| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| PHP-CGI out-of-bounds read and write during PATH_INFO correction.
The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
media: gspca: use vb2_video_unregister_device() on disconnect
gspca uses vb2_fop_release(), but gspca_disconnect() only unregisters
the video device. If the queue owner closes the device after USB
disconnect, vb2_fop_release() releases the queue and invokes
gspca_stop_streaming() at that point.
gspca_stream_off() calls subdriver stop callbacks and
usb_set_interface() through gspca_dev->dev. By the time the late close
runs, the USB core can have freed the usb_device, resulting in a
use-after-free. This was observed as a KASAN use-after-free in sd_stopN().
Use vb2_video_unregister_device() so the queue is released and streaming
is stopped synchronously during disconnect, while the usb_device is still
valid. Since the helper takes the queue lock, which is usb_lock, call it
after dropping that lock. |
| PHAR OpenSSL signature bypass via algorithm downgrade.
The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: unregister DVB bus when SP2 CI setup fails
The DVBSKY S950C, DVBSKY T980C and TechnoTrend CT2-4500 CI paths register
the DVB bus before attaching their SP2 CI client. If that client cannot be
created, bound, or pinned, the current error path removes the I2C frontend
components and only deallocates the frontend list, leaving the registered
DVB adapter behind. Removing an I2C demod before unregistering the DVB bus
can also expose the use-after-free ordering fixed for the normal remove
path.
Unregister the DVB bus immediately when SP2 CI setup fails, before the
existing I2C client cleanup. The bus helper empties the frontend list, so
the later frontend deallocation has nothing left to release. Keep failures
from vb2_dvb_register_bus() on the existing cleanup path. Also release an
unbound SP2 client and propagate the actual I2C creation or CI registration
error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hiddev: keep state alive through disconnect unlock
mutex_unlock() clears the mutex owner before taking its wait lock. A
thread spinning in the final hiddev file release can acquire
existancelock after hiddev_disconnect() clears the owner, then free
hiddev before the disconnecting thread reaches the mutex wait lock. This
causes a use-after-free in the mutex slow unlock path.
Give the connection and each open file an explicit reference. Drop each
reference only after its existancelock critical section has completed,
so neither unlock path can free the mutex while the other is still using
it. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq: Defer kfree(irqaction) until irq_thread_dtor() finishes
When an interrupt thread exits abnormally via do_exit() (e.g. the interrupt
handler oopses) without returning from irq_thread(), a concurrent call to
free_irq() could free the irqaction before the irq_thread_dtor() exit task
work runs.
irq thread (oopsed) free_irq()
------------------- ----------
do_exit()
exit_mm()
complete_vfork_done() -------> kthread_stop() returns
exit_files() ... kfree(action)
exit_task_work()
irq_thread_dtor()
action->... <- use-after-free
Track the pending exit work with the IRQTF_EXIT_WORK thread flag, and have
__free_irq() wait for the bit to clear before kfree().
irq_thread_dtor() only runs on irq_thread abnormal exit. If that dtor also
faults, free_irq() will hang indefinitely, but double IRQ thread faults
require a reboot anyways.
[ tglx: Add missing include ] |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Set S_VERITY only after rollback is no longer possible
Commit f77f281b6118 ("fsverity: use a hashtable to find the
fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to
make concurrent reads start going through fsverity verification slightly
earlier than they did before.
Instead of it happening when enable_verity() calls fsverity_set_info(),
it now happens when ->end_enable_verity() sets S_VERITY.
However, ext4 and btrfs can roll back verity after they set S_VERITY,
causing a use-after-free.
Fix that by making ext4 and btrfs set S_VERITY only after rollback is no
longer possible. On failure, don't roll back S_VERITY, but do roll back
the filesystem-specific verity flag.
Also update enable_verity() to handle any future instances of this bug
more safely by warning and *not* freeing the fsverity_info.
Finally, tweak some comments. Clarify one, and move information from
another to its proper place in the comment for ->end_enable_verity(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: pin mm_users in do_pagemap_scan()
The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from
/proc/<pid>/pagemap without holding a reference to mm_users.
proc_mem_open() deliberately grabs only mm_count, so a consumer that
touches the address space has to call mmget_not_zero() first. Every other
consumer in this file does -- m_start(), do_procmap_query(),
show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not.
Without that reference the target can reach exit_mmap() concurrently, and
exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading,
which does not exclude the scanner. For ordinary VMAs this is harmless,
as free_pgtables() and remove_vma() run afterwards under mmap_write_lock.
A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's
hugetlb_vma_lock inside the read-locked phase.
walk_hugetlb_range() can therefore load vma->vm_private_data, have the
lock freed underneath it, and then down_read() a freed rw_semaphore. The
load happens before the freeing side clears the pointer, so this is a
use-after-free and not a NULL dereference. Any unprivileged user can
reach it with no huge pages configured, as hugetlb_reserve_pages()
allocates the lock before the VM_NORESERVE early return.
Pin mm_users across the scan, the way the other consumers do. mmput()
from the exiting task can then no longer reach exit_mmap() while a walk is
in progress.
[akpm@linux-foundation.org: remove unneeded & undesirable test for !mm] |
| Mixed-case HTTPS and FTPS URLs can expose data in plaintext.
The HTTP and FTP stream wrappers recognise URL schemes case-insensitively, but enable TLS only when the scheme contains a lowercase "s" at a fixed position. A URL such as HTTPS:// or FTPS:// passed to file_get_contents(), fopen() or other stream functions, or received as an HTTP redirect target, is therefore handled over unencrypted HTTP or FTP. An attacker able to observe the network traffic can read data the application expected TLS to protect, including credentials, request bodies and transferred files.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: atmel_lcdfb: Prevent FIFO work after removal
The LCD controller IRQ schedules sinfo->task to recover from a FIFO
underflow. Probe currently requests the IRQ before initializing the
work, so an early interrupt can schedule an uninitialized work item.
The probe error path and remove path cancel the work before freeing the
IRQ. A FIFO-underflow interrupt can schedule the work again after that
cancellation. framebuffer_release() may then free sinfo while the work
is still pending.
KASAN reported a use-after-free in atmel_lcdfb_task() when an underflow
interrupt occurred during removal. With the IRQ freed before the work
was cancelled, the same test completed without a kernel diagnostic.
Initialize the work before requesting the IRQ. In both cleanup paths,
free the IRQ before cancelling the work so that it cannot be scheduled
again after cancellation. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase
panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls
xa_erase() without holding the xarray lock across both. If the handle is
destroyed by another thread in between, and a concurrent GROUP_CREATE
reuses the freed ID, the first destroy erases and releases the new,
still-initializing group, leading to a use-after-free in
panthor_group_create().
Do the mark check and erase atomically under xa_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_vhci: Pin module for debugfs file operations
An open debugfs file retains its file_operations pointer in the
debugfs proxy state. However, force_suspend_fops, force_wakeup_fops,
aosp_capable_fops, and force_devcoredump_fops have no .owner set to
THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get()
which succeeds without taking a reference to the hci_vhci module.
When userspace opens any of these debugfs files and later closes
the /dev/vhci file descriptor (triggering vhci_release() and
debugfs file removal), the open debugfs file descriptor remains valid
in userspace. Because the module refcount was not incremented,
the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci).
When the userspace process subsequently closes the debugfs file
descriptor, full_proxy_release() accesses the already unmapped
file_operations structure, resulting in a kernel page fault / oops:
BUG: unable to handle page fault for address: fffffbfff846f18b
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:full_proxy_release+0x8e/0x140
Call Trace:
<TASK>
__fput+0x39f/0xa60
fput_close_sync+0xff/0x200
__x64_sys_close+0x8c/0xf0
do_syscall_64+0xc3/0x590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Modules linked in: ... [last unloaded: hci_vhci(E)]
The issue was discovered via manual code audit of
drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM
with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller
teardown and module unload.
Set .owner = THIS_MODULE on all four file_operations structures so that
debugfs pins the module until all file descriptors are closed. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: ps: fix snd_acp63_remove() teardown ordering
The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM
child platform devices, but snd_acp63_remove() unregisters them while
the interrupt is still held by devres, which frees it only after remove
returns. An interrupt in this window is a use-after-free.
Mask the ACP interrupt sources and call devm_free_irq() before the
first child device is unregistered. The masking goes through the new
acp_hw_ops->disable_interrupts callback, keeping the remove path
platform-agnostic. The interrupt line is shared, and acp_hw_deinit()
clears the sources only after the children are gone, which would
leave the line raised with no handler left to ack it. The window
predates the tagged refactor, which only reshaped the dereferences.
devm_free_irq() waits for in-flight handlers, but not for work the
hardirq has already queued: acp63_irq_handler() schedules
amd_sdw_irq_thread on the SoundWire manager. Draining that work in
the manager's remove path is a soundwire-side change and follows
separately.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcmtest: handle multiple wraps in random capture fill
The random capture helpers assume that the data generated for one timer
tick wraps the DMA ring at most once. However, b_rw describes 200 ms of
audio because the timer runs at 5 Hz, so it can be several times larger
than a small ring.
For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA
ring is 4096 bytes while one tick generates 76800 bytes. After filling the
4096-byte tail, the existing code issues a second 72704-byte write from the
ring base, writing 68608 bytes beyond the ring. Both interleaved and
non-interleaved capture are affected.
KASAN reports the first write into the adjacent free page as a
use-after-free in the random-byte generator. The underlying defect is an
out-of-bounds write from the live DMA ring, not a stale DMA allocation.
Split each random write repeatedly at the interleaved ring or per-channel
block boundary. Keep the hardware-pointer update exactly once after the
complete logical write.
The issue reproduced on three of three clean boots. With this change, the
same vulnerable geometry completed six times without a sanitizer finding.
Boundary, pattern-fill, no-timer, open/close, and module-reload controls
also completed normally.
snd-pcmtest is a test driver, and selecting random fill requires an
administrator-controlled module parameter. The written values come from the
kernel random generator; no privilege escalation or attacker-controlled
write primitive was demonstrated. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: configfs: fix data offset calculation for subsystem callbacks
`get_group_data()` chooses between `Group::<Parent>::container_of()` and
`Subsystem::<Parent>::container_of()` based on whether `this` represents
the root group of a configfs subsystem. It detects this by checking
`(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c`
unconditionally sets `cg_subsys` for every `config_group` attached anywhere
in a registered subsystem, including the subsystem's own `su_group`. The
only `config_group` with a NULL `cg_subsys` is the configfs root, on which
userspace cannot trigger callbacks. The check is therefore always false at
runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks
reach the `Group` branch and may read `data` at the wrong offset.
Thus change the `is_root` check to correctly identify whether a group is a
root group by comparing `this` to `subsys.su_group`.
[ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ] |
| In the Linux kernel, the following vulnerability has been resolved:
rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML
On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third
argument is a taint number, but `warn_on!` passes its bug flags there.
As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The
warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after
`warn_on!` fires, where it should be 512. It also causes an
out-of-bounds write in `add_taint()`.
Pass `TAINT_WARN` directly, as C does on UML. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: don't lose a folio lock wakeup to a signal
An exclusive waiter in folio_wait_bit_common() can leave the wait loop
because of a fatal signal, then be woken by folio_unlock() before
finish_wait(). If the waker did not hand over the lock, the waiter returns
-EINTR without trying to acquire it.
folio_wake_bit() stops after waking the first exclusive waiter, so this
loses the wakeup and can leave other waiters asleep indefinitely on an
unlocked folio.
After finish_wait(), let a waiter woken without a lock handoff try once
more to acquire the lock. If successful, return success so the caller's
eventual unlock wakes the next waiter. Otherwise, the current lock owner
will do so.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: clarify and simplify comment + description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix truncate loop after boundary swapin failure
If swapping in a large entry at the new EOF fails, shmem_undo_range()
leaves the entry in place. Its final scan skips the entry, then restarts
from the same start index and finds it again. Truncation can loop forever
while holding i_rwsem.
Advance start past the skipped entry so that a restarted scan can finish,
as we already do for folios that cannot be split.
Note that this does not fix the missing zeroing when boundary swapin fails,
it merely prevents the endless loop. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: preserve allocation errors when swapping in large entries
shmem_swapin_folio() adjusts swap to the requested slot within a large
swap entry before allocating a folio. If allocation or charging fails,
the error path compares this adjusted value with the original entry
still stored in the XArray in shmem_confirm_swap().
Unless the index is at the start of the entry, this turns -ENOMEM into
-EEXIST even though nothing changed.
The caller retries -EEXIST, so persistent allocation failures can leave
the task spinning instead of returning the error.
Restore swap to index_entry on allocation failure so the existing error
path checks the original entry. This preserves the allocation error if
the entry is unchanged and still retries if it changed concurrently. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: stop retrying folios that cannot be split
A fault or collapse can insert a large folio crossing EOF after
shmem_undo_range() has handled the boundary folios. If splitting that
folio fails, truncate_inode_partial_folio() retains it when it is dirty.
The final scan then repeatedly finds it because it restarts from an
unchanged start.
Truncation keeps the inode lock and ignores fatal signals while looping.
A concurrent unlink() can then block other directory operations while
holding the directory lock and waiting for the file's lock.
Advance start past the retained folio, whose truncated part has already
been zeroed. Do not move start backwards if the failed split has shrunk
the folio.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: split fixes, simplify descriptions, adjust comments ] |