Search Results (26437 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-64526 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ethtool: tsconfig: fix missing ethnl_ops_complete() tsconfig_prepare_data() calls ethnl_ops_begin(), we need to call ethnl_ops_complete() before returning the error.
CVE-2026-64527 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback().
CVE-2026-64528 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung: Remove redundant port lock acquisition in rx helpers Sashiko identified a deadlock when the console flow is engaged [1]. When console flow control is enabled (UPF_CONS_FLOW), s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable(). The serial core framework invokes the .stop_tx() and .start_tx() callbacks with the port->lock spinlock already held. Furthermore, all internal driver paths that invoke stop_tx (such as the DMA TX completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the serial core). However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable() unconditionally attempt to acquire port->lock again using uart_port_lock_irqsave(). Since spinlocks are not recursive, this causes a deadlock on the same CPU when console flow control is engaged. Remove the redundant lock acquisition from both rx helper functions.
CVE-2026-64537 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: reject invalid CCM interval at configuration time ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc).
CVE-2026-64550 1 Linux 1 Linux Kernel 2026-11-17 7.3 High
In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: validate MAP frame length before ingress parsing When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes the skb straight to __rmnet_map_ingress_handler(), skipping the length validation that rmnet_map_deaggregate() performs on the aggregated path. The parser then dereferences the MAP header and csum header/trailer based on the on-wire pkt_len without checking skb->len, so a short frame is read out of bounds: BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet Read of size 1 at addr ffff88801118ed00 by task exploit/147 Call Trace: ... rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413) __rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96) rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6089) netif_receive_skb (net/core/dev.c:6460) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2001) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:94) ... Factor that validation out of rmnet_map_deaggregate() into rmnet_map_validate_packet_len() and run it on the no-aggregation path too. The MAP header is bounds-checked first, since this path can receive a frame shorter than the header.
CVE-2026-64549 1 Linux 1 Linux Kernel 2026-11-17 7.1 High
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup() bpa10x_setup() sends the vendor command 0xfc0e and passes the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length: bt_dev_info(hdev, "%s", (char *)(skb->data + 1)); hci_set_fw_info(hdev, "%s", skb->data + 1); A device that returns a one-byte response (status only) leaves skb->data + 1 past the end of the data, and the %s walk reads adjacent slab memory until it meets a NUL. The same happens when the payload is not NUL-terminated within skb->len. The out-of-bounds bytes end up in the kernel log and the firmware-info debugfs file. Print the revision string with a bounded "%.*s" limited to skb->len - 1 instead. This keeps the string readable for well-behaved devices while never reading past the received data, and does not fail setup, so a device returning a short or unterminated response keeps working.
CVE-2026-64555 1 Linux 1 Linux Kernel 2026-11-17 8.8 High
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops() kvm_hyp_handle_mops() resets the single-step state machine as part of rewinding state for a MOPS exception by modifying vcpu_cpsr() and writing the result directly into hardware. In the case of nested virtualization, vcpu_cpsr() is a synthetic value such that the rest of KVM can deal with vEL2 cleanly. That means the value requires translation before being written into hardware, which is unfortunately missing from the MOPS handler. Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state altogether, which will be resynchronized on the next 'full' exit back to KVM.
CVE-2022-4994 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: wean fast IN from emulator_pio_in Use __emulator_pio_in() directly for fast PIO instead of bouncing through emulator_pio_in() now that __emulator_pio_in() fills "val" when handling in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a pure nop. emulator_pio_in_emulated is now the last caller of emulator_pio_in. No functional change intended.
CVE-2026-64565 1 Linux 1 Linux Kernel 2026-11-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data() The `ims_pcu_process_data()` processes incoming URB data byte by byte. However, it fails to check if the `read_pos` index exceeds IMS_PCU_BUF_SIZE. If a malicious USB device sends a packet larger than IMS_PCU_BUF_SIZE, `read_pos` will increment indefinitely. Moreover, since `read_pos` is located immediately after `read_buf`, the attacker can overwrite `read_pos` itself to arbitrarily control the index. This manipulated `read_pos` is subsequently used in `ims_pcu_handle_response()` to copy data into `cmd_buf`, leading to a heap buffer overflow. Specifically, an attacker can overwrite the `cmd_done.wait.head` located at offset 136 relative to `cmd_buf` in the `ims_pcu_handle_response()`. Consequently, when the driver calls `complete(&pcu->cmd_done)`, it triggers a control flow hijack by using the manipulated pointer. Fix this by adding a bounds check for `read_pos` before writing to `read_buf`. If the packet is too long, discard it, log a warning, and reset the parser state. [dtor: factor out resetting packet state, reset checksum as well]
CVE-2026-64566 1 Linux 1 Linux Kernel 2026-11-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: xfrm: iptfs: propagate SKBFL_SHARED_FRAG in iptfs_skb_add_frags() When iptfs_skb_add_frags() copies frag references from the source frag walk into a new SKB, it increments the page reference count via __skb_frag_ref() but does not propagate SKBFL_SHARED_FRAG to the destination SKB's skb_shinfo->flags. If the source SKB carries shared frags (e.g. from a page-pool backed receive path), the new inner SKB will appear to ESP as having privately owned frags. A subsequent esp_input() call for a nested transport-mode SA then takes the no-COW fast path and decrypts in place, writing over pages that are still referenced by the outer IPTFS SKB. This causes kernel-visible memory corruption and can trigger a panic. All other frag-transfer helpers in the kernel (skb_try_coalesce, skb_gro_receive, __pskb_copy_fclone, skb_shift, skb_segment) correctly propagate SKBFL_SHARED_FRAG; align iptfs_skb_add_frags() with this convention by setting the flag inside the loop immediately after __skb_frag_ref() and nr_frags++, so every exit path that attaches a frag unconditionally propagates SKBFL_SHARED_FRAG.
CVE-2026-64568 1 Linux 1 Linux Kernel 2026-11-17 7.8 High
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix unsol_bcast_probe_resp double free on alloc failure ieee80211_set_unsol_bcast_probe_resp() calls kfree_rcu() on the old template before allocating the replacement. If the kzalloc() then fails, it returns -ENOMEM while link->u.ap.unsol_bcast_probe_resp still points at the object already queued for freeing. A later update or AP teardown re-queues that same rcu_head; the second free is caught by KASAN when the RCU sheaf is processed in softirq: BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850) Free of addr ffff88800d06f300 by task exploit/145 ... __rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940) rcu_free_sheaf (mm/slub.c:5850) rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) The buggy address belongs to the cache kmalloc-128 of size 128 Queue the old object for kfree_rcu() only after the new one is published, matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon().
CVE-2026-64569 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does.
CVE-2026-64571 1 Linux 1 Linux Kernel 2026-11-17 7.1 High
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate RX frame length in p54_rx_eeprom_readback() p54_rx_eeprom_readback() copies the requested EEPROM slice out of a device-supplied readback frame without checking that the skb actually holds that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()") closed the destination overflow by copying a fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len), but the source side is still unbounded: nothing verifies the frame is long enough to supply that many bytes. A malicious USB device can send a short frame whose advertised len matches priv->eeprom_slice_size while the payload is truncated. The equality check passes and memcpy() reads past the end of the skb, leaking adjacent heap: BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) Read of size 1016 at addr ffff88800f077114 by task swapper/0/0 Call Trace: <IRQ> ... __asan_memcpy (mm/kasan/shadow.c:105) p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507) p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005) ... </IRQ> The buggy address belongs to the object at ffff88800f0770c0 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 84 bytes inside of allocated 704-byte region [ffff88800f0770c0, ffff88800f077380) Check that the slice fits in the skb before copying.
CVE-2026-99308 1 Linux 2 Linux, Linux Kernel 2026-11-17 6.8 Medium
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix bounce buffer overflow High-speed devices with out of spec 1024 byte bulk endpoints exist and are allowed by USB core, but xhci-hcd always sets packet size to 512. The exact nature of these devices isn't documented, commit fb5ee84ea72c ("USB: Accept bulk endpoints with 1024-byte maxpacket") only states that they "don't work with xHCI host controllers", whatever it means. But somebody (or a malicious device) can try, and then the driver will allocate a 512 byte bounce buffer for this endpoint and may write up to 1024 bytes into it if particular scatter-gather URBs are used, because xhci_align_td() obtains packet size from the descriptor. Fix this. As a side effect, TRBs will be aligned to the packet size chosen by the driver on all endpoints of all speeds. Alignment serves the xHC, not device, so this is fine. Only out of spec devices are affected anyway.
CVE-2026-99275 1 Linux 2 Linux, Linux Kernel 2026-11-17 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short SESSION_SETUP responses smb2_check_message() accepts frames shorter than struct smb2_pdu when the SMB2 status is non-zero, before the minimum-PDU check added by b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP response is therefore accepted even though it cannot contain the SecurityBufferOffset and SecurityBufferLength fields. The parser then reads those fields from stale bytes left in the reused receive buffer by an earlier frame. With a long stale SecurityBufferLength, decode_ntlmssp_challenge() copies up to about 64 KB from beyond the receive object and sends the data back to the server in the NTLMv2 AUTHENTICATE target info. Reject short MPR SESSION_SETUP responses before the short-error path, and validate SecurityBufferOffset + SecurityBufferLength against the received response length before decoding the challenge. The ordering bypass is not new: the short-error early return predates b4694f269e66d, and the unvalidated SecurityBufferLength read predates the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable trees are affected. Reproduced on 6.6.87.2; the path is unchanged on mainline.
CVE-2026-99272 1 Linux 2 Linux, Linux Kernel 2026-11-17 7.1 High
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the data area in SMB2_read() SMB2_read() copies le32_to_cpu(rsp->DataLength) bytes from (char *)rsp + rsp->DataOffset without checking that the range lies within the response actually received. A READ response with DataOffset == 0 makes smb2_get_data_area_len() zero the data length, so smb2_check_message() accepts a frame as short as the fixed response, while SMB2_read() still uses the server-supplied DataLength, capped only by CIFS_MAX_MSGSIZE and the caller's length. A malicious server can answer the synchronous read used by the mfsymlinks (or SFU) symlink parser with an 81-byte READ response carrying DataOffset 0 and DataLength 1067, making the client copy 1067 bytes from a 448-byte receive object (KASAN slab-out-of-bounds; up to 16 KiB in the general case). Clamp a zero (or header-overlapping) DataOffset to read_rsp_size, as handle_read_data() does for the asynchronous path, and reject the response unless DataOffset + DataLength fits within rsp_iov.iov_len. The SMB1 helper was fixed the same way in 5be5bdda5863.
CVE-2026-89788 1 Linux 1 Linux Kernel 2026-11-17 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix tree connection use-after-free in smb2_tree_connect() ksmbd_tree_conn_connect() publishes a new tree connection in sess->tree_conns with a single reference and returns its pointer to smb2_tree_connect(). The handler continues to initialize the object and build the response after publication. A concurrent session logoff can erase the connection and drop that reference, freeing the object while the handler still uses it. BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90 smb2_tree_connect (fs/smb/server/smb2pdu.c:2872) handle_ksmbd_work process_one_work worker_thread kthread After xa_store() succeeds, take a second reference before releasing tree_conns_lock. The original reference belongs to the xarray entry and the second belongs to the creating smb2_tree_connect() handler. Keep the references balanced in every path: - On normal exit or an error after publication, smb2_tree_connect() drops its creator reference. Error cleanup also calls ksmbd_tree_conn_disconnect(), which drops the xarray reference only if it removes the exact entry. - SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop its xarray reference. The request's existing lookup reference remains owned by the request and is released by the existing cleanup. - Session LOGOFF removes each entry and drops its xarray reference. If it wins the race, later cleanup sees that the entry is gone and does not drop that reference again. To enforce this ownership, claim the disconnected state and erase the exact entry atomically under tree_conns_lock. This guarantees one drop for the xarray reference and one drop by each in-flight user, regardless of which teardown path wins. If logoff removes the entry before initialization completes, fail the connect instead of marking the detached object TREE_CONNECTED.
CVE-2026-89692 1 Linux 1 Linux Kernel 2026-11-17 7.5 High
In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit at entry to serialize recall work, then calls nfsd4_run_cb() to queue the recall. When the queue attempt fails the refcount bump is undone, but the RUNNING bit is left set. The only site that clears the bit is nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the workqueue and is therefore unreachable when nothing was queued. The bit becomes a permanent latch on dp->dl_recall.cb_flags: every subsequent break_lease() on the same delegation hits the early-return guard in nfsd_break_one_deleg() and silently skips the recall, so the delegation is never broken and the conflicting open or lock stalls. Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside the refcount_dec.
CVE-2025-38050 1 Linux 1 Linux Kernel 2026-11-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios A kernel crash was observed when replacing free hugetlb folios: BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary) RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0 RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000 RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000 RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000 R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000 R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004 FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0 Call Trace: <TASK> replace_free_hugepage_folios+0xb6/0x100 alloc_contig_range_noprof+0x18a/0x590 ? srso_return_thunk+0x5/0x5f ? down_read+0x12/0xa0 ? srso_return_thunk+0x5/0x5f cma_range_alloc.constprop.0+0x131/0x290 __cma_alloc+0xcf/0x2c0 cma_alloc_write+0x43/0xb0 simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110 debugfs_attr_write+0x46/0x70 full_proxy_write+0x62/0xa0 vfs_write+0xf8/0x420 ? srso_return_thunk+0x5/0x5f ? filp_flush+0x86/0xa0 ? srso_return_thunk+0x5/0x5f ? filp_close+0x1f/0x30 ? srso_return_thunk+0x5/0x5f ? do_dup2+0xaf/0x160 ? srso_return_thunk+0x5/0x5f ksys_write+0x65/0xe0 do_syscall_64+0x64/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e There is a potential race between __update_and_free_hugetlb_folio() and replace_free_hugepage_folios(): CPU1 CPU2 __update_and_free_hugetlb_folio replace_free_hugepage_folios folio_test_hugetlb(folio) -- It's still hugetlb folio. __folio_clear_hugetlb(folio) hugetlb_free_folio(folio) h = folio_hstate(folio) -- Here, h is NULL pointer When the above race condition occurs, folio_hstate(folio) returns NULL, and subsequent access to this NULL pointer will cause the system to crash. To resolve this issue, execute folio_hstate(folio) under the protection of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not return NULL.
CVE-2026-64534 1 Linux 1 Linux Kernel 2026-11-16 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request().