| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1119: fix PM reference leak in buffer preenable
ads1119_triggered_buffer_preenable() resumes the device with
pm_runtime_resume_and_get() before starting a conversion.
If i2c_smbus_write_byte() fails, the function returns the error directly
and leaves the runtime PM usage counter elevated. The matching
postdisable callback is not called when preenable fails, so the reference
is leaked and the device may remain runtime-active indefinitely.
Store the I2C transfer result in ret and drop the runtime PM reference on
failure before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: hw-consumer: free scan_mask on buffer release
The scan_mask lifetime changed in commit 9a2e1233d38c ("iio: buffer:
hw-consumer: remove redundant scan_mask flexible array").
Before that change, the scan mask storage was embedded in struct
hw_consumer_buffer, so iio_hw_buf_release() could free the whole
allocation with a single kfree(hw_buf).
That commit moved the scan mask to a separate bitmap_zalloc() allocation
stored in buffer.scan_mask, but left iio_hw_buf_release() unchanged.
Free the scan mask in iio_hw_buf_release() before freeing the buffer
wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: scd30: Cleanup initializations and fix sign-extension bug
Include linux/bitfield.h for FIELD_GET().
Create new macros for bit manipulation in combination with manual bit
manipulation being replaced with FIELD_GET().
The current variable declaration and initializations are barely readable
and use comma separations across multiple lines. Refactor the
initializations so that mantissa and exp have separate declarations and
sign gets initialized later.
In addition (and due to the nature of the cleanup), fix a sign-extension
bug where, float32 would get bitwise anded with ~BIT(31)
(which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: bmg160: bail out when bandwidth/filter is not in table
bmg160_get_filter() walks bmg160_samp_freq_table[] looking for the entry
matching the bw_bits value read from the chip:
for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
break;
}
*val = bmg160_samp_freq_table[i].filter;
If no entry matches, i ends up equal to the array size and the next line
reads one slot past the end. bmg160_set_filter() has the same shape, driven
by 'val' instead of bw_bits.
smatch flags both:
drivers/iio/gyro/bmg160_core.c:204 bmg160_get_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
drivers/iio/gyro/bmg160_core.c:222 bmg160_set_filter() error:
buffer overflow 'bmg160_samp_freq_table' 7 <= 7
Return -EINVAL when no entry matches.
The set_filter() path is reachable from userspace via the sysfs
in_anglvel_filter_low_pass_3db_frequency interface, so userspace can
trivially trigger the out-of-bounds read with a value that is not in
bmg160_samp_freq_table[].filter. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: pressure: mpl115: fix runtime PM leak on read error
mpl115_read_raw() takes a runtime PM reference with pm_runtime_get_sync()
before reading the processed pressure or raw temperature, but on the read
error path it returns without calling pm_runtime_put_autosuspend(). Each
failed read therefore leaks a runtime PM reference and prevents the device
from autosuspending.
Drop the reference before checking the return value so both the success
and error paths are balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp->cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks()
rds_tcp_reset_callbacks() quiesces the transmit path by setting the
path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to
be sampled clear before swapping the underlying socket and calling
rds_send_path_reset().
Sampling the bit clear is not the same as owning it: rds_send_xmit()
can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its
state recheck after taking the lock is a store-buffering pattern (the
resetter writes the state and reads the bit, the sender writes the
bit and reads the state) and acquire_in_xmit() is only an acquire
operation, so on weakly ordered architectures both sides can miss
each other's write and the transmit path then runs concurrently with
rds_send_path_reset() rewriting cp_xmit_* state - which is exactly
what the comment above rds_send_path_reset() tells its callers to
prevent.
Take the lock instead, hold it across the socket swap and
rds_send_path_reset(), and release it with a wake-up at the end. The
lock-ordering constraint documented above the wait still holds: the
lock is acquired before lock_sock(), so a sender inside tcp_sendmsg()
can never be waited on while we hold the socket lock.
Two details of the old code go away with the same change:
- t_sock is now read only after the lock is acquired. The old code
cached it before waiting; the teardown in rds_conn_shutdown()
releases that socket and clears t_sock, so a pointer cached before
the wait can be stale by the time the accept path resumes. Reading
it under RDS_IN_XMIT is what makes the exclusion complete once the
teardown owns the same lock, which the next patch arranges; until
then the teardown still only samples the bit, and the two paths
remain as exposed to each other as they are today.
- The old !osock early path called rds_send_path_reset() with no
serialization at all. It now runs under the lock like the normal
path. The conditional RDS_CONN_RESETTING transition of the
previous patch happens before the socket check either way: a path
found without a socket is either still connecting (its reconnect
worker blocked on t_conn_path_lock) and legitimately goes
RESETTING -> UP on the new socket, or it has been torn down
meanwhile and is dropped.
The in-function comment describing the old wait-based quiesce is
rewritten to describe the lock-based one, and the stale block comment
above the function (which still described a return value and an
incomplete list of t_sock writers) is refreshed to name all four
writers - the connect, accept, teardown and swap paths - and what
serializes each of them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN ->
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: lpc32xx: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"lpc32xx_adc_probe() in drivers/iio/adc/lpc32xx_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in lpc32xx_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, lpc32xx_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
lpc32xx_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix CS held asserted and state leaks
In ad_sigma_delta_single_conversion(), set_mode(AD_SD_MODE_IDLE) and
disable_one() were called from the out: block while keep_cs_asserted
was still true. This caused any SPI transfer issued by those callbacks
to carry cs_change=1, leaving CS permanently asserted after the
conversion. Fix by moving both calls into the out_unlock: block, after
keep_cs_asserted is cleared, matching the pattern already used in
ad_sd_calibrate().
In the error path of ad_sd_buffer_postenable(), if an operation fails
after set_mode(AD_SD_MODE_CONTINUOUS) has already succeeded (e.g.
spi_offload_trigger_enable()), the device is left in continuous
conversion mode with CS physically asserted. Additionally,
bus_locked remaining true after spi_bus_unlock() causes subsequent
SPI operations to call spi_sync_locked() without the bus lock actually
held, allowing concurrent SPI access.
Fix the error path by clearing keep_cs_asserted first, then calling
set_mode(AD_SD_MODE_IDLE) to revert the device mode and deassert CS,
then clearing bus_locked before releasing the bus.
For devices that implement neither set_mode nor disable_one (such as
MAX11205, which has no physical CS pin), no SPI transfer is issued
during cleanup and the cs_change flag has no effect on any physical
line. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |