Search Results (112803 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-132239 1 Jetbrains 1 Teamcity 2026-11-20 7.6 High
In JetBrains TeamCity before 2026.1.3, 2025.11.7 missing authorization in the Kubernetes integration allowed project viewers to use stored credentials
CVE-2026-132241 1 Jetbrains 1 Teamcity 2026-11-20 7.3 High
In JetBrains TeamCity before 2026.1.3, 2025.11.7 XXE in the .NET build steps auto-discovery was possible
CVE-2026-132858 1 Redhat 2 Enterprise Linux, Rhel Els 2026-11-20 7.8 High
A flaw was found in gdm. The CreateRemoteDisplay D-Bus method fails to perform proper authorization checks when initiating a remote display session. A local attacker with access to the login screen environment can invoke this method with an arbitrary username to bypass standard automatic login verification checks. This vulnerability allows the attacker to achieve privilege escalation and start an unauthorized session as any user on the system, including root.
CVE-2026-99454 1 Linux 2 Linux, Linux Kernel 2026-11-20 8.8 High
In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix protected RX frame validation in decrypt path The RX software decrypt path mishandles crafted protected frames from a malicious AP in two ways: 1) decryptor() never checks that a protected frame is long enough to hold the 802.11 header plus the per-cipher trailer. All of rtw_wep_decrypt(), rtw_tkip_decrypt() and rtw_aes_decrypt() compute length = hdr.len - hdrlen - iv_len; and act on the result, and recvframe_chkmic() similarly computes datalen = hdr.len - hdrlen - iv_len - icv_len - 8; for TKIP (the 8-byte Michael MIC is not accounted for in icv_len). A frame shorter than hdrlen + iv_len + icv_len (+ 8 for TKIP) underflows these unsigned subtractions, turning into a ~4 GiB iteration count in aes_decipher()/arc4_crypt()/rtw_seccalctkipmic() or a ~4 GiB crc32_le() length, causing out-of-bounds reads/writes of up to ~4 GiB starting from the rx skb. Reject such frames in decryptor() before touching the IV; this covers all three ciphers and the TKIP MIC check, and also keeps the unconditional iv[3] access within the frame. 2) validate_80211w_mgmt() keeps using the frame - two memcpys through the stale rx_data pointer and a pkt_len update - before checking whether decryptor() returned NULL. On decrypt failure (e.g. a unicast protected deauth/disassoc/action frame with a bad MIC, which this path always software-decrypts) the skb has already been freed, so this is a use-after-free read/write, and the caller's error path frees the frame a second time, drifting free_recvframe_cnt. Bail out immediately when decryptor() fails, freeing the temporary mgmt_DATA buffer first. Discovered by Atuin - Automated Vulnerability Discovery Engine.
CVE-2026-129182 2 Php, Php Group 2 Php, Php 2026-11-20 8.1 High
Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown. A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution. This issue affects PHP versions 8.5.* before 8.5.13.
CVE-2026-99463 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mm/rmap: don't discard lazyfree THPs at PMD level __discard_anon_folio_pmd_locked() clears a lazyfree THP's PMD before it determines whether the folio can be discarded, and restores it if the folio is dirty or has extra references. It is done under only the PMD lock and the anon_vma read lock inside try_to_unmap_one() and no mmap lock is held. The temporarily none PMD causes UAF. A parallel munmap() or mremap() is supposed to serialize with it on the PMD lock, but zap_pmd_range() (called by munmap()) and move_page_tables() (called by mremap()) do not take the lock when they see the temporarily none PMD and skip the PMD. There is no more page table walk after the none PMD is restored: - munmap(): free_pgtables() waits in unlink_anon_vmas() for the anon_vma lock, then free_pmd_range() drops the restored PMD as bad without removing the rmap, so the folio keeps a stale mapcount. - whole-VMA MREMAP_DONTUNMAP: dontunmap_complete() unlinks the source VMA from its anon_vma while the restored PMD still maps the folio. - plain mremap(): the THP is not moved but unmapped, so the THP's data is lost. In the first two cases, the folio stays mapped, but no VMA that maps it is linked to its anon_vma. When the anon_vma is freed, it is still reachable when one rmap walks the folio. Racing lazyfree reclaim against MREMAP_DONTUNMAP as an unprivileged user reproduces a KASAN use-after-free in folio_lock_anon_vma_read() as reported in the Closes link. One solution is to use an invalidated PMD instead of a cleared one until the discard is committed, but it needs arch fixes first. 1. GUP-fast still follows an invalidated PMD on riscv, LoongArch and s390. 2. sparc64 miscounts thp_pte_count when an invalidated PMD is set again or cleared. To keep the fix simple for backport, stop discarding lazyfree THPs at PMD level instead. try_to_unmap_one() splits the PMD and discards the folio at PTE level. unmap_huge_pmd_locked() and __discard_anon_folio_pmd_locked() are left in place, unused, to minimize this fix for backport and the invalidated PMD approach is planned as a follow-up series to use them again.
CVE-2026-129538 2 Php, Php Group 2 Php, Php 2026-11-20 8.1 High
PHP-CGI out-of-bounds read and write during PATH_INFO correction. The PHP CGI binary (php-cgi), in CGI and FastCGI mode with cgi.fix_pathinfo enabled (the default), can perform an out-of-bounds read and write when the path removed from SCRIPT_FILENAME or PATH_TRANSLATED is longer than the supplied PATH_INFO, or when PATH_INFO is empty. This requires a web server mapping that passes such inconsistent values, or a FastCGI listener reachable by untrusted clients. An unauthenticated remote attacker can crash the process, may obtain process memory if the application exposes PATH_INFO or PATH_TRANSLATED, and may corrupt memory. PHP-FPM and the Apache module are not affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-128090 2 Php, Php Group 2 Php, Php 2026-11-20 7.1 High
PHAR OpenSSL signature bypass via algorithm downgrade. The Phar extension selects the signature verification method from the signature type stored in the archive, and only the OpenSSL types consult the separate .pubkey file holding the trusted public key. An attacker who can modify an OpenSSL-signed Phar archive, but not its public key file, can switch the signature type to a keyless hash such as SHA-256 with a recomputed digest, so the altered archive passes verification even with phar.require_hash enabled. An application that loads the archive may then execute attacker-controlled PHP code. Native, tar-based and zip-based phars are affected. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-99476 1 Linux 2 Linux, Linux Kernel 2026-11-20 7 High
In the Linux kernel, the following vulnerability has been resolved: fsverity: Set S_VERITY only after rollback is no longer possible Commit f77f281b6118 ("fsverity: use a hashtable to find the fsverity_info") changed the implementation of FS_IOC_ENABLE_VERITY to make concurrent reads start going through fsverity verification slightly earlier than they did before. Instead of it happening when enable_verity() calls fsverity_set_info(), it now happens when ->end_enable_verity() sets S_VERITY. However, ext4 and btrfs can roll back verity after they set S_VERITY, causing a use-after-free. Fix that by making ext4 and btrfs set S_VERITY only after rollback is no longer possible. On failure, don't roll back S_VERITY, but do roll back the filesystem-specific verity flag. Also update enable_verity() to handle any future instances of this bug more safely by warning and *not* freeing the fsverity_info. Finally, tweak some comments. Clarify one, and move information from another to its proper place in the comment for ->end_enable_verity().
CVE-2026-99477 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: pin mm_users in do_pagemap_scan() The PAGEMAP_SCAN ioctl takes mmap_read_lock() on an mm obtained from /proc/<pid>/pagemap without holding a reference to mm_users. proc_mem_open() deliberately grabs only mm_count, so a consumer that touches the address space has to call mmget_not_zero() first. Every other consumer in this file does -- m_start(), do_procmap_query(), show_smaps_rollup() and pagemap_read() -- but do_pagemap_scan() does not. Without that reference the target can reach exit_mmap() concurrently, and exit_mmap() calls unmap_vmas() while holding mmap_lock only for reading, which does not exclude the scanner. For ordinary VMAs this is harmless, as free_pgtables() and remove_vma() run afterwards under mmap_write_lock. A shared hugetlb VMA is different: __hugetlb_zap_end() frees the VMA's hugetlb_vma_lock inside the read-locked phase. walk_hugetlb_range() can therefore load vma->vm_private_data, have the lock freed underneath it, and then down_read() a freed rw_semaphore. The load happens before the freeing side clears the pointer, so this is a use-after-free and not a NULL dereference. Any unprivileged user can reach it with no huge pages configured, as hugetlb_reserve_pages() allocates the lock before the VM_NORESERVE early return. Pin mm_users across the scan, the way the other consumers do. mmput() from the exiting task can then no longer reach exit_mmap() while a walk is in progress. [akpm@linux-foundation.org: remove unneeded & undesirable test for !mm]
CVE-2026-99480 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix TOCTOU race between GROUP_REGISTERED check and erase panthor_group_destroy() checks the GROUP_REGISTERED mark and then calls xa_erase() without holding the xarray lock across both. If the handle is destroyed by another thread in between, and a concurrent GROUP_CREATE reuses the freed ID, the first destroy erases and releases the new, still-initializing group, leading to a use-after-free in panthor_group_create(). Do the mark check and erase atomically under xa_lock().
CVE-2026-131018 1 Google 1 Chrome 2026-11-20 8.1 High
Confused deputy in DevTools in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low)
CVE-2026-132610 1 Sourcecodester 1 Simple Form Builder Web App 2026-11-20 7.3 High
A security flaw has been discovered in SourceCodester Simple Form Builder Web App 1.0. The impacted element is the function save_form of the file /classes/Forms.php. Performing a manipulation of the argument form_code/form_data results in code injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.
CVE-2026-132625 1 Sourcecodester 1 Student Project Allocation And Management System 2026-11-20 7.3 High
A vulnerability was determined in SourceCodester Student Project Allocation and Management System 1.0. Affected is an unknown function of the file /login.php of the component Login Handler. Executing a manipulation of the argument username/password can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.
CVE-2026-132128 2026-11-20 7.4 High
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions up to and including 9.3.6, middie does not honor the router's caseSensitive setting and matches path-scoped middleware mount paths with a case-insensitive regular expression that does not fold non-ASCII characters, while Fastify's router, when caseSensitive is set to false, lowercases the request path with a Unicode-aware conversion that maps the KELVIN SIGN character (U+212A) to the ASCII letter k. A request that spells a k in a protected mount path as the percent-encoded KELVIN SIGN is therefore routed to the protected handler while the middleware mounted on that path, such as authentication, authorization, or rate limiting, never matches and is skipped, letting an unauthenticated client reach the handler. Only applications that set caseSensitive to false and protect a mount path containing the letter k are affected. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, or keep routing case-sensitive, which is the default.
CVE-2026-99490 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.0 High
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_bamboo_pad wacom_bamboo_pad_pen_event() accesses wacom->shared->pen locklessly relative to wacom_remove_shared_data() which nullifies it. This can lead to a Use-After-Free if the sibling device is removed while events are being processed. Resolve this by introducing RCU protection for pen and touch pointers: - Annotate 'pen' and 'touch' in wacom_shared struct with __rcu. - Wrap lockless readers in wacom_bamboo_pad_pen_event() with rcu_read_lock() and rcu_dereference(). - Update writers in wacom_sys.c using rcu_assign_pointer(). - Use rcu_dereference_protected for comparisons under wacom_udev_list_lock. - Also use rcu_access_pointer in wacom_sibling_pending() and wacom_mode_change_work() to avoid warnings (while lockless access in the latter remains a pre-existing issue).
CVE-2026-99491 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.0 High
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix Use-After-Free in wacom_intuos_pad wacom_intuos_pad() accesses wacom->shared->touch_input locklessly inside the interrupt handler context. If the Touch sibling device is disconnected, wacom_remove_shared_data() clears 'touch_input' outside any lock, creating a Time-of-Check to Time-of-Use (TOCTOU) race condition where a preempted reader in interrupt context dereferences the freed pointer, leading to a Use-After-Free. Resolve this by introducing RCU protection for the touch_input pointer: - Annotate 'touch_input' in wacom_shared struct with __rcu - Wrap all lockless readers in wacom_wac.c with guard(rcu)() and rcu_dereference() using a unified wacom_report_touch_mute() helper - Update writers in wacom_sys.c using rcu_assign_pointer() - Call synchronize_rcu() in wacom_remove_shared_data() to ensure all active RCU readers have finished before the input device is freed Also wrap wacom_set_shared_values() and touch/pen assignments in wacom_add_shared_data() inside the wacom_udev_list_lock to serialize concurrent probe assignments, and verify that 'shared->touch == hdev' before setting touch_input to prevent concurrent sibling probe state desynchronization.
CVE-2026-129481 2 Php, Php Group 2 Php, Php 2026-11-20 8.1 High
Use-after-free after interrupted session shutdown. The session extension records the filename of the executing script when a session starts. If a fatal error occurs in an application callback while the session variables are destroyed at shutdown, such as stream_close() of a user-defined stream wrapper, the pointer is retained after the request memory is freed, and a later request handled by the same worker can free the stale string. An attacker who can trigger such a failing cleanup may crash the worker or corrupt memory; code execution has not been demonstrated. This requires the filename to be allocated in request memory, for example when the script is not cached by OPcache. This issue affects PHP versions 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-129496 2 Php, Php Group 2 Php, Php 2026-11-20 8.1 High
Timezone cache use-after-free can lead to remote code execution. In non-thread-safe builds, a diagnostic written to a file-based error_log during module startup, for example for an invalid date.timezone value or a session configuration warning, causes the timezone cache to be allocated in startup memory that is freed while a reference to it is kept. A diagnostic raised early in the first request of a worker, such as the max_input_vars warning, then accesses the freed cache. On such a deployment an unauthenticated remote attacker can crash PHP-FPM, Apache mod_php or CGI workers with a crafted request. Arbitrary code execution may be possible and has been demonstrated with known memory addresses. This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.
CVE-2026-129291 2 Php, Php Group 2 Php, Php 2026-11-20 7.0 High
PHP-FPM epoll use-after-free can lead to local privilege escalation. When catch_workers_output is enabled and the epoll event backend is used, the PHP-FPM master can close a worker's output pipe in fpm_child_close() without removing the associated event, and the delayed cleanup can free the worker record while its epoll registration is still active. A later event is then dispatched through a pointer into freed memory. A local attacker who can execute PHP code in an FPM worker can crash the master or execute code with its privileges, commonly root. catch_workers_output is disabled by default but enabled in the official PHP-FPM Docker images. This issue affects PHP versions from 8.1.20 through 8.1.34, from 8.2.7 before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13.