| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| When CONFIG_THREAD_STACK_MEM_MAPPED is enabled, each thread stack is mapped into the kernel virtual address space with a guard page on either side, and the mapping is released during abort cleanup. k_thread_abort_cleanup() in kernel/thread.c has two paths: a deferred one for self-abort, which stashes the mapping in thread_cleanup_stack_addr/thread_cleanup_stack_sz, and an immediate one for a thread aborted by some other thread. The immediate path called do_thread_cleanup(), which ignored its thread argument and only ever unmapped the stashed address — a value populated exclusively by the self-abort path. The mapped stack of a thread aborted by another thread was therefore never unmapped.
Every k_thread_abort() of a non-current thread leaks the thread's stack region plus its two guard pages from the kernel virtual address space. Threads that end by returning from their entry function take the working self-abort path, so the leak is specific to explicit cancellation — k_thread_abort(), pthread_cancel(), osThreadTerminate(), or the kernel thread kill shell command. Both k_thread_create() and k_thread_abort() are system calls, so with CONFIG_USERSPACE an unprivileged user-mode thread that has been granted a thread object and a user-capable stack object can drive the leak from user mode, consuming a kernel-side resource it cannot otherwise touch.
With CONFIG_KERNEL_VM_SIZE defaulting to 8 MB, a few hundred create/abort cycles exhaust the runtime mapping region. k_mem_map_phys_guard() then returns NULL, and map_thread_stack() guards that only with __ASSERT_NO_MSG(), which is compiled out of production builds; thread creation proceeds to write through a NULL-derived stack base and faults in kernel mode. The impact is a persistent denial of service — a kernel fatal error requiring a reboot — with no memory disclosure or corruption, and it is limited to configurations where memory-mapped thread stacks are enabled (x86 targets with X86_MMU and demand paging disabled, where the option is implied by default). |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek: Fix IRQ domain leak when port fails to enable
When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port
from pcie->ports and frees the port structure. However, the IRQ domains set
up earlier by mtk_pcie_init_irq_domain() are never freed.
Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper,
mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when
mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in
the probe error path (during resume, child devices may have active MSI
mappings and the NOIRQ context prohibits sleeping locks),
mtk_pcie_enable_port() is changed to return an error code so callers can
distinguish the two paths and act accordingly.
This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC
support series. |
| Uncontrolled resource consumption in Windows Remote Procedure Call allows an unauthorized attacker to deny service over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Latch disable_idle_d3 per device
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: clear freeze listener on node removal
Generally userspace is supposed to explicitly clear freeze listeners
before they drop the refcount on the node ref to zero, but there's
nothing forcing that. Currently, in this scenario the freeze listener
remains in the freeze_listeners rbtree and in the remote node's freeze
listener list, even though the ref for which the listener is registered
is gone. This could potentially lead to a memory leak due to a refcount
cycle. Thus, remove the freeze listener in this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
xhci: sideband: fix ring sg table pages leak
xhci_ring_to_sgtable() allocates a temporary pages array and
uses it to build the returned sg_table with
sg_alloc_table_from_pages().
The error paths free the pages array, but the success path
returns the sg_table without freeing it. This leaks the temporary
array every time a sideband client gets an endpoint or event ring
buffer.
Free the pages array after sg_alloc_table_from_pages() succeeds.
The returned sg_table has its own scatterlist entries and does not
depend on the temporary array after construction. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: fix memory leaks on USB write failures
When rtw_usb_write_port() fails to submit a USB Request Block (URB)
(e.g., due to device disconnect or ENOMEM), the completion callback is
never executed.
Currently, the driver ignores the return value of rtw_usb_write_port()
in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these
functions rely on the completion callback to free the socket buffers
(skbs) and the transaction control block (txcb), a submission failure
results in:
1. A memory leak of the allocated skb in rtw_usb_write_data().
2. A memory leak of the txcb structure and all aggregated skbs in
rtw_usb_tx_agg_skb().
Fix this by checking the return value of rtw_usb_write_port(). If it
fails, explicitly free the skb in rtw_usb_write_data(), and properly
purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb().
The issue was discovered in practice during device disconnect/reconnect
scenarios and memory pressure conditions. Tested by verifying normal TX
operation continues after the fix without regressions. |
| Missing release of memory after effective lifetime in Windows DHCP Client allows an unauthorized attacker to deny service over an adjacent network. |
| Missing release of memory after effective lifetime in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| A memory leak flaw was found in cockpit-ws. The login page handler leaks a heap allocation on every unauthenticated request that carries a CockpitLang cookie, allowing a remote unauthenticated attacker to exhaust memory on the host and cause a denial of service. |
| A flaw was found in gss-ntlmssp. A memory leak occurs in the NTLM target-info parser when a crafted NTLM CHALLENGE message contains duplicated string-valued AV_PAIR entries. The parser allocates memory for each string value but does not free the previous allocation when the same AV_PAIR type appears more than once, leaking the earlier allocation. A malicious or man-in-the-middle server can exploit this to cause gradual memory exhaustion on the client during NTLM authentication, leading to a denial of service. |
| FFmpeg through 9.0.2 contains a memory leak vulnerability in alloc_frame() in libavcodec/vvc/refs.c that leaks SPS and PPS references when frame buffer allocation fails. Attackers can supply a crafted VVC (H.266) stream that repeatedly replaces parameter sets, steadily growing memory use and causing denial of service. |
| Wazuh Manager from 3.0.0 before 4.14.9 contains a memory leak vulnerability in the generic JSON decoder that allows remote attackers to exhaust wazuh-analysisd memory via repeated static fields. Attackers can enroll an agent through passwordless enrollment and send events with duplicate fields such as id, triggering an OOM kill that disables alerting. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| FFmpeg through 9.0.2 contains a memory leak vulnerability in libxevd_receive_frame() in libavcodec/libxevd.c that fails to free pkt_au when an access unit produces no picture. Attackers can supply a crafted EVC stream with many access units containing only parameter sets or non-frame NAL units to exhaust memory in the decoding application. |
| FFmpeg through 9.0.2 contains a memory leak vulnerability in vc1_decode_frame() in libavcodec/vc1dec.c that leaks slice buffers when init_get_bits8() fails. Attackers can supply crafted files with repeated oversized VC-1 slices exceeding the bit reader limit to exhaust memory of decoding applications. |
| FFmpeg through 9.0.2 contains a memory leak vulnerability in libavcodec/libx265.c because libx265_encode_frame() never frees the rpu.payload allocated by ff_dovi_rpu_generate(). Attackers can supply crafted Dolby Vision HEVC or AV1 files that leak one RPU allocation per encoded frame during libx265 transcoding, causing unbounded memory growth and denial of service. |