| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound.
The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation.
A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved.
The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback. |
| The Bluetooth Classic SDP client built its outgoing request PDUs with bt_sdp_create_pdu(), which allocates from the sdp_pool net-buf pool with a K_FOREVER timeout and no failure handling, in sdp_client_ss_search(), sdp_client_sa_search() and sdp_client_ssa_search() in subsys/bluetooth/host/classic/sdp.c. All of these run on the Bluetooth workqueue bt_workq (via sdp_client_work_handler(), the L2CAP sdp_client_connected() callback, or the continuation-state follow-up from a received response), which is the same single thread that dispatches incoming HCI ACL and event traffic, drives L2CAP, and performs connection and channel teardown. sdp_pool holds only CONFIG_BT_MAX_CONN buffers (one by default) and is shared with the SDP server role.
An unauthenticated peer within BR/EDR range can drive both halves of the trigger. The SDP L2CAP server is registered at BT_SECURITY_L0, so any inbound SDP request makes the device allocate the pool's buffer for a response, which is held until the controller has transmitted it. The same peer can then cause a client request to be issued while the pool is empty: in-tree profiles start SDP discovery from inbound connection callbacks (for example hfp_hf_accept() calls bt_sdp_discover() through hfp_hf_create(), and hfp_ag.c mirrors this), and a peer acting as an SDP server can force repeated client requests by answering with partial responses carrying continuation state.
With the pool empty, the allocation blocks uninterruptibly and freezes the entire Bluetooth host. The stall becomes permanent when the release of the outstanding buffer itself depends on the blocked workqueue: if the link carrying the queued PDU is dropped or stalls, hci_disconn_complete() and the L2CAP channel cleanup that purges the channel TX queue are themselves bt_workq work items, so the buffer is never returned. The result is an unrecoverable denial of service of all Bluetooth functionality until reboot; there is no memory-safety, confidentiality or integrity impact.
The fix allocates client PDUs with K_NO_WAIT via a new sdp_client_create_pdu(), propagates -ENOBUFS, parks the session on a new SDP_CLIENT_FLAG_WAIT_FOR_TX_BUF flag, and adds an sdp_pool destructor that re-submits the SDP client worker when a buffer becomes available. Note that the SDP server role still allocated from the same pool with K_FOREVER at this commit; that path was addressed separately. |
| Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java.
Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected.
This issue affects Apache DataSketches Java: through 9.0.0.
Users are recommended to upgrade to version 9.1.0, which fixes the issue. |
| The AVRCP browsing channel's L2CAP receive-buffer callback, browsing_avrcp_l2cap_alloc_buf() in subsys/bluetooth/host/classic/avrcp.c, allocated from the shared avctp_browsing_rx_pool with K_FOREVER. L2CAP invokes that callback from the Bluetooth RX work queue thread (bt_workq, "BT RX WQ"), both for the head buffer of a new SDU and — through l2cap_br_alloc_frag() and net_buf_append_bytes() — for every further fragment of a reassembled SDU. That same thread is the only context that ever releases these buffers, after bt_l2cap_br_recv_seg() delivers a completed SDU and calls net_buf_unref(), so a wait taken there can never be satisfied.
The pool holds CONFIG_BT_MAX_CONN + 1 buffers of CONFIG_BT_AVRCP_BROWSING_L2CAP_MTU bytes (two buffers of 339 bytes in the default configuration). A connected browsing peer can drain it because bt_l2cap_br_recv_seg() in subsys/bluetooth/host/classic/l2cap_br.c accepts the SDU length declared in an SAR_START segment without bounding it by br_chan->rx.mtu: a peer that announces a large SDU and then streams continuation segments forces one pool buffer per segment-worth of data. Once the pool is empty the next allocation blocks forever inside the callback.
Triggering the flaw requires a build with CONFIG_BT_CLASSIC and the experimental CONFIG_BT_AVRCP_BROWSING option, an application that registers AVRCP callbacks, and a BR/EDR peer that has established the AVRCP control channel and then the browsing channel, which requires an encrypted (paired) link. No malformed packet is needed — a few hundred bytes of ordinary segmented L2CAP traffic suffice.
The consequence is a permanent hang of the whole Bluetooth host, not just of AVRCP: the blocked thread drains bt_dev.rx_queue for all HCI ACL data and low-priority events and also runs the host's internal work items, so all connections stop being serviced and the state is unrecoverable without a reboot. There is no memory-corruption or information-disclosure component. The fix allocates with K_NO_WAIT, so an empty pool now yields a local-busy indication or a channel disconnect that the application can recover from. |
| An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected. |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order
is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely.
Impact summary: An attacker able to supply the recipient certificate to an
application performing CMS encryption can cause that application to loop
indefinitely, consuming CPU and resulting in Denial of Service.
CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or
more recipient certificates and, for an EC recipient, generate an ephemeral
key in the recipient's group. If the certificate declares a group order of 1,
random scalar generation can only produce zero. The key generation routine
then retries without limit while waiting for a nonzero private scalar, so the
call never returns.
The OpenSSL TLS and QUIC implementations do not use this path. An application
is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient
certificate whose EC parameters are attacker-controlled. Certificates with
normal EC group orders do not trigger the loop.
OpenSSL 4.0 and later reject unknown explicit EC groups in default builds.
These versions are affected only when configured with the
enable-ec_explicit_curves option.
The result is a hang that consumes a CPU core until the process is
interrupted, a Denial of Service. The severity is Low because the attacker
must supply the recipient certificate and the application must choose to
encrypt to it; ordinary CMS encryption to trusted recipients is unaffected.
The fix makes EC key generation fail when the group has no valid nonzero
private scalar, instead of retrying indefinitely.
FIPS impact: no
The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider
does not support arbitrary explicit EC domain parameters, so an order-1 group
is rejected during key import before the vulnerable key generation path is
reached. |
| Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fwd_netdev: use recursion counter in neigh egress path
nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the
forwarding rule targets the same device or two devices forward to each
other, neigh_xmit() triggers dev_queue_xmit() which re-enters
nf_hook_egress(), causing infinite recursion and stack overflow.
Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT
to the shared header nf_dup_netdev.h as a static inline, so that
nft_fwd_netdev can use the recursion counter directly without exported
function call overhead. Guard neigh_xmit() with the same recursion
limit already used in nf_do_netdev_egress().
[ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ] |
| An inclusion of web functionality from an untrusted source could allow remote code execution on SpaceCom |
| In the NAS Authentication Request message decoding procedure, a missing lower bound check causes an infinite loop, leading to Denial of Service. |
| Deadlock for some Intel(R) Arc(TM) B-series graphics cards within Ring 1: Device Drivers may allow a denial of service. Unprivileged software adversary with an authenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present with special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Action Pack is a framework for handling and responding to web requests. Prior to 8.1.4.1 and 8.0.5.2, ActionController::Live::Buffer#close pushes its end-of-stream marker onto the response's bounded queue while it holds the buffer's monitor. When the client has stopped reading and the queue is full, the push blocks, and Buffer#abort, which runs when the client disconnects or a write times out, waits indefinitely for the same monitor. Each such response could permanently hold a web server thread and its ActionController::Live thread, possibly resulting in a DoS vulnerability through thread exhaustion. Applications that stream responses with ActionController::Live, including send_stream, are affected. Applications that serve large files through Active Storage proxy mode are exposed to unauthenticated clients. This issue is fixed in versions 8.1.4.1 and 8.0.5.2. |
| A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests. |
| Omnispace Agora Project before 26.10.0 contains an authentication bypass vulnerability that allows attackers possessing a user's stored bcrypt password hash to authenticate as that user without knowing the actual password, caused by the legacy AGORAP_LOG/AGORAP_PASS cookie mechanism treating the stored hash as a directly replayable bearer credential. Attackers can set the AGORAP_LOG/AGORAP_PASS cookies with a stolen password hash to impersonate any user, including administrators, and gain unauthorized access to the application. |
| Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker
drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the
descriptor cursor by an attacker-supplied fip_dlen without ever
requiring dlen >= sizeof(struct fip_desc) in the default branch. The
named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked
their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor
(fip_dtype >= 128, which the standard requires receivers to silently
ignore) skipped that check entirely.
An unauthenticated L2 peer on the FCoE control VLAN could hang
fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely
by emitting one FIP CVL frame whose single descriptor had fip_dtype ==
FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes
per iteration and the loop condition rlen >= sizeof(*desc) stayed true
forever, blocking every subsequent FIP frame on that controller.
Tighten the outer dlen guard to also reject dlen < sizeof(struct
fip_desc), so a malformed descriptor whose length cannot even cover the
descriptor header is rejected before the switch. This is the same
lower-bound the named cases already apply and is the minimum scope that
closes the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Use spin_lock_bh for hn_lock
nvmet_tcp_state_change(), a socket callback that runs in BH context,
can reach handshake_req_cancel() via nvmet_tcp_schedule_release_queue()
and tls_handshake_cancel(). handshake_req_cancel() acquires
hn->hn_lock with plain spin_lock(). If a process-context thread on
the same CPU holds hn->hn_lock when a softirq invokes the cancel path,
the lock attempt deadlocks. This is the only caller that invokes
tls_handshake_cancel() from BH context; every other consumer calls it
from process context.
Deferring the cancel to process context in the NVMe target is not
straightforward: nvmet_tcp_schedule_release_queue() must call
tls_handshake_cancel() atomically with its state transition to
DISCONNECTING. If the cancel were deferred, the handshake completion
callback could fire in the window before the cancel runs, observe the
unexpected state, and return without dropping its kref on the queue.
Reworking that interlock is considerably more invasive than hardening
the handshake lock. Convert all hn->hn_lock acquisitions from
spin_lock/spin_unlock to spin_lock_bh/spin_unlock_bh so the lock is
never taken with softirqs enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix uninitialized transport header access in alb_determine_nd()
alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers.
However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets
or forwarded packets), skb->transport_header is not guaranteed to be
initialized. While pskb_network_may_pull() ensures the packet data is
linear starting from the network header, it does not set or adjust the
transport header offset.
Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory.
Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(),
and reload ipv6hdr in case pskb_may_pull() reallocated skb->head.
Also remove the unused bond argument from alb_determine_nd(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |