| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't modify a session slot when replaying its cached reply
nfsd4_sequence() claims a session slot by setting NFSD4_SLOT_INUSE
under nn->client_lock. A reply served from the slot's reply cache does
not claim it, and that distinction lived only in cstate->status, which
nfsd4_sequence() set to nfserr_replay_cache. Commit cc028a10a48c
("NFSD: Hoist status code encoding into XDR encoder functions") moved
nfsd4_proc_compound()'s cstate->status assignment below the out:
label, and the replay path's goto out was the one path that relied on
skipping it. The test in nfsd4_sequence_done() therefore no longer
identifies a replay, and every replay now stores its reply and clears
NFSD4_SLOT_INUSE as though it owned the slot.
NFSD4_SLOT_INUSE is the interlock: check_slot_seqid() rejects every
sequence id for a slot that is in use, before replay_matches_cache()
runs. A replay never sets it, so two replays can be in flight on the
same slot at once. One can read slot->sl_cred under nn->client_lock
while the other's completion frees and rebuilds it from the XDR
encoder without that lock. Two completions can also collide with each
other and release the same group_info twice. free_svc_cred() leaves
cr_uid, cr_gid and cr_flavor intact, so the reader passes every
earlier test in same_creds() and dereferences a NULL cr_group_info.
From a 6.12.91 production server:
BUG: kernel NULL pointer dereference, address: 0000000000000004
CPU: 63 UID: 0 PID: 39015 Comm: nfsd
RIP: 0010:same_creds+0x38/0xa0 [nfsd]
RDX: 0000000000000000
Call Trace:
nfsd4_sequence+0x6a8/0x910 [nfsd]
nfsd4_proc_compound+0x345/0x670 [nfsd]
nfsd_dispatch+0x100/0x220 [nfsd]
svc_process_common+0x311/0x700 [sunrpc]
svc_process+0x131/0x1c0 [sunrpc]
svc_recv+0x7ef/0x9c0 [sunrpc]
nfsd+0xa3/0x100 [nfsd]
Kernel panic - not syncing: Fatal exception
Since v6.14 a live session's slot table can shrink, and the unowned
store becomes a use-after-free write. nfsd4_sequence() defers the
shrink while a slot is in use, but it tests NFSD4_SLOT_INUSE, which a
replay does not set, so free_session_slots() can kfree() the slot the
replay still holds in cstate->slot.
Record the claim in cstate->slot_owned when nfsd4_sequence() accepts a
request and test that in nfsd4_sequence_done(), so only the request
that claimed the slot updates its cached reply and clears
NFSD4_SLOT_INUSE. svc_generic_init_request() zeroes the compound
response before each request, so the flag starts clear. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: properly handle refcounted PUD mappings on fork
copy_huge_pud() copies device-DAX entries without taking a folio reference
or updating mapcounts and the child's RSS.
For example, MADV_GUARD_INSTALL sets VM_MAYBE_GUARD on a device-DAX VMA,
forcing copy_page_range() to traverse the whole VMA on fork. Any remaining
huge PUDs are then copied without accounting for the new mappings.
Unmapping them in the child decrements accounting that was never added.
Use vm_normal_page_pud() to identify refcounted mappings. Take a folio
reference and add the child's PUD rmap and RSS accounting before installing
the copied entry. Pass src and dst VMAs consistently instead of src and
dst MM. Move the TODO. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: bound POSIX lock data area by response length
CIFSSMBPosixLock() receives a TRANS2 response whose server-provided
DataOffset and DataCount are not required by validate_t2() to describe an
interval inside the response. A server can therefore make the client read a
cifs_posix_lock beyond the response buffer and return those kernel bytes
through F_GETLK.
Use smbCalcSize() to obtain the full response length after any multipart
TRANS2 reassembly, then reject data areas that extend past it before
dereferencing them. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: fix buffer length underflow in RDMA transfers
When a remote buffer descriptor is larger than the remaining local
buffer, smbdirect_connection_rdma_xmit() clamps its length and sets
buf_len to zero. The common accounting code then subtracts the clamped
length from buf_len, causing it to underflow. If another descriptor
follows, the loop processes it with a wrapped remaining length and
includes memory beyond the local buffer in the RDMA transfer.
A client can trigger an out-of-bounds kernel write with an SMB WRITE
request, or an out-of-bounds kernel read with an SMB READ request, by
supplying multiple RDMA buffer descriptors with an oversized descriptor
before the last one.
Remove the premature assignment to buf_len. Subtracting the clamped length
already consumes the remaining buffer, so the next iteration stops and
only descriptors within the local buffer are used to build work requests. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: size directory name conversion buffer correctly
A 2048-byte ASCII directory name needs 4098 bytes when converted to
UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps
its allocation at PATH_MAX and writes past the end of that buffer.
Allocate space for one UTF-16 code unit per input byte plus the
terminator. Use kmalloc_array() to check the size calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Verify the iSCSI ISID is null-terminated
iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b
TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list,
lowercased in place and never null-terminated. spc4r37 Table 508 requires
the field to be null-terminated, but a non-conforming initiator can omit
the NULL; when the ISID ends at the end of the received buffer, the pointer
is not a C string.
The registration code still consumes it as one: strcmp() in
__core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and
snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads
its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check
does not bound that read.
When the parameter list spans more than one page, transport_kmap_data_sg()
maps it with vmap(), and the over-read walks off the end of the mapping
into the vmalloc() guard page and oopses. Reproduced with a PR OUT
REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final
TransportID carries a 12-byte ISID without a terminating NUL:
BUG: unable to handle page fault for address: ffffc9000138c000
RIP: 0010:strcmp+0xc/0x30
Call Trace:
__core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod]
core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod]
core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod]
...
iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod]
With a single-page parameter list the buffer is a kmap() direct mapping, so
the over-read continues into the physically adjacent page instead of
faulting. snprintf("%s") then copies whatever follows the ISID in memory
into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back
to any initiator, turning the over-read into an info leak of kernel heap
contents. Reproduced with a 4096-byte parameter list whose last
TransportID ends at the end of the buffer with a 4-byte ISID and no NUL,
interleaved with I/O to populate adjacent pages: the READ FULL STATUS
response returned the ISID as "0xleak" followed by raw bytes that were not
part of the parameter list. The snprintf() into
pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at
most 11 bytes past the buffer are leaked per command, but the PR OUT
command is not rate limited.
Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger
either variant, including a guest via vhost-scsi.
Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the
rest of the descriptor, before the ISID pointer is returned. REGISTER AND
MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port
claims the malformed TransportID, and the command fails the same way. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: account for chunk padding in sctp_init_cause()
sctp_init_cause() accepts a chunk when skb_tailroom() can hold the
cause header and the payload. sctp_addto_chunk() then writes 0-3
bytes of padding before that header so the chunk stays 4-byte
aligned. The check does not include the padding, and the following
skb_put() calls skb_over_panic() from softirq.
Count the padding sctp_addto_chunk() is about to write. The cause
length on the wire stays the header plus the payload.
Found by LLM inspection, triggered and tested the fix. |
| Dell PowerStore SDNAS contains an authentication-bypass-by-replay vulnerability in the NAS NDMP service that could allow a network attacker to gain backup and restore control of the appliance. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: do not copy up a dentry that was removed
A change to a removed file through an open descriptor replaces whatever
has its old name in the upper layer.
Copy up must only create a name in the upper directory, never replace
one. After an unlink, an rmdir or a rename over a lower dentry, a
dentry that an open file keeps alive still has its old parent and name,
but in the upper directory that name is now a whiteout or a new object.
ovl_copy_up_workdir() renames the copy over it, which brings back the
removed object and destroys whatever took its name.
An unprivileged user opened a lower FIFO and unlinked it, root created
a file at that name, and fchmod on the old descriptor replaced the file
of root with the FIFO.
Fix this by looking up the target name of the rename in
ovl_copy_up_workdir() with LOOKUP_EXCL, so that copy up fails with
-EEXIST if the name is taken, as copy up with O_TMPFILE already does
when it links the copy to the name.
[amir: use LOOKUP_EXCL instead of relying on d_unhashed()] |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: set OVL_WHITEOUTS before publishing the upper dir
Listing a directory while it is copied up causes a use-after-free of
the readdir cache.
A merge directory must never be iterated as a real upper directory:
that mode frees the cache in OVL_I(inode)->cache without looking at
its refcount, while files opened in merged mode still use it.
ovl_copy_up_workdir() publishes the upper dentry before it sets
OVL_WHITEOUTS, and ovl_dir_open() samples both without a lock, so an
open between the two stores finds the upper directory and takes it
for a real one.
With a delay between the two stores, an unprivileged process that
listed a directory during its copy-up saw only "." and "..", and its
next getdents freed the readdir cache of another descriptor.
Fix this by setting OVL_WHITEOUTS before ovl_inode_update(), so that
ovl_dir_reset() agrees with ovl_dir_open(), and by testing
OVL_TYPE_MERGE() of the path type in ovl_dir_open(), so that an open
that observes the upper dentry never iterates a merge dir as a real
dir, regardless of the order in which it observes the flag.
[amir: test OVL_TYPE_MERGE() instead of smp_rmb() in ovl_dir_open()] |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: Ensure registered is cleared in error path
If rc_register_device() fails, ensure that registered is not set to true.
If lirc_register() succeeded, then userspace could have an open file
descriptor open. This leads to a use-after-free.
lirc_unregister() must be called with registered = false, else there is a
possibility that an fd is open and polling, which would never return
POLLERR unless registered is false.
Note that registered must be changed under dev->lock, many functions
read registered under lock (e.g. lirc_ioctl). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: serialize access to DH-HMAC-CHAP state to fix UAF
A REPLY AUTH_SEND command can derive a dhchap_skey key while a
concurrent AUTH_RECEIVE command observing this REPLY state executes
the failure path and frees that key. The REPLY command then continues
and writes into freed memory, causing a use-after-free. KASAN reports
it as:
BUG: KASAN: slab-use-after-free in __sha256_final
Write of size 4 at addr ffff88800359c540
...
nvmet_auth_sq_free (drivers/nvme/target/auth.c:237)
nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:621)
Add a mutex to each submission queue to serialize authentication
commands and timeout handling. Unlock the mutex before completing
requests and ignore outdated timeout callbacks. Limit timeout delays
to prevent immediate expiry on 32-bit kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: flush deferred unmaps before dropping a failed folio
collapse_file() can fail its reference-count or dirty-folio check after
unmapping with TTU_BATCH_FLUSH. Both paths put back the isolated folio,
then unlock it and drop the lookup reference before reaching the common
try_to_unmap_flush().
The page-cache reference does not keep the folio stable once the lock is
released. Another collapse can replace and free it. With its PTEs
already gone, that collapse cannot flush the first task's per-task TLB
batch, and retract_page_tables() skips short or unaligned VMAs. A CPU can
therefore retain a user translation to the freed folio. This has been
reproduced with unprivileged MADV_COLLAPSE on a memfd.
Flush at out_unlock while the lookup reference and folio lock are still
held. The common flush continues to cover the accumulated pagelist on
both success and rollback, preserving batching on successful collapses. |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 missing authorization in the Kubernetes integration allowed project viewers to use stored credentials |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible |
| A flaw was found in gdm. The CreateRemoteDisplay D-Bus method fails to perform proper authorization checks when initiating a remote display session. A local attacker with access to the login screen environment can invoke this method with an arbitrary username to bypass standard automatic login verification checks. This vulnerability allows the attacker to achieve privilege escalation and start an unauthorized session as any user on the system, including root. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix protected RX frame validation in decrypt path
The RX software decrypt path mishandles crafted protected frames from a
malicious AP in two ways:
1) decryptor() never checks that a protected frame is long enough to
hold the 802.11 header plus the per-cipher trailer. All of
rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute
length = hdr.len - hdrlen - iv_len;
and act on the result, and recvframe_chkmic() similarly computes
datalen = hdr.len - hdrlen - iv_len - icv_len - 8;
for TKIP (the 8-byte Michael MIC is not accounted for in icv_len).
A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows
these unsigned subtractions, turning into a ~4 GiB iteration count in
aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le()
length, causing out-of-bounds reads/writes of up to ~4 GiB starting from
the rx skb. Reject such frames in decryptor() before touching the IV;
this covers all three ciphers and the TKIP MIC check, and also keeps the
unconditional iv[3] access within the frame.
2) validate_80211w_mgmt() keeps using the frame - two memcpys through
the stale rx_data pointer and a pkt_len update - before checking
whether decryptor() returned NULL. On decrypt failure (e.g. a unicast
protected deauth/disassoc/action frame with a bad MIC, which this path
always software-decrypts) the skb has already been freed, so this is a
use-after-free read/write, and the caller's error path frees the frame
a second time, drifting free_recvframe_cnt. Bail out immediately when
decryptor() fails, freeing the temporary mgmt_DATA buffer first.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown.
A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution.
This issue affects PHP versions 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: hold MP_JOIN msk ref when cloning reqsk
TCP request migration clones pending request sockets with
inet_reqsk_clone(). For MPTCP MP_JOIN requests this byte-copies
subflow_req->msk, but the clone does not own a reference.
The original and cloned requests can consequently drop the same msk
reference, leaving one request with a dangling pointer. This manifests as
a KASAN slab-use-after-free in subflow_req_destructor():
BUG: KASAN: slab-use-after-free in subflow_req_destructor (net/mptcp/subflow.c:45)
Write of size 4 at addr ff1100010e008d40 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5-00353-gc27e36054537 #10 PREEMPT(full)
Call Trace:
subflow_req_destructor (net/mptcp/subflow.c:45)
subflow_v4_req_destructor (net/mptcp/subflow.c:694)
__reqsk_free (net/ipv4/inet_connection_sock.c:906)
reqsk_timer_handler (include/net/request_sock.h:137 net/ipv4/inet_connection_sock.c:1147)
Allocated by task 10014:
sk_prot_alloc (net/core/sock.c:2246)
sk_clone (net/core/sock.c:2488)
mptcp_sk_clone_init (include/net/sock.h:1848 net/mptcp/protocol.c:3564)
subflow_syn_recv_sock (net/mptcp/subflow.c:883)
tcp_check_req (net/ipv4/tcp_minisocks.c:934)
Freed by task 0:
slab_free_after_rcu_debug (include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6439)
rcu_core (kernel/rcu/tree.c:2645 kernel/rcu/tree.c:2897)
Last potentially related work creation:
kmem_cache_free (mm/slub.c:2638 mm/slub.c:6377 mm/slub.c:6504)
__sk_destruct (net/core/sock.c:2289 net/core/sock.c:2391)
sk_destruct (net/core/sock.c:2419)
__sk_free (net/core/sock.c:2430)
sk_free (net/core/sock.c:2441)
mptcp_close (include/net/sock.h:2020 net/mptcp/protocol.c:3399)
inet_release (net/ipv4/af_inet.c:442)
The buggy address belongs to the cache MPTCP of size 2968
The buggy address is 128 bytes inside a freed 2968-byte region
A non-NULL subflow_req->msk means that the request owns one reference. The
third ACK can concurrently transfer the original request reference to the
child and release it, so taking an unconditional hold on the copied pointer
is unsafe.
MPTCP sockets use SLAB_TYPESAFE_BY_RCU and all current inet_reqsk_clone()
callers run in an RCU read-side critical section. Document and
lockdep-check that calling-context requirement. Read the pointer from the
original request and acquire a reference only if it is still live. Use
refcount_inc_not_zero_acquire() so the subsequent ownership validation
cannot be reordered before the try-get, then re-read the original request
to verify that it still owns the same msk. If either check fails, clear the
clone pointer; otherwise its normal destructor balances the new reference.
Mark the ownership-transfer store with WRITE_ONCE() to match the lockless
reads.
The following patch completes the clone fixup for MP_CAPABLE token
ownership. Both patches carry the same Fixes tag and are required for
stable backports. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/truncate: look up the end-edge straddler by index
In truncate_inode_partial_folio(), after the first split at the start
edge, folio_split() unlocks and drops the refcount of the after-split
sub-folios. The sub-folio straddling the end of the truncation range is
therefore unlocked and only transiently ref'd in the page cache while the
code still derives it from a page pointer inside the original folio.
Between the first split finishing and page_folio() resolving split_at2,
that tail page can be reclaimed, freed and reallocated as a new large
folio in the same mapping at a different file offset. folio2 then points
at a folio that does not cover the end boundary, yet folio2->mapping ==
folio->mapping still holds, so the stale pointer passes the mapping check
and folio_split_or_unmap() splits a folio at a wrong position (or, with a
transient refcount, a use-after-free window opens between try_get and the
split). __folio_split()'s own folio != page_folio(split_at) check cannot
catch this either since split_at2 has been reallocated as part of the new
folio, so page_folio(split_at2) resolves back to folio2.
Look the straddler up by its page index instead. __filemap_get_folio()
returns the folio currently covering the boundary, ref'd and locked, with
the mapping validated under the lock, so the split target is always the
real folio at the end edge. |