Search Results (358 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-79983 1 Apache 2 Apache Camel, Camel 2026-11-03 7.4 High
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Camel FTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The Camel remote-file consumers poll a directory on a remote server and build the absolute remote path of each file by concatenating the configured directory with the file name reported in the server's directory listing. That concatenation (FtpUtils.absoluteFilePath and GenericFileConsumer) applied no lexical normalization and no check that the result stayed inside the directory being polled, and the resulting path became the operand for every subsequent remote operation on the file: retrieval (FtpOperations.retrieveFile / SftpOperations, reached from GenericFileConsumer where the retrieve name is taken verbatim from GenericFile.getAbsoluteFilePath), deletion when delete=true (GenericFileDeleteProcessStrategy), and renaming when move, preMove, moveFailed or readLock=rename is configured (GenericFileProcessStrategySupport and GenericFileRenameExclusiveReadLockStrategy). Neither isValidFile nor isMatched performed any containment check. A listing entry that is not a single path segment therefore resolved to a path outside the configured polling directory, causing Camel to read, delete or rename files outside it using the endpoint's own credentials. A listing name is not route-controlled data. It is supplied by the remote server, and the FTP control channel carries no integrity protection at all, so an on-path attacker can rewrite a LIST response without holding any credentials; a compromised, malicious or multi-tenant server, or a server backed by a virtual filesystem, can emit such a name directly. Retrieval is reachable in a default consumer configuration, since the remote consumers download every listed file; deletion and renaming additionally require one of the disposition options above, all of which are common. Escape from the directory Camel was configured to poll is unconditional, while escape from the server's own account boundary additionally depends on whether that server confines the account. The jailStartingDirectory option, which is documented as restricting Camel to the starting directory and is enabled by default, governed producer writes and, since the localWorkDirectory containment work, consumer downloads to the local work directory - but it did not constrain this remote operand, so its name and description claimed a boundary that was not enforced here. The same entry point had already been recognised on the local side: the localWorkDirectory download path was constrained so that a remote file name containing parent-directory segments could not resolve outside the local work directory. The remote operand was the remaining half of that surface. This artifact provides the ftp, ftps and sftp schemes, all of which are affected. The reporter demonstrated the issue end to end against an ftp endpoint, driving a Camel route with a malicious server whose LIST response named a file outside the polled directory. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. The 4.14.x stream reached end of life and does not receive this fix; users on it should move to a supported releases stream.
CVE-2026-80343 1 Apache 2 Apache Camel, Camel 2026-11-03 8.2 High
Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.
CVE-2026-80344 1 Apache 2 Apache Camel, Camel 2026-11-03 8.2 High
Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners.
CVE-2026-84176 1 Apache 2 Apache Camel, Camel 2026-11-03 6.5 Medium
Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset.
CVE-2026-95664 1 Apache 2 Apache Camel, Camel 2026-11-02 5.4 Medium
Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume.
CVE-2026-68482 2 Apache, Apache Software Foundation 2 Answer, Apache Answer 2026-10-30 5.3 Medium
Missing Authorization vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. An unauthenticated or unauthorized user can retrieve the invited-user list associated with a non-public question due to missing visibility authorization checks. Users are recommended to upgrade to version 2.0.3, which fixes the issue.
CVE-2026-86589 2 Apache, Apache Software Foundation 2 Answer, Apache Answer 2026-10-30 5.4 Medium
Incorrect implementation of authentication algorithm vulnerability in Apache Answer. This issue affects Apache Answer: through 2.0.2. A flaw in the User Center login integration can cause a newly created external user session to omit its external identity, allowing subsequent requests to bypass central account suspension or deletion checks until the session expires or is revoked. Users are recommended to upgrade to version 2.0.3, which fixes the issue.
CVE-2026-108780 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 6.5 Medium
Potential JDBC source configuration validation vulnerability in Apache Kylin. The impact is minor, unless the kylin backend services are open to public network. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-108776 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 5.3 Medium
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Apache Kylin. The impact is moderate if kylin service is in query only mode, which is the default and most common mode. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-108771 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 9.8 Critical
Missing authentication for in-house broadcast and polymorphic deserialization vulnerability in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-108766 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 6.5 Medium
Missing authorization on jdbc source config update in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-108764 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 6.5 Medium
Server-Side request forgery (SSRF) vulnerability in Apache Kylin. Impact most to the kylin job service that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-108762 2 Apache, Apache Software Foundation 2 Apache Kylin, Apache Kylin 2026-10-30 7.3 High
Path-confinement bypass during metadata backup deletion in Apache Kylin. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4.0.0 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue.
CVE-2026-93446 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-29 7.5 High
Incomplete cleanup vulnerability in Apache Tomcat could cause TLS 1.3 connections to fail intermittently. This issue affects Apache Tomcat: from 11.0.0-M21 through 11.0.26, from 10.1.25 through 10.1.60, from 9.0.90 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.
CVE-2026-88041 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-29 7.5 High
Incomplete cleanup vulnerability in Apache Tomcat allowed an trailer information from a previous request to leak into a subsequent request. This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.26, from 10.1.27 through 10.1.60, from 9.0.92 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.
CVE-2026-80353 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-29 8.1 High
Time-of-check time-of-use (TOCTOU) race condition vulnerability in Apache Tomcat when creating unix domain sockets for the APR/Native connector allows an unauthorised local user to access the unix domain socket. The fix for CVE-2026-65183 only addressed the NIO connector. It did not address the same issue in the APR/Native connector. This issue affects Apache Tomcat: from 9.0.47 through 9.0.122. Users are recommended to upgrade to version 9.0.123, which fixes the issue.
CVE-2026-74049 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-29 6.1 Medium
Execution After Redirect (EAR) vulnerability in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue.
CVE-2026-74048 3 Apache, Apache Software Foundation, Redhat 4 Apache Tomcat, Tomcat, Tomcat and 1 more 2026-10-29 6.5 Medium
Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration. This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122. Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue.
CVE-2026-71569 1 Apache 2 Apache Camel, Camel 2026-10-29 4.8 Medium
Server-Side Request Forgery (SSRF) vulnerability in Apache Camel A2A component. This issue affects Apache Camel: from 4.21.0 before 4.22.2. WebhookUrlValidator classified a push notification webhook host in two places that did not agree. A host written as an IP literal was matched against a list of string prefixes that named the IPv6 unique local range fc00::/7, while a host reached through a name was resolved and the resulting address classified with the InetAddress predicates isLoopbackAddress, isAnyLocalAddress, isLinkLocalAddress and isSiteLocalAddress. Those predicates do not cover the same ground as the prefix list: isSiteLocalAddress reports the deprecated fec0::/10 block and not the fc00::/7 unique local addresses that replaced it, and the JDK carries no predicate for them at all. The same address was therefore accepted or rejected depending on how it was written, and a webhook URL whose host name resolved into fc00::/7 passed a guard that refused the identical address given as a literal. PushNotificationDispatcher then sent the push notification to that address, together with any Authorization header carried in the same configuration, whose scheme and credentials the registering caller supplies. The webhook URL arrives as TaskPushNotificationConfig.url from the caller registering the push notification, so it is attacker-controlled, and allowLocalWebhookUrls is false by default, which is the configuration in which the guard is expected to hold. The response is not relayed back to the caller who registered the configuration, so what the gap yields is a blind outbound HTTPS request from the Camel process to an internal address the guard was written to refuse; reaching a service that way additionally requires that the name resolve into fc00::/7 in the target environment, that an HTTPS service be listening on that address, and that the TLS handshake succeed for the name being requested, which is why the severity is assessed medium. The same string pre-check was also wrong in the other direction: it matched the raw host string without first establishing that the host was an IP literal, so any name merely beginning with fc or fd, such as fcm.googleapis.com, was refused outright. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.21.x release line reached end of life before this issue was resolved and will not receive a fix, so deployments on it must move to a supported release. Both the literal and the resolved path now classify the address from its raw bytes with one shared classifier, which recognises fc00::/7 and the shared address space 100.64.0.0/10, as well as IPv4-compatible, NAT64 (64:ff9b::/96) and 6to4 (2002::/16) addresses whose embedded IPv4 address is not globally routable. For deployments that cannot upgrade immediately, place authentication in front of the A2A push notification configuration path so that the webhook URL does not arrive from an untrusted caller, and deny egress from the Camel process to fc00::/7 at the network level; where the deployment has no need of IPv6, starting the JVM with -Djava.net.preferIPv4Stack=true removes the address class the gap turns on. Note that allowLocalWebhookUrls=false is already the default and does not by itself close the gap.
CVE-2025-55702 2 Apache, Apache Software Foundation 3 Apache Traffic Server, Traffic Server, Apache Traffic Server 2026-10-28 8.7 High
When a client sends a POST with Expect: 100-continue and the origin answers before reading the body, Apache Traffic Server parses the unread body left on the client connection as the next request. An attacker behind a front-end proxy that shares connections to Traffic Server can use this to smuggle requests past the front end and desynchronize responses for other users. This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0. Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue.