Search Results (566 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-71832 1 Aria 1 Aria 2026-08-29 6.2 Medium
Aria2 version 1.37.0 and below is affected by a Divide By Zero issue in src/bittorrent_helper.cc, which allows a remote malicious user to cause a Denial of Service
CVE-2026-75466 1 Libjpeg-turbo 1 Libjpeg-turbo 2026-08-28 6.5 Medium
libjpeg-turbo 3.2.0 contains an integer division-by-zero vulnerability in the PNG loader. When processing a valid indexed-color PNG image with a non-gray palette through tj3LoadImage12() or tj3LoadImage16() using the default pixel format, the application may trigger a division-by-zero in alloc_sarray(), causing a SIGFPE and denial of service.
CVE-2026-80610 1 Linux 1 Linux Kernel 2026-08-28 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: enetc: fix potential divide-by-zero when num_vsi is zero For i.MX94 series, all the standalone ENETCs do not support SR-IOV, so pf->caps.num_vsi is zero. This leads to a divide-by-zero in enetc4_default_rings_allocation() when distributing rings among PF and VFs. Division by zero is undefined behavior in C. On ARM64, the UDIV/SDIV instructions silently return zero rather than raising an exception, so the issue does not cause a visible crash. However, relying on this behavior is incorrect and poses a cross-platform compatibility risk. Add an explicit check for num_vsi == 0 and return early after the PF's rings have been configured.
CVE-2026-74643 1 Linux 1 Linux Kernel 2026-08-22 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: error out for zero quota goal target values Patch series "mm/damon: avoid division by zero from damos_quota_score()". DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division by zero in damos_quota_score(). Avoid it by adding parameters validation checks. This patch (of 2): damos_quota_score() can trigger division by zero if the target_value is zero. DAMON_SAMPLE_MTIER lets users set the target_value via node0_mem_{used,free}_bp parameters. It doesn't guard zero value case, though. As a result, users can trigger division by zero. Fix the issue by returning an error when the user tries to start DAMON with zero node0_mem_{used,free}_bp parameter values. DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite bad. Also the zero node0_mem_free_bp parameter might look like a reasonable setup to some users. Hence, the issue might really happen in the real world. One reliable way to reproduce the issue is like below: # cd /sys/module/damon_sample_mtier/parameters # echo 4096 > node0_start_addr # echo 8192 > node0_end_addr # echo 8192 > node1_start_addr # echo 81920 > node1_end_addr # echo 0 > node0_mem_free_bp # echo Y > enabled # dmesg -w [...] [18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI [...] [18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480 [...] This issue was discovered [1] by Sashiko.
CVE-2026-74645 1 Linux 1 Linux Kernel 2026-08-22 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: error out for >10000 active_mem_bp damos_quota_score() can trigger division by zero if the target value is zero. DAMON_LRU_SORT lets users set the target value for the hot memory scheme via active_mem_bp parameter. It avoids setting it as the target value if the parameter value is zero. However, it also sets the cold memory scheme with a target value that is calculated as '10000 - active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold memory scheme's quota goal target value can be zero. As a result, division by zero can be triggered. Fix by returning an error when the user tries to start DAMON with >10000 active_mem_bp parameter value. It makes no sense to set active_mem_bp with 10002. It also requires module parameters write permission to reproduce the issue. That said, the consequence is quite bad. One reliable way to reproduce the issue is like below: # cd /sys/module/damon_lru_sort/parameters # echo 1000 > wmarks_high # echo 995 > wmarks_mid # echo 0 > wmarks_low # echo 10002 > active_mem_bp # echo Y > enabled # dmesg -w [...] [ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI [ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480 This issue was discovered [1] by Sashiko.
CVE-2026-1653 1 Lenovo 1 Smart Connect 2026-08-20 5.5 Medium
A potential divide by zero vulnerability was reported in the Lenovo Virtual Bus driver used in Smart Connect that could allow a local authenticated user to cause a Windows blue screen error.
CVE-2026-16897 1 Ibm 3 Aix, Powervm Vios, Vios 2026-08-20 4.4 Medium
IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to cause a denial of service due to an out-of-bounds write.
CVE-2026-20057 1 Cisco 5 Cisco Utd Snort Ips Engine Software, Cyber Vision, Secure Firewall Threat Defense and 2 more 2026-08-20 5.8 Medium
Multiple Cisco products are affected by a vulnerability in the Snort 3 Visual Basic for Applications (VBA) feature which could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to crash.    This vulnerability is due to lack of proper error checking when decompressing VBA data. An attacker could exploit this vulnerability by sending a crafted VBA data to the Snort 3 Detection Engine on the targeted device. A successful exploit could allow the attacker to cause the Snort 3 Detection Engine to unexpectedly restart causing a a denial of service (DoS) condition.
CVE-2026-74504 1 Linux 1 Linux Kernel 2026-08-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix division by zero in initialize_timer() A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set the backing snd_timer's hardware resolution to an arbitrary 64-bit value via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero. When such a timer is bound to a sequencer queue, initialize_timer() computes the tick period as tmr->ticks = 1000000000 / (r * freq); where r is that user-controlled resolution and freq is the sequencer update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250). A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for any even freq, including DEFAULT_FREQUENCY (1000), so the division faults with a divide-by-zero. The division runs under tmr->lock with interrupts disabled, so the oops leaves the spinlock held and hangs the CPU. It is reachable by an unprivileged user with access to /dev/snd/timer and /dev/snd/seq. Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+ RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0 snd_seq_timer_start+0x15e/0x2b0 snd_seq_control_queue+0x56f/0xba0 snd_seq_write+0x3e0/0x730 Reject an overflowing product with check_mul_overflow() and fall back to a single tick, which also avoids feeding a wrapped-but-nonzero divisor (e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small value) into the period computation.
CVE-2026-72414 1 Linux 1 Linux Kernel 2026-08-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: round up PTP perout pin duration pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time().
CVE-2026-72394 1 Linux 1 Linux Kernel 2026-08-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero Sashiko reports: In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function calculates the fan RPM using the tachometer value. However, it does not check if the tachometer value is zero before performing the division. If the hardware reports a tachometer value of 0 (which can happen due to an extremely fast pulse, a stuck edge, or a hardware glitch), the calculated tach_div evaluates to 0. The subsequent call to do_div() with tach_div as the divisor triggers a divide-by-zero exception, leading to a kernel panic. Check the divisor against zero to fix the problem.
CVE-2026-72238 1 Linux 1 Linux Kernel 2026-08-17 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang.
CVE-2026-45889 1 Linux 1 Linux Kernel 2026-08-13 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mptcp: do not account for OoO in mptcp_rcvbuf_grow() MPTCP-level OoOs are physiological when multiple subflows are active concurrently and will not cause retransmissions nor are caused by drops. Accounting for them in mptcp_rcvbuf_grow() causes the rcvbuf slowly drifting towards tcp_rmem[2]. Remove such accounting. Note that subflows will still account for TCP-level OoO when the MPTCP-level rcvbuf is propagated. This also closes a subtle and very unlikely race condition with rcvspace init; active sockets with user-space holding the msk-level socket lock, could complete such initialization in the receive callback, after that the first OoO data reaches the rcvbuf and potentially triggering a divide by zero Oops.
CVE-2026-7007 1 Zephyrproject 1 Zephyr 2026-08-12 4.6 Medium
The Zephyr ext2 file system validates the on-disk superblock in ext2_verify_disk_superblock() (subsys/fs/ext2/ext2_impl.c) before completing a mount. The validator checked the magic number, block size, revision and feature flags, but did not verify that the on-disk fields s_blocks_per_group and s_inodes_per_group are non-zero. Both fields are read directly from the image and are later used as divisors during mount-time initialization. During mount, get_ngroups() divides and modulos s_blocks_count by s_blocks_per_group (reached via ext2_fetch_block_group() from ext2_init_fs()), and get_itable_entry() divides (ino - 1) by s_inodes_per_group when fetching the root inode (both in subsys/fs/ext2/ext2_diskops.c). A superblock with either field set to zero therefore causes an integer division by zero during the mount sequence. An attacker who can present a crafted ext2 image to a device that mounts ext2 — removable media such as an SD card or a USB mass-storage device — can trigger this. On ARMv7-M / ARMv8-M-mainline Cortex-M targets, divide-by-zero trapping is enabled (SCB_CCR_DIV_0_TRP), so the division raises a UsageFault that Zephyr treats as a fatal error, producing a denial of service. The impact is limited to availability; the malformed value is consumed only as a divisor. The fix rejects a zero s_blocks_per_group or s_inodes_per_group in the superblock validator, returning -EINVAL so the mount fails before any block-group or inode I/O occurs.
CVE-2026-64236 1 Linux 1 Linux Kernel 2026-08-12 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: i2c: davinci: fix division by zero on missing clock-frequency When the 'clock-frequency' property is missing from the device tree, the driver falls back to DAVINCI_I2C_DEFAULT_BUS_FREQ. However, this macro was defined in kHz (100), whereas the device tree property is expected in Hz. The probe function divided the fallback value by 1000, causing integer truncation that resulted in dev->bus_freq = 0. This triggered a deterministic division-by-zero kernel panic when calculating clock dividers later in the probe sequence. Fix this by redefining DAVINCI_I2C_DEFAULT_BUS_FREQ in Hz (100000) to match the expected device tree property unit, allowing the existing division logic to work correctly for both cases.
CVE-2026-64951 1 Rapid7 1 Velociraptor 2026-08-12 3.5 Low
A rogue Velociraptor client can upload a malformed sparse file such that if the GUI attempts to expand the file, a panic occurs which may crash the server process. The problem is a Divide by Zero bug in the ShouldPadFile() function.
CVE-2026-17535 1 Rapid7 1 Velociraptor 2026-08-11 6.2 Medium
Velociraptor's NTFS parsing library mishandles several out of bound and memory exhaustion bugs which may be triggered by maliciously crafted NTFS images. Typically Velociraptor's NTFS parser is used on live NTFS filesystems, limiting the opportunity of attackers corrupting the filesystem. However, in some applications (e.g.  dead disk forensics https://docs.velociraptor.app/docs/forensic/deaddisk/ ) Velociraptor may be used on untrusted NTFS image files.  If an attacker is able to inject maliciously corrupted NTFS Volumes they can cause a crash and a Denial of Service.
CVE-2026-68356 1 Linux 1 Linux Kernel 2026-08-11 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: watchdog: airoha: Prevent division by zero when clock frequency is zero clk_get_rate() can return 0 when the clock provider is not properly configured or the clock is unmanaged. The driver uses wdt_freq as a divisor directly in airoha_wdt_probe() to compute max_timeout and in airoha_wdt_get_timeleft() to compute the remaining time, which results in a division by zero. Add a check for wdt_freq == 0 in probe and return -EINVAL with dev_err_probe() to prevent the division by zero and provide a diagnostic message.
CVE-2026-19025 1 Hdfgroup 1 Hdf5 2026-08-07 5.0 Medium
H5O__layout_decode in H5Olayout.c in HDF5 through 2.3.0 does not validate that a chunked dataset's stored chunk-layout dimensionality matches its dataspace rank when an existing dataset is opened, whereas this check is performed only at dataset-creation time. This allows attackers to cause a denial of service (divide-by-zero and application crash in H5S__hyper_iter_get_seq_list in src/H5Shyper.c) via a crafted HDF5 file with mismatched chunk/dataspace ranks that is opened and read via H5Dopen2 and H5Dread, e.g. by the h5repack tool.
CVE-2022-49670 1 Linux 1 Linux Kernel 2026-08-05 7.5 High
In the Linux kernel, the following vulnerability has been resolved: linux/dim: Fix divide by 0 in RDMA DIM Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio == 0. CallTrace: Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020 task: ffff880194b78000 task.stack: ffffc90006714000 RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202 RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09 R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880c10e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ib_poll_handler+0x43/0x80 [ib_core] irq_poll_softirq+0xae/0x110 __do_softirq+0xd1/0x28c irq_exit+0xde/0xf0 do_IRQ+0x54/0xe0 common_interrupt+0x8f/0x8f </IRQ> ? cpuidle_enter_state+0xd9/0x2a0 ? cpuidle_enter_state+0xc7/0x2a0 ? do_idle+0x170/0x1d0 ? cpu_startup_entry+0x6f/0x80 ? start_secondary+0x1b9/0x210 ? secondary_startup_64+0xa5/0xb0 Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0