| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: set OVL_WHITEOUTS before publishing the upper dir
Listing a directory while it is copied up causes a use-after-free of
the readdir cache.
A merge directory must never be iterated as a real upper directory:
that mode frees the cache in OVL_I(inode)->cache without looking at
its refcount, while files opened in merged mode still use it.
ovl_copy_up_workdir() publishes the upper dentry before it sets
OVL_WHITEOUTS, and ovl_dir_open() samples both without a lock, so an
open between the two stores finds the upper directory and takes it
for a real one.
With a delay between the two stores, an unprivileged process that
listed a directory during its copy-up saw only "." and "..", and its
next getdents freed the readdir cache of another descriptor.
Fix this by setting OVL_WHITEOUTS before ovl_inode_update(), so that
ovl_dir_reset() agrees with ovl_dir_open(), and by testing
OVL_TYPE_MERGE() of the path type in ovl_dir_open(), so that an open
that observes the upper dentry never iterates a merge dir as a real
dir, regardless of the order in which it observes the flag.
[amir: test OVL_TYPE_MERGE() instead of smp_rmb() in ovl_dir_open()] |
| In the Linux kernel, the following vulnerability has been resolved:
media: rc: Ensure registered is cleared in error path
If rc_register_device() fails, ensure that registered is not set to true.
If lirc_register() succeeded, then userspace could have an open file
descriptor open. This leads to a use-after-free.
lirc_unregister() must be called with registered = false, else there is a
possibility that an fd is open and polling, which would never return
POLLERR unless registered is false.
Note that registered must be changed under dev->lock, many functions
read registered under lock (e.g. lirc_ioctl). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: serialize access to DH-HMAC-CHAP state to fix UAF
A REPLY AUTH_SEND command can derive a dhchap_skey key while a
concurrent AUTH_RECEIVE command observing this REPLY state executes
the failure path and frees that key. The REPLY command then continues
and writes into freed memory, causing a use-after-free. KASAN reports
it as:
BUG: KASAN: slab-use-after-free in __sha256_final
Write of size 4 at addr ffff88800359c540
...
nvmet_auth_sq_free (drivers/nvme/target/auth.c:237)
nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:621)
Add a mutex to each submission queue to serialize authentication
commands and timeout handling. Unlock the mutex before completing
requests and ignore outdated timeout callbacks. Limit timeout delays
to prevent immediate expiry on 32-bit kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/khugepaged: flush deferred unmaps before dropping a failed folio
collapse_file() can fail its reference-count or dirty-folio check after
unmapping with TTU_BATCH_FLUSH. Both paths put back the isolated folio,
then unlock it and drop the lookup reference before reaching the common
try_to_unmap_flush().
The page-cache reference does not keep the folio stable once the lock is
released. Another collapse can replace and free it. With its PTEs
already gone, that collapse cannot flush the first task's per-task TLB
batch, and retract_page_tables() skips short or unaligned VMAs. A CPU can
therefore retain a user translation to the freed folio. This has been
reproduced with unprivileged MADV_COLLAPSE on a memfd.
Flush at out_unlock while the lookup reference and folio lock are still
held. The common flush continues to cover the accumulated pagelist on
both success and rollback, preserving batching on successful collapses. |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 missing authorization in the Kubernetes integration allowed project viewers to use stored credentials |
| In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible |
| A flaw was found in gdm. The CreateRemoteDisplay D-Bus method fails to perform proper authorization checks when initiating a remote display session. A local attacker with access to the login screen environment can invoke this method with an arbitrary username to bypass standard automatic login verification checks. This vulnerability allows the attacker to achieve privilege escalation and start an unauthorized session as any user on the system, including root. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix protected RX frame validation in decrypt path
The RX software decrypt path mishandles crafted protected frames from a
malicious AP in two ways:
1) decryptor() never checks that a protected frame is long enough to
hold the 802.11 header plus the per-cipher trailer. All of
rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute
length = hdr.len - hdrlen - iv_len;
and act on the result, and recvframe_chkmic() similarly computes
datalen = hdr.len - hdrlen - iv_len - icv_len - 8;
for TKIP (the 8-byte Michael MIC is not accounted for in icv_len).
A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows
these unsigned subtractions, turning into a ~4 GiB iteration count in
aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le()
length, causing out-of-bounds reads/writes of up to ~4 GiB starting from
the rx skb. Reject such frames in decryptor() before touching the IV;
this covers all three ciphers and the TKIP MIC check, and also keeps the
unconditional iv[3] access within the frame.
2) validate_80211w_mgmt() keeps using the frame - two memcpys through
the stale rx_data pointer and a pkt_len update - before checking
whether decryptor() returned NULL. On decrypt failure (e.g. a unicast
protected deauth/disassoc/action frame with a bad MIC, which this path
always software-decrypts) the skb has already been freed, so this is a
use-after-free read/write, and the caller's error path frees the frame
a second time, drifting free_recvframe_cnt. Bail out immediately when
decryptor() fails, freeing the temporary mgmt_DATA buffer first.
Discovered by Atuin - Automated Vulnerability Discovery Engine. |
| Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown.
A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution.
This issue affects PHP versions 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: hold MP_JOIN msk ref when cloning reqsk
TCP request migration clones pending request sockets with
inet_reqsk_clone(). For MPTCP MP_JOIN requests this byte-copies
subflow_req->msk, but the clone does not own a reference.
The original and cloned requests can consequently drop the same msk
reference, leaving one request with a dangling pointer. This manifests as
a KASAN slab-use-after-free in subflow_req_destructor():
BUG: KASAN: slab-use-after-free in subflow_req_destructor (net/mptcp/subflow.c:45)
Write of size 4 at addr ff1100010e008d40 by task swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5-00353-gc27e36054537 #10 PREEMPT(full)
Call Trace:
subflow_req_destructor (net/mptcp/subflow.c:45)
subflow_v4_req_destructor (net/mptcp/subflow.c:694)
__reqsk_free (net/ipv4/inet_connection_sock.c:906)
reqsk_timer_handler (include/net/request_sock.h:137 net/ipv4/inet_connection_sock.c:1147)
Allocated by task 10014:
sk_prot_alloc (net/core/sock.c:2246)
sk_clone (net/core/sock.c:2488)
mptcp_sk_clone_init (include/net/sock.h:1848 net/mptcp/protocol.c:3564)
subflow_syn_recv_sock (net/mptcp/subflow.c:883)
tcp_check_req (net/ipv4/tcp_minisocks.c:934)
Freed by task 0:
slab_free_after_rcu_debug (include/linux/kasan.h:235 mm/slub.c:2677 mm/slub.c:6439)
rcu_core (kernel/rcu/tree.c:2645 kernel/rcu/tree.c:2897)
Last potentially related work creation:
kmem_cache_free (mm/slub.c:2638 mm/slub.c:6377 mm/slub.c:6504)
__sk_destruct (net/core/sock.c:2289 net/core/sock.c:2391)
sk_destruct (net/core/sock.c:2419)
__sk_free (net/core/sock.c:2430)
sk_free (net/core/sock.c:2441)
mptcp_close (include/net/sock.h:2020 net/mptcp/protocol.c:3399)
inet_release (net/ipv4/af_inet.c:442)
The buggy address belongs to the cache MPTCP of size 2968
The buggy address is 128 bytes inside a freed 2968-byte region
A non-NULL subflow_req->msk means that the request owns one reference. The
third ACK can concurrently transfer the original request reference to the
child and release it, so taking an unconditional hold on the copied pointer
is unsafe.
MPTCP sockets use SLAB_TYPESAFE_BY_RCU and all current inet_reqsk_clone()
callers run in an RCU read-side critical section. Document and
lockdep-check that calling-context requirement. Read the pointer from the
original request and acquire a reference only if it is still live. Use
refcount_inc_not_zero_acquire() so the subsequent ownership validation
cannot be reordered before the try-get, then re-read the original request
to verify that it still owns the same msk. If either check fails, clear the
clone pointer; otherwise its normal destructor balances the new reference.
Mark the ownership-transfer store with WRITE_ONCE() to match the lockless
reads.
The following patch completes the clone fixup for MP_CAPABLE token
ownership. Both patches carry the same Fixes tag and are required for
stable backports. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/truncate: look up the end-edge straddler by index
In truncate_inode_partial_folio(), after the first split at the start
edge, folio_split() unlocks and drops the refcount of the after-split
sub-folios. The sub-folio straddling the end of the truncation range is
therefore unlocked and only transiently ref'd in the page cache while the
code still derives it from a page pointer inside the original folio.
Between the first split finishing and page_folio() resolving split_at2,
that tail page can be reclaimed, freed and reallocated as a new large
folio in the same mapping at a different file offset. folio2 then points
at a folio that does not cover the end boundary, yet folio2->mapping ==
folio->mapping still holds, so the stale pointer passes the mapping check
and folio_split_or_unmap() splits a folio at a wrong position (or, with a
transient refcount, a use-after-free window opens between try_get and the
split). __folio_split()'s own folio != page_folio(split_at) check cannot
catch this either since split_at2 has been reallocated as part of the new
folio, so page_folio(split_at2) resolves back to folio2.
Look the straddler up by its page index instead. __filemap_get_folio()
returns the folio currently covering the boundary, ref'd and locked, with
the mapping validated under the lock, so the split target is always the
real folio at the end edge. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: don't discard lazyfree THPs at PMD level
__discard_anon_folio_pmd_locked() clears a lazyfree THP's PMD before it
determines whether the folio can be discarded, and restores it if the
folio is dirty or has extra references. It is done under only the PMD
lock and the anon_vma read lock inside try_to_unmap_one() and no mmap lock
is held. The temporarily none PMD causes UAF.
A parallel munmap() or mremap() is supposed to serialize with it on the
PMD lock, but zap_pmd_range() (called by munmap()) and move_page_tables()
(called by mremap()) do not take the lock when they see the temporarily
none PMD and skip the PMD. There is no more page table walk after the
none PMD is restored:
- munmap(): free_pgtables() waits in unlink_anon_vmas() for the anon_vma
lock, then free_pmd_range() drops the restored PMD as bad without
removing the rmap, so the folio keeps a stale mapcount.
- whole-VMA MREMAP_DONTUNMAP: dontunmap_complete() unlinks the source VMA
from its anon_vma while the restored PMD still maps the folio.
- plain mremap(): the THP is not moved but unmapped, so the THP's data is
lost.
In the first two cases, the folio stays mapped, but no VMA that maps it is
linked to its anon_vma. When the anon_vma is freed, it is still reachable
when one rmap walks the folio. Racing lazyfree reclaim against
MREMAP_DONTUNMAP as an unprivileged user reproduces a KASAN use-after-free
in folio_lock_anon_vma_read() as reported in the Closes link.
One solution is to use an invalidated PMD instead of a cleared one until
the discard is committed, but it needs arch fixes first.
1. GUP-fast still follows an invalidated PMD on riscv, LoongArch and s390.
2. sparc64 miscounts thp_pte_count when an invalidated PMD is set again or
cleared.
To keep the fix simple for backport, stop discarding lazyfree THPs at PMD
level instead. try_to_unmap_one() splits the PMD and discards the folio at
PTE level.
unmap_huge_pmd_locked() and __discard_anon_folio_pmd_locked() are left in
place, unused, to minimize this fix for backport and the invalidated PMD
approach is planned as a follow-up series to use them again. |
| PHP-CGI out-of-bounds read and write during PATH_INFO correction.
The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| Session serializer mismatch can lead to remote code execution.
Session upload progress, when enabled, can store attacker-controlled data in a session key using the php_binary or php_serialize session serializer. If the same session is later read with the php serializer, because session.serialize_handler is changed at runtime or differs between applications sharing a session store, bytes inside the key can be passed to the unserializer. A remote attacker able to submit a multipart upload can inject objects, which may lead to code execution when the reading application contains a suitable gadget chain, or to session corruption or denial of service.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| PHAR OpenSSL signature bypass via algorithm downgrade.
The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: Add SRCU protection for virtual-mode HPT hcalls
The virtual-mode HPT hcall handlers (H_ENTER, H_REMOVE, H_BULK_REMOVE,
H_CLEAR_REF, H_CLEAR_MOD) call into book3s_hv_rm_mmu.c, which accesses
memslots via kvm_memslots_raw(). kvm_memslots_raw() uses
rcu_dereference_raw_check() to bypass SRCU lockdep annotation checking.
This is safe in real mode because the entire guest entry/exit is wrapped
in srcu_read_lock/unlock inside kvmppc_run_core() and
kvmhv_run_single_vcpu().
However, since commit 6165d5dd99db ("KVM: PPC: Book3S HV: add virtual
mode handlers for HPT hcalls and page faults"), these same handlers are
also executed in virtual mode via kvmppc_pseries_do_hcall(), which runs
after SRCU has already been released on guest exit.
A concurrent KVM_SET_USER_MEMORY_REGION deletion or move can therefore
call synchronize_srcu_expedited() — which does not wait for this thread —
and then kfree(slot) and vfree(slot->arch.rmap) while the hcall handler
still holds a raw pointer to the memslot. lock_rmap() then writes to
freed vmalloc memory, leading to use-after-free and memory corruption.
Because kvm_memslots_raw() suppresses lockdep checks, this race is
entirely silent.
Fix this by factoring out the 7 HPT hcall handlers (H_REMOVE, H_ENTER,
H_READ, H_CLEAR_MOD, H_CLEAR_REF, H_PROTECT, H_BULK_REMOVE) into a
helper function, kvmppc_pseries_do_hpt_hcall(), and wrapping its call
site in srcu_read_lock(&kvm->srcu) / srcu_read_unlock(&kvm->srcu, idx).
Targeting only the HPT hcalls avoids wrapping non-HPT hcalls that sleep
(such as H_CONFER, H_REGISTER_VPA, H_PAGE_INIT) or handlers that already
acquire SRCU internally (such as H_RTAS). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Gracefully handle xarray errors when binding a memslot
If inserting a memslot into a guest_memfd's bindings xarray fails,
propagate the error back to the caller, i.e. fail memslot creation as well.
Signalling success and continuing on with memslot creation results in
use-after-free, as the guest_memfd instance will remain reachable via the
memslot after the file is freed (kvm_gmem_release() won't nullify the file
pointer due to lack of a valid binding).
Opportunistically WARN and reject binding if KVM_MEMSLOT_GMEM_ONLY is
already set, partly to guard against goofs elsewhere, but mostly so that
KVM doesn't need to worry about clobbering flags when unwinding on failure.
Regarding the unwind, the slot must be fully prepared before inserting it
into the bindings, at which point the slot becomes reachable. I.e. waiting
to update the slot in order to avoid the ugly unwind isn't an option. And
as part of the unwind, explicitly nullify the relevant bindings, as xarray
can store a subset of entries when populating a range. |
| Use-after-free in magic method backtraces can lead to remote code execution.
When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this.
This issue affects PHP versions 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: Set S_VERITY only after rollback is no longer possible
Commit f77f281b6118 ("fsverity: use a hashtable to find the
fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to
make concurrent reads start going through fsverity verification slightly
earlier than they did before.
Instead of it happening when enable_verity() calls fsverity_set_info(),
it now happens when ->end_enable_verity() sets S_VERITY.
However, ext4 and btrfs can roll back verity after they set S_VERITY,
causing a use-after-free.
Fix that by making ext4 and btrfs set S_VERITY only after rollback is no
longer possible. On failure, don't roll back S_VERITY, but do roll back
the filesystem-specific verity flag.
Also update enable_verity() to handle any future instances of this bug
more safely by warning and *not* freeing the fsverity_info.
Finally, tweak some comments. Clarify one, and move information from
another to its proper place in the comment for ->end_enable_verity(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: pin mm_users in do_pagemap_scan()
The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from
/proc/<pid>/pagemap without holding a reference to mm_users.
proc_mem_open() deliberately grabs only mm_count, so a consumer that
touches the address space has to call mmget_not_zero() first. Every other
consumer in this file does -- m_start(), do_procmap_query(),
show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not.
Without that reference the target can reach exit_mmap() concurrently, and
exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading,
which does not exclude the scanner. For ordinary VMAs this is harmless,
as free_pgtables() and remove_vma() run afterwards under mmap_write_lock.
A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's
hugetlb_vma_lock inside the read-locked phase.
walk_hugetlb_range() can therefore load vma->vm_private_data, have the
lock freed underneath it, and then down_read() a freed rw_semaphore. The
load happens before the freeing side clears the pointer, so this is a
use-after-free and not a NULL dereference. Any unprivileged user can
reach it with no huge pages configured, as hugetlb_reserve_pages()
allocates the lock before the VM_NORESERVE early return.
Pin mm_users across the scan, the way the other consumers do. mmput()
from the exiting task can then no longer reach exit_mmap() while a walk is
in progress.
[akpm@linux-foundation.org: remove unneeded & undesirable test for !mm] |