| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inconsistent transition-capture state in PostgreSQL MERGE allows a table data modifier to make an AFTER trigger process the wrong new row, via a partitioned table MERGE that performs an INSERT before an UPDATE. Within major versions 15-18, minor versions before PostgreSQL 18.7, 17.12, 16.16, and 15.20 are affected. Versions before PostgreSQL 15 are unaffected. |
| Out of bounds read in Skia in Google Chrome prior to 157.0.8103.78 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Dancer versions before 1.3400 for Perl pass unvalidated session ids from the session cookie to the session engine.
read_session_id returns the cookie value as the session id without checking its characters, and Dancer hands it to the session engine to load the session.
A remote attacker may cause path traversal or injection in a session engine that uses the id in a file path, cache command or query without checking it. |
| bootutil_img_hash() computes the image digest over ih_hdr_size + ih_img_size + ih_protect_tlv_size bytes, all three taken from the candidate image's header, and reads that span out of the slot without checking that it fits in the flash area. The three sizes are also summed without an overflow check. Nothing earlier on the validation path bounds the whole span either: bootutil_img_validate() compares the image size against bootutil_max_image_size() only after the hash has been computed.
The callers bound part of the span, or none of it:
On the swap and overwrite upgrade path, boot_validate_slot() first runs the image header check (boot_is_header_valid(), later boot_check_header_valid()). Before MCUboot 2.2.0 that check covered only ih_hdr_size + ih_img_size, so for every image the protected-TLV area (ih_protect_tlv_size, a uint16_t, up to 65535 bytes) was hashed without being bounded. From 2.2.0 the check includes ih_protect_tlv_size, except for a compressed image in the secondary slot when MCUBOOT_DECOMPRESS_IMAGES (CONFIG_BOOT_DECOMPRESSION) is enabled, which leaves the same gap of up to 64 KB.
Zephyr's single-slot and firmware loaders (boot/zephyr/single_loader.c, boot/zephyr/firmware_loader.c) read the header with boot_image_load_header(), which bounds ih_hdr_size + ih_img_size against the flash area. Before MCUboot 2.4.0 that bound did not include ih_protect_tlv_size, which leaves the same gap of up to 64 KB. From 2.4.0 these loaders bound the whole span.
The serial recovery image-list and image-state handlers (bs_list() and bs_set() in boot/boot_serial/src/boot_serial.c) call bootutil_img_validate() with no header check at all, so on those paths ih_img_size is unbounded as well.
The image is hashed before its signature is checked, so anyone who can place an image in a slot (an OTA or SMP update delivered through the application, or serial recovery) reaches this read before authentication.
Whether a malformed header produces an actual read beyond the area depends on the flash backend:
Backends whose flash_area_read() bounds-checks the request (Zephyr, Espressif, NuttX, Mbed) return an error once the chunked read crosses the end of the area. Validation fails and the image is rejected, with no over-read.
With MCUBOOT_HASH_STORAGE_DIRECTLY (Zephyr CONFIG_BOOT_IMG_HASH_DIRECTLY_ON_STORAGE, available from 2.2.0, not enabled by default) the span is hashed through a single direct pointer into memory-mapped flash, with no bounds check.
The Cypress PSoC6 port's flash_area_read() (boot/cypress/cy_flash_pal/cy_flash_map.c, from 1.6.0) does not bound the read: its assert()s compare against the area's absolute offset rather than its size, and it copies with memcpy().
The bytes read past the area feed only the digest, which is compared internally and never returned, so nothing is disclosed. The realistic effect is a read fault during image validation: up to 64 KB past the slot on the upgrade path and, before 2.4.0, on the Zephyr loaders, and potentially much further on the serial recovery handlers, which skip the header check. Where validation is repeated at every boot (a pending upgrade, or, before 2.4.0, the single-slot loader checking its image), the fault can recur on each reset and keep the device from booting.
The fix makes bootutil_img_hash() add the three sizes with boot_u32_safe_add() and reject an image whose span, including the sector offset used in swap-using-offset mode, does not fit in the flash area, before any of it is hashed. Because the bound is applied where the bytes are read, it covers every caller. |
| The MCUboot TLV iterator bootutil_tlv_iter_next() in boot/bootutil/src/tlv.c walks image trailer TLVs with a single loop guard (it->tlv_off < it->tlv_end) and advances by sizeof(struct image_tlv) + tlv.it_len using the attacker-controlled it_len field, without validating that the entry's header or payload stays within it->tlv_end. As a result the 4-byte header read can extend up to 3 bytes past the declared TLV area, and the returned (off, len) can describe a payload that runs past it.
The path is pre-authentication: TLVs are parsed during bootutil_img_validate() before the signature is verified, and a crafted image can be presented through DFU / serial-recovery / OTA. However the impact is contained by surrounding guards: bootutil_img_validate() first rejects a TLV area larger than bootutil_max_image_size(), the default LOAD_IMAGE_DATA sink is flash_area_read() which bounds-checks against the flash partition and fails an out-of-partition read, and every payload consumer (EXPECTED_HASH_TLV, EXPECTED_KEY_TLV, EXPECTED_SIG_TLV, IMAGE_TLV_SEC_CNT) clamps len against a fixed buffer before copying.
The residual effect in a default flash build is therefore an out-of-region read confined to the attacker's own slot partition whose result is never observable, yielding at worst a clean validation failure rather than memory corruption or information disclosure. A genuine (though still bounded) out-of-bounds read remains under the non-default MCUBOOT_RAM_LOAD configuration, where LOAD_IMAGE_DATA is an unchecked memcpy. The fix is to validate each entry's header and payload against it->tlv_end inside the iterator. |
| Mattermost Desktop App versions <=6.3 6.0.3 6.3.2.0 fail to validate the SiteURL value returned in a server's client configuration before constructing a server object from it which allows an operator of a server configured in the Desktop app to render the application persistently unusable across restarts via an unparseable SiteURL that triggers an uncaught exception reaching the process-level critical error handler. Mattermost Advisory ID: MMSA-2026-00770 |
| Out-of-bounds read can crash git-apply(1) when binary patch inflates to very large size |
| Arbitrary data can be read or written through git-fast-import(1) and git-fast-export(1) features not marked unsafe |
| Stack-based buffer overflow vulnerability in Apache HTTP Server's mod_vhost_alias (after CVE-2026-63292)
This issue affects Apache HTTP Server: 2.4.69. |
| Memory overflow in Base64 decoding in advanced policy expressions leading to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| A buffer over-read vulnerability in Fortinet FortiOS 7.4.0 through 7.4.3, FortiOS 7.2 all versions, FortiOS 7.0 all versions may allow an authenticated remote attacker to return a portion of device memory in the redirect response via submitting a specially crafted request. |
| Memory overflow in KBA (knowledge-based authentication) can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| A buffer overread caused by an integer-overflow in Proc/SProcXResQueryClientIds in X.Org xwayland before 24.1.15 and X Server before 21.1.26 could be used by attackers on authenticated X clients to crash the server or leak out information. |
| A stack buffer overflow in ProcXTestFakeInput DeviceValuator handling in X.Org xwayland before 24.1.15 and X server before 21.1.26 could be used by authenticated clients to crash or execute code in the X server. |
| Missing protection mechanism for alternate hardware interface vulnerability in Johnson Controls iSTAR Ultra, Johnson Controls iSTAR Ultra SE, Johnson Controls iSTAR Ultra G2, Johnson Controls iSTAR Ultra G2 SE, and Johnson Controls iSTAR Edge G2 allows CAPEC‑554: Functionality Bypass.
This issue affects iSTAR Ultra: before 6.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02; iSTAR Ultra G2: before 6.9.2.CU02; iSTAR Ultra G2 SE: before 6.9.2.CU02; iSTAR Edge G2: before 6.9.2.CU02. |
| Missing protection mechanism for alternate hardware interface vulnerability in Johnson Controls iSTAR Ultra and Johnson Controls iSTAR Ultra SE allows CAPEC‑554: Functionality Bypass.
This issue affects iSTAR Ultra: before 6.9.2.CU02; iSTAR Ultra SE: before 6.9.2.CU02. |
| Memory overflow in client-certificate authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| A user with the Viewer role can make Grafana allocate an unbounded amount of memory, and crash it, with a single SQL Expression query that casts a value to a very large BINARY length (memory allocation with excessive size value). |
| Memory overflow in WebAuth authentication can lead to unpredictable or erroneous behavior or Denial of Service in Citrix NetScaler ADC and Citrix NetScaler Gateway. |
| Cudy TR3000 before 2.5.42 contains a stack buffer overflow vulnerability in an obuspa getter for the TR-098 WLANConfiguration KeyPassphrase parameter, which copies the stored value with strcpy() into a 4,096-byte stack buffer without a length check. A malicious or compromised ACS can set a 5,000-byte passphrase via SetParameterValues, and a later read of the parameter overflows the buffer and crashes obuspa, causing denial of service. |