 0. A rejected unlink leaves
the count unchanged. cache=none is unchanged. With panic_on_warn
the unpatched kernel panics on the warning; the patched kernel does
not. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: validate the response size from the backend
p9_xen_response() takes the length of an incoming response from the ring
-- the first field of the 9p header, which the Xen transport reuses as
its framing header -- and uses it to advance the consumer index, but
never checks that it is at least the header size or no larger than the
number of bytes the backend has actually produced.
A malicious or buggy backend can post a response whose size is smaller
than the header (for example 0). The consumer index then never advances,
so the response work re-reads the same ring contents instead of making
progress. In testing this raced with the teardown that the malformed
reply triggers and dereferenced a freed p9_client:
9pfs 9pfs-0: Wrong req tag=ffff
BUG: kernel NULL pointer dereference, address: 0000000000000060
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: events p9_xen_response
RIP: 0010:idr_find+0x4/0x10
RSP: 0018:ffffbf5d80063de8 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa229c21195a0 RCX: ffffa229c2400000
RDX: ffffa229c11c2200 RSI: 000000000000ffff RDI: 0000000000000050
RBP: 000000000000ffff R08: 3fffffffffffdfff R09: ffffffffffffffff
R10: 3fffffffffffdfff R11: ffffffff87a60e80 R12: 0000000000000050
R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000100000
FS: 0000000000000000(0000) GS:ffffa22a7661c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 000000003ac34002 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
p9_tag_lookup+0x2b/0x90
p9_xen_response+0x17c/0x2e0
process_one_work+0x16a/0x3a0
worker_thread+0x172/0x2e0
kthread+0xdd/0x110
ret_from_fork+0x18b/0x240
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
CR2: 0000000000000060
---[ end trace 0000000000000000 ]---
Reject a response whose size is outside [sizeof(header), queued] before
using it, matching the validation the backend already applies to
incoming requests. |
| Missing authorization in Editing in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Out of bounds read in Media in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Low) |
| A weakness has been identified in SqueezeAILab SqueezeLLM up to a5fd71f353bf569feb7b55737c1c1493e78e8f31. This vulnerability affects the function vecquant4matmul_spmv_hybrid_nuq_perchannel of the file quant_cuda_kernel.cu of the component CUDA Matvec Kernel. Executing a manipulation of the argument full_row_indices can lead to out-of-bounds write. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| Dell PowerStore SDNAS contains an out-of-bounds memory vulnerability in the NAS NFS service that an unauthenticated remote attacker could exploit to cause a denial of service. |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in the agent info popup was possible |
| In JetBrains TeamCity before 2026.2 the REST API exposed details of users not visible in the UI |