Search Results (26530 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99525 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_ses_add_channel() The error path of cifs_ses_add_channel() calls cifs_put_tcp_session() before cifs_chan_clear_need_reconnect(). The latter reaches cifs_ses_get_chan_index(), which dereferences server->terminate; if the put was the final reference, TCP_Server_Info is already freed and this is a use-after-free. Same put-then-use pattern as the recently fixed sibling in commit 717e0a25036b ("cifs: Fix server use-after-free in cifs_chan_skip_or_disable()"). Move the put last, but do not read chan->server after dropping chan_lock: chan points into ses->chans[], and once chan_count is decremented a concurrent add_channel can reuse the slot and overwrite the pointer, so the put would act on the new channel's server. Cache the pointer under chan_lock, clear the reconnect bit and decrement chan_count while still holding the reference, and release it after the unlock. This issue was discovered by Tencent CodeBuddy Security.
CVE-2026-99524 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a local reenq node left on an inactive cpu A local DSQ reenq is queued on the rq through a per-sched node and run from deferred work. When the reenq is requested from dispatch, the work is a balance callback queued once dispatch is done. A cpu going down installs balance push early in its teardown, and queue_balance_callback() refuses new callbacks from then on. ops.dispatch() keeps running on that cpu until the rq goes offline after an RCU grace period, so a reenq it requests in that window may never run. The IMMED handling in dispatch_one() requests one the same way. A reenq requested from elsewhere for a cpu that is already offline goes through irq_work_queue_on(), which warns, and its work doesn't run until the cpu comes back. Either way the node stays on the rq's list. When the scheduler is freed, scx_sched_free_rcu_work() warns and frees the pcpu with the node still linked, and the list is walked again once the cpu comes back. An inactive cpu's local DSQ holds only tasks that are bound to it or are being moved off, so the reenq is pointless. Ignore reenqs of an inactive cpu's local DSQ. The test is lockless. The hotplug thread of a cpu going down runs on that cpu, and it marks the cpu inactive before it installs balance push. A dispatch on the cpu runs to completion before that thread can run there, so a dispatch that saw the cpu active has queued its callback by then. Requests from outside dispatch run from the wakeup path or through irq_work, which balance push doesn't affect. The grace period after the cpu goes inactive waits for any requester that saw it active, so that irq_work is queued while the cpu is online.
CVE-2026-99523 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix DMABUF use-after-free during ufile cleanup The DMABUF release can race with ufile cleanup. When the cleanup holds hw_destroy_rwsem for write, uverbs_uobject_release() fails its trylock and leaves the uobject on the ufile list, but the dma_buf is freed as soon as the release returns. The cleanup then destroys the uobject and uses the freed dma_buf: BUG: KASAN: slab-use-after-free in uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 Read of size 8 at addr ff11000109cf14b0 by task repro/435 Call Trace: uverbs_dmabuf_fd_destroy_uobj+0x46/0x200 destroy_hw_fd_uobject+0x3f/0x50 uverbs_destroy_uobject+0xc5/0x380 __uverbs_cleanup_ufile+0x1a8/0x260 uverbs_destroy_ufile_hw+0x54/0x160 ib_uverbs_close+0x34/0x110 Allocated by task 435: dma_buf_export+0x1b5/0x530 ib_uverbs_handler_UVERBS_METHOD_DMABUF_ALLOC+0x223/0x3f0 Freed by task 436: kfree+0x301/0x530 dentry_kill+0x14c/0x560 __fput+0x23a/0x4a0 rdma_user_mmap_entry_remove() dereferences the same pointer. Protect the stored dma_buf pointer with a mutex and clear it before release returns. Use a shared revoke helper so uobject destruction and mmap entry removal both skip a cleared pointer. Hold a temporary uobject reference across uverbs_uobject_release() and the pointer update. Use a separate mutex because uobject destruction can free the mmap entry before release finishes. Map and unmap use attachment->dmabuf directly, so they do not need to take the new mutex while holding the reservation lock.
CVE-2026-99522 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: avoid use-after-free in icrdma_remove icrdma_remove() dereferences iwdev after calling irdma_ib_unregister_device(): irdma_ib_unregister_device(iwdev) -> ib_unregister_device(&iwdev->ibdev) -> __ib_unregister_device() -> ib_dealloc_device() irdma registers irdma_ib_dealloc_device() as the dealloc_driver callback in its ib_device_ops. The RDMA core explicitly documents ib_unregister_device() that when ops.dealloc_driver is used, ib_dev will be freed upon return from the function. The ib_device is embedded in struct irdma_device and iwdev itself was allocated by ib_alloc_device(irdma_device, ibdev). Consequently, once irdma_ib_unregister_device() returns, iwdev must no longer be dereferenced. However, icrdma_remove() currently accesses iwdev->rf afterwards when deinitializing interrupts, destroying ah_tbl_lock, and freeing rf. Although the final ib_device storage is released with kfree_rcu(), the object lifetime has already ended and callers must not rely on the RCU grace period to continue dereferencing iwdev. Save iwdev->rf before unregistering the RDMA device and use the saved pointer for the remaining cleanup. This issue was found by manual code inspection.
CVE-2026-99521 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in mport_mm_close() A use-after-free vulnerability was identified in mport_mm_close() in drivers/rapidio/devices/rio_mport_cdev.c, identical to the pattern previously addressed in dma_req_free(). This is observable from userspace when an application creates an mmap mapping via the RapidIO character device and subsequently unmaps it (or terminates, triggering exit_mmap()). During munmap, mport_mm_close() is invoked and drops the mapping reference via kref_put(). If kref_put() drops the last reference, mport_release_mapping() is called, which frees the underlying rio_mport_mapping structure. The subsequent mutex_unlock() then dereferences map->md to unlock buf_mutex, leading to a use-after-free: mport_mm_close() -> mutex_lock(&map->md->buf_mutex); ... -> kref_put(&map->ref, mport_release_mapping); /* map is freed */ -> mutex_unlock(&map->md->buf_mutex); /* UAF: map used */ Fix this by caching map->md before kref_put() and using the cached pointer for mutex unlocking, ensuring that freed memory is not accessed.
CVE-2026-99520 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: pps: generators: fix use-after-free when closing a removed device The cdev of a PPS generator is embedded in struct pps_gen_device, but nothing ties the lifetime of that structure to the cdev: pps_gen is freed by the release function of its device, and an open file holds a device reference only until pps_gen_cdev_release() drops it. When the generator is unregistered while /dev/pps-genN is open, that put_device() drops the last reference and frees pps_gen, and __fput() then calls cdev_put() on the freed cdev: BUG: KASAN: slab-use-after-free in cdev_put+0x53/0x60 Read of size 8 at addr ffff88801383e138 by task ppsgen64/149 Call Trace: cdev_put+0x53/0x60 __fput+0x745/0xad0 fput_close_sync+0xd9/0x1b0 __x64_sys_close+0x86/0xf0 ... Freed by task 149: kfree+0x25a/0x6d0 device_release+0xca/0x3c0 kobject_put+0x169/0x320 pps_gen_cdev_release+0x51/0x80 __fput+0x36a/0xad0 pps.c had the same bug, fixed in commit c79a39dc8d06 ("pps: Fix a use-after-free"). Fix it the usual way: embed the struct device in pps_gen_device and register both with cdev_device_add(). This makes the device the parent of the cdev, so the cdev holds a device reference until the last file is closed.
CVE-2026-99519 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: PM: EM: Fix use-after-free of perf domain in netlink doit handlers The doit handlers dropped em_pd_list_mutex before dereferencing the perf domain, so a concurrent device unregister could free it while the reply was being built. Encode the reply from em_perf_domain_for_id() callbacks, which run under the mutex, and allocate the skb outside of it, like the dumpit path already does. This issue was found by an in-house static analysis tool.
CVE-2026-99518 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix use-after-free unregistering kbd_led led kbd_led_update_all() registers asus->kbd_led with devm_led_classdev_register() on the platform device, but kbd_led is embedded in struct asus_wmi, which asus_wmi_remove() frees at its end. The driver core calls .remove() before devres_release_all(), so the deferred devres release runs led_classdev_unregister() on memory that has already been freed. Whether that faults depends on whether the slab has been reused in between, which makes the crash on module unload intermittent and silently corrupts the led classdev state in the remaining runs. Unregister the led classdev explicitly in asus_wmi_led_exit(), after the led workqueue has been destroyed: kbd_led_work can then neither run nor be queued anymore, since asus_ref.asus is NULL too, so kbd_led_registered is stable and the classdev can be released while the memory embedding it is still alive. devm_led_classdev_unregister() also drops the devres entry, leaving nothing to run at unbind cleanup time; it warns when no devres entry exists, hence the kbd_led_registered check.
CVE-2026-99517 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: nvmet: fix use-after-free of the old registrant in nvmet_pr_preempt() nvmet_pr_preempt() handles a preempt sent by the reservation holder by changing the reservation type with nvmet_pr_update_reg_attr(), unless the reservation is of an All Registrants type. For the holder that helper does not modify the registrant in place: it puts a copy on the registrant list, points pr->holder to the copy and passes the old registrant to kfree_rcu(). If the reservation type changed, nvmet_pr_preempt() then hands &reg->hostid of that old registrant to nvmet_pr_resv_released(). Unless the reservation released notification is masked, that function takes subsys->lock and compares the host id against every controller of the subsystem. The caller only holds pr->pr_sem and is not in an RCU read-side critical section, so nothing keeps the old registrant alive while it is read. The result is a read of 16 freed bytes that decides which controllers get the notification. Found by code inspection. kfree_rcu() defers the free, so it usually happens after the read; when the pending free is forced to run before the read, KASAN reports the host id as freed memory. Pass the host id of the controller that sent the command instead. The registrant was looked up by that host id, and the controller outlives the request.
CVE-2026-99516 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix use-after-free in nvmet_fc_ls_create_connection() nvmet_fc_ls_create_connection() looks up the association with nvmet_fc_find_target_assoc(), which returns it with a reference held, and drops that reference as soon as the target queue has been allocated. iod->assoc is then dereferenced again by nvmet_fc_makeconnid() while building the connection id. The queue only borrows the pointer and takes no reference of its own. Once the lookup reference is dropped the association is kept alive solely by the reference taken when it was created, so a disconnect LS or a remote port unregister running concurrently can free it before nvmet_fc_makeconnid() reads it: BUG: KASAN: slab-use-after-free in nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) Read of size 8 at addr ffff888179f1b000 by task kworker/u9:2/1167 Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nvmet-wq nvmet_fc_handle_ls_rqst_work Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:193 drivers/nvme/target/fc.c:1841 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> Freed by task 1167 on cpu 0 at 405.998150s: kasan_save_track (mm/kasan/common.c:57 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:584) __kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285) kfree (include/linux/kasan.h:235 mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720) nvmet_fc_handle_ls_rqst_work (drivers/nvme/target/fc.c:1808 drivers/nvme/target/fc.c:1995 drivers/nvme/target/fc.c:2021) process_scheduled_works (kernel/workqueue.c:3322 kernel/workqueue.c:3405) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (archkernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address belongs to the object at ffff888179f1b000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 0 bytes inside of freed 2048-byte region [ffff888179f1b000, ffff888179f1b800) Hold the lookup reference until the response has been built, and drop it on the error path as well.
CVE-2026-99515 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix event queue release use-after-free iommufd_eventq_fops_release() drops the file's users reference before reading eventq->ictx. Once that reference is dropped, IOMMU_DESTROY in another thread can remove and free the event queue, so the later load accesses freed memory. Read ictx while the users reference still pins the event queue, then drop the reference and put the saved context. The context reference taken by iommufd_eventq_init() keeps ictx valid until the put. Fault and vEVENTQ file descriptors share this release path.
CVE-2026-99514 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: landlock: Fix superblock use-after-free in release_inode() Without this fix, release_inode() (task 1) can race with a umount operation in hook_sb_delete() (task 2). The order of operations in which the race occurs is: * task 2: hook_sb_delete() arrives at the end of the function, waiting for landlock_superblock(sb)->inode_refs to become zero. * task 1: release_inode(): does atomic_long_dec_and_test(), decrementing inode_refs to zero. * task 2: gets woken up through some other means, sees that inode_refs is zero and returns. The caller is the unmount operation and proceeds to release the superblock. * task 1: Runs wake_up_var(&landlock_superblock(sb)->inode_refs), *dereferencing the sb_security on the freed-up superblock*. Notably, wake_up_var() does not dereference the pointer passed to it, and only uses it to determine an overapproximated set of tasks to wake up. So while it's potentially possible for an attacker to provide a different value for that pointer, this only results in the wrong set of tasks getting woken up, and in this scenario, no further tasks are actually waiting. Nevertheless, KASAN detects it as a slab-use-after-free read on sb->s_security: BUG: KASAN: slab-use-after-free in release_inode+0x196/0x290 Read of size 8 at addr ffff888103b6c0a8 by task repro/217 release_inode+0x196/0x290 landlock_put_object+0x71/0x90 landlock_free_rules+0x38/0xc0 landlock_put_ruleset+0x47/0x130 fop_ruleset_release+0x33/0x40 __fput+0x305/0x780 Freed by task 54: kfree+0x11c/0x390 process_scheduled_works+0x766/0xe50 worker_thread+0x7bc/0xb20 The fix is to determine &landlock_superblock(inode->i_sb)->inode_refs only once earlier in release_inode(), and later use that precalculated address for the wake_up_var() call, without having to dereference through the superblock.
CVE-2026-99513 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: lockd: Fix use-after-free in nlmsvc_retry_blocked nlmsvc_retry_blocked() examines the block at the head of nlm_blocked under nlm_blocked_lock, then releases the lock before calling nlmsvc_grant_blocked() or retry_deferred_block(). The nlm_blocked list reference is all that keeps the block alive across that window. nlmsvc_grant_blocked() does take one of its own, but not until after the lock has been dropped. Unmounting the nfsd filesystem while a lock request is still blocked reaches nlmsvc_traverse_blocks(), which drops the list reference and frees the block along with the nlm_rqst hanging off it. BUG: KASAN: slab-use-after-free in nlm_async_call+0xd6/0x230 Read of size 8 at addr ffff88811b04c808 by task lockd/8377 nlm_async_call+0xd6/0x230 nlmsvc_retry_blocked+0x61c/0x800 lockd+0x144/0x1c0 Freed by task 8392: nlmsvc_release_block+0x231/0x290 nlmsvc_traverse_blocks+0x139/0x1b0 nlm_traverse_files+0x1aa/0xa00 nlmsvc_free_host_resources+0x12/0x60 nlm_shutdown_hosts_net+0x127/0x280 lockd_down+0xd5/0x1c0 Take a reference before releasing nlm_blocked_lock and drop it once the retry has run.
CVE-2026-99512 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: au0828: fix use-after-free in bulk_timeout timer on disconnect start_urb_transfer() arms dev->bulk_timeout, whose callback au0828_bulk_timeout() queues dev->restart_streaming; that work in turn calls start_urb_transfer() and re-arms the timer. au0828_dvb_unregister() cancels restart_streaming on disconnect but does not sync bulk_timeout. au0828_usb_release() then frees dev with kfree(), so a timer still armed or pending at that point can fire after the free and dereference dev through timer_container_of(). Sync the timer with timer_shutdown_sync() before cancel_work_sync(). The timer callback queues the work, so the timer must be stopped first; the shutdown variant is needed because the work re-arms the timer through start_urb_transfer(). The dvb->frontend == NULL early return guards the register-failure path where the timer was never set up. This bug was found by static analysis.
CVE-2026-99511 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix use-after-free in cx23885_finidev due to race condition In cx23885_v4l2_dev_notify_init, &dev->cx25840_work is bound with cx23885_av_work_handler, and &dev->ir_rx_work and &dev->ir_tx_work are bound with cx23885_ir_rx_work_handler and cx23885_ir_tx_work_handler. cx23885_irq can schedule these works on system_wq when an AV_CORE interrupt is received, and the IR subdevice can also schedule the IR works from its interrupt service routine via the v4l2_device notify callback. If we remove the device, cx23885_finidev makes cleanup and the memory allocated for dev is released by kfree(dev), while the works mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | cx23885_irq | schedule_work(&dev->cx25840_work) cx23885_finidev | cx23885_input_fini(dev) | cx23885_ir_fini(dev) | cx23885_shutdown(dev) | free_irq(pci_dev->irq, dev) | pci_disable_device(pci_dev) | cx23885_dev_unregister(dev) | v4l2_device_unregister(v4l2_dev) | kfree(dev) | // dev is freed | | cx23885_av_work_handler | // use dev (use-after-free) Fix it by canceling the works after the IRQ handler that can schedule them has been stopped, and before proceeding with the remaining cleanup in cx23885_finidev. Note that the flush_work() calls in cx23885_input_ir_stop() do not close this race: they only wait for works that are already queued or running at that moment, they do not prevent the IRQ handler, which is still registered at that point, from scheduling the works again afterwards, and they are skipped entirely when dev->sd_ir is NULL. The cancel_work_sync() calls are therefore placed after free_irq(), the only point at which no new work can be scheduled.
CVE-2026-99510 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: hackrf: fix use-after-free in hackrf_alloc_urbs() error path hackrf_alloc_urbs() frees the URBs it allocated so far when one allocation fails, but leaves the entries in dev->urb_list[] and dev->urbs_initialized untouched. The caller, hackrf_start_streaming(), then calls hackrf_free_urbs() on the error path, which walks dev->urbs_initialized entries and calls usb_free_urb() a second time on the already-freed URBs, causing a use-after-free (slab-use-after-free Write in usb_free_urb()). Drop the redundant cleanup loop inside hackrf_alloc_urbs() and let hackrf_free_urbs(), which the caller already invokes on error, own the cleanup of the successfully allocated URBs.
CVE-2026-99509 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: imon: fix use-after-free in display_close via dev_dbg ictx->dev is a raw pointer to the usb_interface's embedded device. On disconnect, usb_disconnect() can drop the last reference on the interface and free it while a userspace fd for /dev/lcd0 is still open. When that fd is later closed, display_close() dereferences the now-freed ictx->dev via dev_dbg(), causing a use-after-free. Remove the dev_dbg() calls that dereference ictx->dev in display_close() and free_imon_context(), rather than taking a reference on the device.
CVE-2026-99508 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: media: ipu-bridge: Fix use-after-free in IVSC error path ipu_bridge_get_ivsc_acpi_dev() returns an ACPI device with a reference held. If no matching CSI device is found, ipu_bridge_check_ivsc_dev() drops that reference before passing the device to dev_err(). Concurrent CSI device and ACPI namespace removal can drop the other references, making this the final put. dev_err() then reads the freed struct acpi_device and its kobject name. This was reproduced without kprobes by racing normal CSI platform-device unregistration and ACPI configfs table removal against the production ipu_bridge_init() entry. KASAN reported the final free through device_release(), followed by invalid reads through _dev_err(). Emit the error message while the lookup reference is still held, then drop the reference as before. Source reproducers and vulnerable/fixed serial logs, with only the build hostname redacted, are available at: https://github.com/kimaiden1984-boop/linux-ipu-bridge-acpi-uaf-reproducer The fixed target builds with W=1 on x86-64. This was not tested on physical IPU hardware. The tests establish runtime reachability but do not measure occurrence frequency on shipping systems or establish exploitability.
CVE-2026-99507 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free in hugetlb_mfill_atomic_pte() Let's fix another instance where we use a folio after dropping the PTL, where someone else could e.g., MADV_DONTNEED it once we drop the PTL, making us trigger a use-after-free on the folio.
CVE-2026-99506 1 Linux 1 Linux Kernel 2026-11-19 N/A
In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix use-after-free of a new anon folio For a fault in a private mapping with nothing in the page cache, hugetlb_no_page() allocates a folio, locks it and maps it. The folio has one reference, which belongs to the page table entry from then on. After dropping the page table lock the function still sets the migratable flag of the folio and unlocks it. Whoever zaps the entry in between frees the folio. The fault holds the fault mutex and the lock of the vma. MADV_DONTNEED and the first unmap of a hole punch, hugetlb_vmdelete_list(), do not take the fault mutex, and a private vma only has a lock if it owns a reservation map: not with MAP_NORESERVE, and not in the child after fork(). Then the flag is set in, and folio_unlock() is called on, a folio that is free or has a new owner. A surplus page goes back to the page allocator while it is locked: BUG: Bad page state in process init pfn:108e00 flags: 0x200000000000059(locked|uptodate|dirty|head|node=0|zone=2) page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set A page of the pool can be given to the next user, of any file, who locks it and loses the lock to the late folio_unlock(): kernel BUG at mm/filemap.c:1532! hugetlb_no_page+0x111b/0x23e0 hugetlb_fault+0x3a9/0x14a0 An unprivileged process is enough: threads that write to a MAP_PRIVATE | MAP_NORESERVE hugetlb mapping, threads that call MADV_DONTNEED on it, and one that takes the freed pages for another file. Until commit 3a47c54f09c4 ("hugetlbfs: revert use i_mmap_rwsem for more pmd sharing synchronization") the fault held i_mmap_rwsem for reading, which everybody who zaps takes for writing. The lock that commit bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs") gave to private vmas closed the window again, but only for those with a reservation map. Be done with the folio before the page table lock is dropped, as hugetlb_wp() is with its copy. The function already unlocks page cache folios under that lock. Original fix generated by an LLM and sent in private by Josef. [david@kernel.org: simplify+move comment]