Search Results (192 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-46187 1 Linux 1 Linux Kernel 2026-10-15 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix kthread lifetime race between self-exit and external-stop RSI driver use both self-exit(kthread_complete_and_exit) and external-stop (kthread_stop) when killing a kthread. Generally, kthread_stop() is called first, and in this case, no particular issues occur. However, in rare instances where kthread_complete_and_exit() is called first and then kthread_stop() is called, a UAF occurs because the kthread object, which has already exited and been freed, is accessed again. Therefore, to prevent this with minimal modification, you must remove kthread_stop() and change the code to wait until the self-exit operation is completed.
CVE-2022-1462 3 Debian, Linux, Redhat 5 Debian Linux, Linux Kernel, Enterprise Linux and 2 more 2026-10-14 6.3 Medium
An out-of-bounds read flaw was found in the Linux kernel’s TeleTYpe subsystem. The issue occurs in how a user triggers a race condition using ioctls TIOCSPTLCK and TIOCGPTPEER and TIOCSTI and TCXONC with leakage of memory in the flush_to_ldisc function. This flaw allows a local user to crash the system or read unauthorized random data from memory.
CVE-2026-98300 1 Linux 1 Linux Kernel 2026-10-11 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41 RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005 RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000 R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0 Call Trace: <TASK> __sk_destruct+0x82/0xae0 net/core/sock.c:2356 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622 run_ksoftirqd kernel/softirq.c:1076 [inline] run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068 smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160 kthread+0x396/0x4a0 kernel/kthread.c:436 ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>
CVE-2026-98337 1 Linux 1 Linux Kernel 2026-10-11 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan starts (which requires ROC list to be empty, but that's possible), and then a new ROC can be added to the list and the work will pick it up. Avoid starting that ROC if a scan made it between things, as otherwise we'll hit a warning later: WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0 Workqueue: events_unbound cfg80211_wiphy_work Call Trace: __ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537 ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513
CVE-2026-98338 1 Linux 1 Linux Kernel 2026-10-11 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ibss: ref BSS entry for joined event When the IBSS is joined, we only record the BSSID/channel in the event and look up the BSS entry when processing it. However, that's racy, e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a warning in the event work: !bss WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440 Workqueue: cfg80211 cfg80211_event_work cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144 cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179 cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393 Do the lookup early (the driver is expected to only join an IBSS that has a BSS entry) and keep a reference to it.
CVE-2026-98252 1 Linux 1 Linux Kernel 2026-10-11 7 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: fix refcount bug in iwpm_get_nlmsg_request() iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail() making it accessible to global list where another CPU can kref_get() on nlmsg_request causing a refcount "addition on 0" bug. Fix this by initializing kref _before_ list_add_tail() so refcount for nlmsg_request can be incremented/decremented normally. In addition, also initialize every field before list_add_tail().
CVE-2026-98359 1 Linux 1 Linux Kernel 2026-10-07 7 High
In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete.
CVE-2026-98251 1 Linux 1 Linux Kernel 2026-10-07 7.8 High
In the Linux kernel, the following vulnerability has been resolved: openvswitch: avoid reallocating confirmed conntrack labels ovs_ct_get_conn_labels() adds the labels extension when a conntrack entry does not have one. Confirmed conntracks can be read locklessly, so adding an extension may reallocate and free the extension block while another CPU accesses it. Only add the extension for unconfirmed conntracks. A confirmed conntrack without labels now fails the caller's label operation instead of reallocating its extension storage.
CVE-2026-98163 1 Linux 1 Linux Kernel 2026-10-07 7.8 High
In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L)
CVE-2026-86247 1 Apache 2 Apache Tomcat, Tomcat Native 2026-10-06 7.4 High
Race condition within a thread vulnerability in Apache Tomcat Native allowed client certificate verification requirements to be down-graded for some configurations. This issue affects Apache Tomcat Native: from 2.0.0 through 2.0.15, from 1.3.0 through 1.3.8. Unsupported versions may also be affected. Users are recommended to upgrade to version 2.0.16 or 1.3.9, which fixes the issue.
CVE-2026-98050 1 Linux 1 Linux Kernel 2026-10-06 7.5 High
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes netif_receive_skb(). This has not been accurate since the referenced commit; this patch makes that comment accurate again. mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX net_device without any conditions. The NAPI instance's poll, which may be running concurrent to the GC, is running as an independently-scheduled kthread which may be on a different CPU. The call to local_bh_disable() does not guard against this. If a tx-timestamp timeout produces an unmatched entry (which can be easily reproduced by running ptp4l and waiting for a port to reach the UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of a poll on another CPU, both sides mutate the GRO list concurrently, as shown below: [39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP PTI CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy) Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018 RIP: 0010:__list_add_valid_or_report+0x79/0xb0 RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246 RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540 RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003 R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0 Call Trace: <TASK> gro_receive_skb+0xee/0x230 mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum] mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core] mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci] __napi_poll+0x31/0x1e0 napi_threaded_poll_loop+0x16b/0x1c0 napi_threaded_poll+0x71/0xa0 kthread+0xfb/0x260 ret_from_fork+0x22d/0x260 ret_from_fork_asm+0x1a/0x30 </TASK> Kernel panic - not syncing: Fatal exception in interrupt The machinery that leads to this kernel panic has not been changed between 6.18.48 and mainline. This patch adds an ingress-delivery helper for the PTP packet_finish() path that calls netif_receive_skb() instead of napi_gro_receive(). netif_receive_skb(), unlike napi_gro_receive(), can be called from outside of the NAPI instance's poll context, which can occur at the call site for this path. RX stats accounting and the skb->dev assignment are still preserved; the only change is the delivery call itself. This removes GR ---truncated---
CVE-2026-93319 1 Moby 1 Buildkit 2026-10-05 4.7 Medium
A malicious external BuildKit frontend can send requests using the internal API that can create conditions for a data race that can cause the BuildKit daemon to panic.
CVE-2026-92042 1 Mozilla 2 Firefox, Thunderbird 2026-10-05 7.5 High
Race condition in the DOM: Content Processes component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3.
CVE-2026-97998 1 Linux 1 Linux Kernel 2026-10-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0
CVE-2026-97993 1 Linux 1 Linux Kernel 2026-10-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") added that clearing, and spelled out the invariant the rest of the file relies on: "we consider 'v->config_ctx' valid if it is not NULL". The window between the swap and the clearing still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config interrupt delivered inside the window hands the ERR_PTR to eventfd_signal(). Check the fd before installing it instead. That closes the window and matches how vhost_vring_ioctl() handles the same failure for the vq call fd. It also stops a rejected fd from tearing down a config interrupt that was working: until now the swap replaced the live context and put it, so after an EBADF the device silently stopped delivering config interrupts until userspace installed a new fd.
CVE-2026-93819 1 Linux 1 Linux Kernel 2026-10-03 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]
CVE-2026-93798 1 Linux 1 Linux Kernel 2026-10-03 7.8 High
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reloc root cleanup in merge_reloc_roots() If the root we got has zero root refs in its root item, we are resetting the root's ->reloc_root without using barriers like we do everywhere else. Sashiko complained about this while reviewing another patch, and it's correct (see the Link tag below). Also, we should not clear BTRFS_ROOT_DEAD_RELOC_TREE from the root unless the root points to the reloc root we have. Fix this by using clear_reloc_root(), which issues the memory barrier after setting the root's ->reloc_root to NULL and before clearing the bit BTRFS_ROOT_DEAD_RELOC_TREE from the root.
CVE-2026-98115 1 Linux 1 Linux Kernel 2026-10-02 8.8 High
In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely drain sessions during logoff SMB3 multichannel allows requests for one session to run on multiple connections. Wait for all channels bound to a session before freeing shared session objects. A deferred byte-range lock remains counted as a running request and only wakes when its file closes. Wake blocked locks during the drain without unpublishing or modifying their file objects. Synchronous CANCEL requests must invoke their cancellation callback to wake pending operations, while CHANGE_NOTIFY completion remains specific to the asynchronous path. Serialize session teardown with channel registration and previous-session cleanup, and use atomic work-state transitions so LOGOFF, CANCEL, and connection teardown invoke cancellation callbacks only once.
CVE-2026-93818 1 Linux 1 Linux Kernel 2026-10-01 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Protect root bus removal with rescan lock Hold the pci_rescan_remove_lock lock while stopping and removing a root bus to avoid racing with concurrent rescan or hotplug operations triggered via sysfs. Such races may lead to use-after-free issues or system crashes. [bhelgaas: commit log]
CVE-2026-97941 1 Linux 1 Linux Kernel 2026-10-01 7.8 High
In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely.