Search Results (1393 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-128987 2 Red Hat, Redhat 2 Enterprise Linux, Enterprise Linux 2026-11-16 6.2 Medium
A flaw was found in dbus. A local attacker can exploit this vulnerability by connecting to an affected service, requesting a response, and stopping socket reads while keeping the connection open. Because the socket transport handles broken pipe write errors as retryable, the application enters a continuous retry loop. This can lead to excessive CPU consumption, resulting in a denial of service (DoS) for the target process.
CVE-2026-99294 1 Linux 2 Linux, Linux Kernel 2026-11-16 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_fwd_netdev: use recursion counter in neigh egress path nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the forwarding rule targets the same device or two devices forward to each other, neigh_xmit() triggers dev_queue_xmit() which re-enters nf_hook_egress(), causing infinite recursion and stack overflow. Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT to the shared header nf_dup_netdev.h as a static inline, so that nft_fwd_netdev can use the recursion counter directly without exported function call overhead. Guard neigh_xmit() with the same recursion limit already used in nf_do_netdev_egress(). [ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
CVE-2026-33969 1 Samsung Semiconductor 19 Exynos 1280, Exynos 1330, Exynos 1380 and 16 more 2026-11-15 7.5 High
In the NAS Authentication Request message decoding procedure, a missing lower bound check causes an infinite loop, leading to Denial of Service.
CVE-2026-126237 1 Fortinet 1 Fortiauthenticator 2026-11-13 7.5 High
A loop with unreachable exit condition ('infinite loop') vulnerability in Fortinet FortiAuthenticator 8.0.0 through 8.0.3, FortiAuthenticator 6.6.0 through 6.6.10 may allow an attacker to cause a denial of service via crafted TCP requests.
CVE-2026-123607 1 Hickory-dns 1 Hickory-dns 2026-11-13 7.5 High
Hickory DNS hickory-proto 0.25.0-alpha.3 through 0.25.2 and hickory-net before 0.26.1 contain an unbounded loop vulnerability in DnssecDnsHandle NSEC3 closest-encloser proof validation when the SOA owner is not an ancestor of the QNAME. Upstream attackers can return NoData or NXDomain responses with a cross-zone SOA record to panic debug builds or exhaust memory in release builds.
CVE-2026-63890 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop.
CVE-2026-98106 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: drm/pagemap: Prevent double migration of device pages A device-private folio migrated to system memory by a CPU fault can remain reachable through the raw-PFN eviction path until migration finalization drops the source reference. If eviction selects the same device-private folio during this window, it can attempt to migrate the folio again. The second migration can leave an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to retry indefinitely and resulting in a soft lockup and RCU stall. Mark successfully migrated device-private folios using a low bit of their zone_device_data before migration finalization. Make both CPU-fault and raw-PFN migration paths skip device-private folios carrying this flag. Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve it when a device-private folio is split. Keeping the state on the physical folio also avoids depending on a virtual address that may change before a fault occurs. v2: - Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost) - Mark every base page covered by a migrated folio so retirement remains valid if the folio is later split. v3: - Store the migrated state in a low bit of zone_device_data instead of adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost) - Mask the flag when retrieving the ZDD and preserve it when splitting a folio. - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ v4: - Advance by the folio size only for migration entries marked with MIGRATE_PFN_COMPOUND. (Sashiko) v5: - Simplify ZDD flag updates and folio iteration. (Matthew Brost) - Skip retired device-private folios in the CPU-fault path. (Matthew Brost) - Preserve flag bits while taking a new ZDD reference for split folios. v6: - Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration entries are processed one at a time. (Sashiko) - Drop the pre-existing fixes already covered by Matthew Brost's series: https://patchwork.freedesktop.org/series/171651/ The lockup was observed as: [10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557] [10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE [10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023 [10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe] [10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [10109.860655] Call Trace: [10109.860655] <TASK> [10109.860657] folio_lruvec_lock_irqsave+0x216/0x220 [10109.860661] ? __pfx_lru_add+0x10/0x10 [10109.860665] folio_batch_move_lru+0xc8/0x450 [10109.860670] ? lock_acquire+0xc4/0x2d0 [10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0 [10109.860677] ? folio_migrate_mapping+0xa6/0x110 [10109.860679] ? folio_migrate_flags+0x13b/0x1b0 [10109.860681] ? __pfx_lru_add+0x10/0x10 [10109.860683] __folio_batch_add_and_move+0xe7/0x2e0 [10109.860685] ? dma_iova_try_alloc+0xb0/0x140 [10109.860689] folio_add_lru+0x64/0x80 [10109.860691] __migrate_device_finalize+0x12c/0x270 [10109.860695] migrate_device_finalize+0x10/0x20 [10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper] [10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper] [10109.860709] xe_svm_bo_evict+0x15/0x20 [xe] [10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe] [10109.860921] xe_bo_move+0x107e/0x1570 [xe] [10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe] [10109.861059] ? __up_read+0x98/0x2b0 [10109.861061] ? lock_is_held_type+0xa3/0x130 [10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm] [10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm] [10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm] [10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm] [10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe] [10109.861198] ttm_bo_alloc_resource+0x219/0 ---truncated---
CVE-2026-90585 1 Zephyrproject 1 Zephyr 2026-11-12 4.6 Medium
The Renesas RA SCI UART driver's receive-error ISR, uart_ra_sci_eri_isr() in drivers/serial/uart_renesas_ra_sci.c, acknowledged the error condition only when a Zephyr interrupt-driven callback had already been registered. With CONFIG_UART_INTERRUPT_DRIVEN=y and CONFIG_UART_ASYNC_API=n, if data->user_cb is NULL the ISR body is empty: the SCI error flags (SSR.ORER, SSR.FER, SSR.PER) are left set and the ICU event flag R_ICU->IELSR_b[eri_irq].IR is never cleared, so the interrupt re-pends immediately and the ISR is re-entered without end. The error interrupt is masked at boot by uart_ra_sci_init(), but FSP's R_SCI_UART_Open() unconditionally re-enables it, and uart_ra_sci_configure() - the back end of the public uart_configure() API, enabled by default via CONFIG_UART_USE_RUNTIME_CONFIGURE - performs a Close()/Open() pair without re-masking it. Any runtime uart_configure() therefore leaves the error interrupt live regardless of whether a callback has been set, as does calling uart_irq_err_enable() on its own. An instance used with the polling API, or the window between uart_configure() and uart_irq_callback_user_data_set(), thus runs with the error interrupt unmasked and no callback registered. The trigger is an ordinary receive line error - overrun, framing, parity, or a break condition - which is fully determined by the device attached to the serial link. A peer able to assert a break or transmit at a mismatched baud rate produces such an error at will, so a single frame is enough to enter the state. The impact is availability only: the CPU is captured in the re-entering ISR and never returns to thread context, hanging the entire system until an external reset or hardware watchdog fires. There is no memory corruption or information disclosure. Builds using the asynchronous UART API are unaffected, because the fall-through to FSP's sci_uart_eri_isr() clears both the error flags and the pending IRQ.
CVE-2026-63983 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/sched: fix packet loop on netem when duplicate is on When netem duplicates a packet it re-enqueues the copy at the root qdisc. If another netem sits in the tree the copy can be duplicated again, recursing until the stack or memory is exhausted. The original duplication guard temporarily zeroed q->duplicate around the re-enqueue, but that does not cover all cases because it is per-qdisc state shared across all concurrent enqueue paths and is not safe without additional locking. Use the skb tc_depth field introduced in an earlier patch: - increment it on the duplicate before re-enqueue - skip duplication for any skb whose tc_depth is already non-zero. This marks the packet itself rather than mutating qdisc state, therefore it is safe regardless of tree topology or concurrency.
CVE-2026-63982 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop When mirred redirects to ingress (from either ingress or egress) the loop state from sched_mirred_dev array dev is lost because of 1) the packet deferral into the backlog and 2) the fact the sched_mirred_dev array is cleared. In such cases, if there was a loop we won't discover it. Here's a simple test to reproduce: ip a add dev port0 10.10.10.11/24 tc qdisc add dev port0 clsact tc filter add dev port0 egress protocol ip \ prio 10 matchall action mirred ingress redirect dev port1 tc qdisc add dev port1 clsact tc filter add dev port1 ingress protocol ip \ prio 10 matchall action mirred egress redirect dev port0 ping -c 1 -W0.01 10.10.10.10
CVE-2026-63969 1 Linux 1 Linux Kernel 2026-11-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible infinite loop in rt6_fill_node() Sashiko reported this issue [1]. Apply the same fix as commit f8d8ce1b515a ("ipv6: fix possible infinite loop in fib6_info_uses_dev()"). Writers holding tb6_lock can list_del_rcu(&rt->fib6_siblings) without waiting for RCU readers; rt->fib6_siblings.next then still points into the old ring and this softirq-side walker never reaches &rt->fib6_siblings, causing a CPU stall. fib6_del_route() always WRITE_ONCE()s rt->fib6_nsiblings to 0 before list_del_rcu(), so an inside-loop check is a reliable detach signal. [1] https://sashiko.dev/#/patchset/20260526020227.4857-1-jiayuan.chen%40linux.dev
CVE-2026-118037 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula.
CVE-2026-118036 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering.
CVE-2026-118035 1 Progress 1 Telerik Document Processing Libraries 2026-11-12 7.5 High
In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document.
CVE-2026-123604 1 Hickory-dns 1 Hickory-dns 2026-11-12 7.5 High
Hickory DNS hickory-resolver 0.26.0-beta.1 before 0.26.2 contains an unbounded retry loop in NameServerPool::try_send, which re-queues truncated (TC) responses without checking the answering transport or counting iterations. A malicious authoritative server returning TC=1 on every transport keeps the resolver spinning on a persistent TCP connection until the 5-second request deadline expires, causing resource exhaustion.
CVE-2026-109832 2 Red Hat, Redhat 3 Enterprise Linux, Enterprise Linux, Rhel Eus 2026-11-12 7.5 High
A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. In the VNC TLS I/O handlers, retryable GnuTLS results (GNUTLS_E_AGAIN and GNUTLS_E_INTERRUPTED) are handled with an unbounded busy loop instead of yielding to the event loop. A remote attacker who can reach an enabled VNC TLS listener can cause the event-loop thread to spin at high CPU with no forward progress, resulting in denial of service.
CVE-2026-54886 1 Erlang 4 Erlang/otp, Erlang\/otp, Erlang\/ssh and 1 more 2026-11-11 4.3 Medium
Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to render an SFTP channel permanently unresponsive. The handle_data/4 function in ssh_sftpd contains a catch-all clause that accepts channel data of any type. When channel data with a non-zero type code (SSH_MSG_CHANNEL_EXTENDED_DATA) arrives with an empty pending buffer and a payload at or below the SFTP packet size limit, the clause tail-calls itself with identical arguments, creating an infinite loop. The SFTP protocol operates exclusively on normal channel data (type 0). Extended data (non-zero type) is meaningless for SFTP and is never sent by conforming clients. However, the SSH protocol permits any channel participant to send extended data on an open channel, so an authenticated SFTP client can trigger the loop by sending SSH_MSG_CHANNEL_EXTENDED_DATA with any data_type_code and any non-empty payload at or below the size limit. The targeted ssh_sftpd process enters an infinite tail-recursive loop. It never processes another message, its message queue grows without bound, and it can only be stopped by killing the process. BEAM's reduction-based scheduler preemption continues to function, so other processes on the node are not starved, but each stuck channel process consumes its full CPU time share continuously and accumulates unbounded message queue memory. Opening many channels amplifies the CPU and memory impact. Erlang/OTP SSH configurations using the default max_channels setting (infinity) allow an authenticated user to open unlimited channels per connection, amplifying the attack without requiring multiple TCP connections or authentications. No file contents, credentials, or write access are obtainable through this issue. The impact is limited to denial of service on targeted SFTP channels, with secondary CPU degradation and memory growth. This vulnerability is associated with program file lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_data/4. This issue affects OTP from OTP 17.0 before OTP 27.3.4.14, OTP 28.5.0.3, and OTP 29.0.3, corresponding to ssh from 3.0.1 before 5.2.11.9, 5.5.2.2, and 6.0.2. Whether OTP before OTP 17.0, corresponding to ssh before 3.0.1, is affected is unknown.
CVE-2026-54119 1 Microsoft 24 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 21 more 2026-11-11 7.5 High
Loop with unreachable exit condition ('infinite loop') in Windows Active Directory allows an unauthorized attacker to deny service over a network.
CVE-2026-50324 1 Microsoft 15 .net, .net Framework, Windows 10 1607 and 12 more 2026-11-11 5.9 Medium
Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.
CVE-2026-50647 1 Microsoft 27 .net, .net Framework, Windows 10 1607 and 24 more 2026-11-10 7.5 High
Loop with unreachable exit condition ('infinite loop') in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network.