| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcmtest: handle multiple wraps in random capture fill
The random capture helpers assume that the data generated for one timer
tick wraps the DMA ring at most once. However, b_rw describes 200 ms of
audio because the timer runs at 5 Hz, so it can be several times larger
than a small ring.
For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA
ring is 4096 bytes while one tick generates 76800 bytes. After filling the
4096-byte tail, the existing code issues a second 72704-byte write from the
ring base, writing 68608 bytes beyond the ring. Both interleaved and
non-interleaved capture are affected.
KASAN reports the first write into the adjacent free page as a
use-after-free in the random-byte generator. The underlying defect is an
out-of-bounds write from the live DMA ring, not a stale DMA allocation.
Split each random write repeatedly at the interleaved ring or per-channel
block boundary. Keep the hardware-pointer update exactly once after the
complete logical write.
The issue reproduced on three of three clean boots. With this change, the
same vulnerable geometry completed six times without a sanitizer finding.
Boundary, pattern-fill, no-timer, open/close, and module-reload controls
also completed normally.
snd-pcmtest is a test driver, and selecting random fill requires an
administrator-controlled module parameter. The written values come from the
kernel random generator; no privilege escalation or attacker-controlled
write primitive was demonstrated. |
| Partially overwritten session files can lead to remote code execution.
The files session save handler, which is the default, writes updated session data into the existing session file without first clearing it. If a write is interrupted, the file can contain the beginning of the new session followed by the end of the old one, and bytes of an ordinary string can later be unserialized as objects. An attacker who can influence the session data, for example through session upload progress, and interrupt a write at a suitable point may inject objects, which can lead to code execution when the application contains a suitable gadget chain. Session data can also be corrupted.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: emux: Fix UAF of soundfont zones at note-on
snd_emux_note_on() looks up the matching zones via
snd_soundfont_search_zone(), which takes sflist->lock only during the
lookup and returns the raw zone pointers after releasing it. The
caller then stores them in vp->zone without any protection.
Meanwhile, a concurrent SNDRV_EMUX_IOCTL_REMOVE_LAST_SAMPLES ioctl may
unlink and free those zones in snd_soundfont_remove_unlocked(); this
leads to a use-after-free in snd_emux_note_on(), and later at
accessing the cached vp->zone, e.g. in snd_emux_send_effect().
Fix it by holding sflist->lock in snd_emux_note_on() over the whole
zone lookup and voice setup, and let snd_soundfont_search_zone()
require the caller to hold the lock, instead.
snd_soundfont_lock_preset() takes sflist->lock for setting
presets_locked, so the removal path now syncs with the note-on finish. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: clear the mailbox channel pointer when starting it fails
aie2_create_context() allocates a mailbox channel, starts it, and on a
failed start frees it again:
hwctx->priv->mbox_chann = xdna_mailbox_alloc_channel(ndev->mbox);
...
ret = xdna_mailbox_start_channel(hwctx->priv->mbox_chann, ...);
if (ret)
goto free_channel;
...
free_channel:
xdna_mailbox_free_channel(hwctx->priv->mbox_chann);
hwctx->priv->mbox_chann keeps pointing at the freed channel. That
pointer is the driver's own test for whether a hardware context has a
usable channel: aie2_destroy_context() returns early on NULL,
aie2_sched_job_run() refuses to run a job on NULL, and the message
helpers return -ENODEV on NULL. A stale pointer passes all of them.
It matters on the restart path. aie2_hwctx_restart() calls
aie2_create_context() again on a hardware context that is already live,
after aie2_hwctx_stop() has torn its channel down, and the context
survives a failure there: aie2_sched_job_timedout() discards the return
value entirely, and aie2_hwctx_resume() only propagates it. What is
left is a live hardware context holding a freed channel, and every
later user of it takes the non-NULL branch:
- the next job submitted reaches xdna_mailbox_send_msg() on the freed
channel, via the !mbox_chann guard in aie2_sched_job_run(),
- a second command timeout reaches aie2_hwctx_stop() ->
aie2_destroy_context(),
- closing the device reaches aie2_hwctx_fini() ->
aie2_release_resource() -> xrs_release_resource() ->
aie2_xrs_unload() -> aie2_destroy_context(),
and aie2_destroy_context() then calls xdna_mailbox_stop_channel()
followed by xdna_mailbox_free_channel() on memory that was already
freed: a use-after-free, and a second free of the same channel.
The AIE4 management channel already does this correctly -
aie4_mailbox_start() clears ndev->aie.mgmt_chann right after freeing
it. Do the same here.
The create path itself is not affected: when aie2_xrs_load() fails,
xrs_allocate_resource() removes the solver node without calling
->unload, and aie2_hwctx_init() frees hwctx->priv, so the stale pointer
never outlives the structure holding it.
Starting a channel can fail today without this patch: the ring buffer
sizes firmware reports are rejected unless both are powers of two, and
request_irq() can fail. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: configfs: fix data offset calculation for subsystem callbacks
`get_group_data()` chooses between `Group::<Parent>::container_of()` and
`Subsystem::<Parent>::container_of()` based on whether `this` represents
the root group of a configfs subsystem. It detects this by checking
`(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c`
unconditionally sets `cg_subsys` for every `config_group` attached anywhere
in a registered subsystem, including the subsystem's own `su_group`. The
only `config_group` with a NULL `cg_subsys` is the configfs root, on which
userspace cannot trigger callbacks. The check is therefore always false at
runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks
reach the `Group` branch and may read `data` at the wrong offset.
Thus change the `is_root` check to correctly identify whether a group is a
root group by comparing `this` to `subsys.su_group`.
[ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ] |
| In the Linux kernel, the following vulnerability has been resolved:
rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML
On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third
argument is a taint number, but `warn_on!` passes its bug flags there.
As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The
warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after
`warn_on!` fires, where it should be 512. It also causes an
out-of-bounds write in `add_taint()`.
Pass `TAINT_WARN` directly, as C does on UML. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: finish fault cleanup before dropping the fault lock
On a retried fault, a fatal signal interrupting the folio lock wait
makes lock_folio_maybe_drop_mmap() drop the fault lock without pinning
the file. However, filemap_fault() may still need to release
mapping->invalidate_lock. A concurrent munmap() can release the last
file reference and free the mapping before that unlock.
Defer dropping the fault lock to filemap_fault()'s retry cleanup, after
releasing invalidate_lock. If the fault lock was already dropped for
I/O, release the existing file reference instead. Keep the fault lock
held for FAULT_FLAG_RETRY_NOWAIT as before. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: don't lose a folio lock wakeup to a signal
An exclusive waiter in folio_wait_bit_common() can leave the wait loop
because of a fatal signal, then be woken by folio_unlock() before
finish_wait(). If the waker did not hand over the lock, the waiter returns
-EINTR without trying to acquire it.
folio_wake_bit() stops after waking the first exclusive waiter, so this
loses the wakeup and can leave other waiters asleep indefinitely on an
unlocked folio.
After finish_wait(), let a waiter woken without a lock handoff try once
more to acquire the lock. If successful, return success so the caller's
eventual unlock wakes the next waiter. Otherwise, the current lock owner
will do so.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: clarify and simplify comment + description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mglru: don't use stack pointers when walking PUD and PMD tables
MGLRU passes stack copies of page-table entries in walk_pud_range() and
walk_pmd_range() when walking to the next level. These copies can become
stale when khugepaged or MADV_DONTNEED (CONFIG_PT_RECLAIM) removes a PTE
table concurrently.
This pattern dates back to commit bd74fdaea146 ("mm: multi-gen LRU:
support page table walks"). Likely, earlier locking masked the latent
bug. Later changes exposed it: commit 1d65b771bc08 ("mm/khugepaged:
retract_page_tables() without mmap or vma lock") allowed concurrent
retraction, and commit cf4a65539c13 ("memcg-v1: no need for memcg locking
for MGLRU") dropped the walker's outer RCU protection.
The fix is simple, so just fix the original commit so we don't have to
speculate. To fix it, pass the actual PMD/PUD pointers. This restores the
RCU-protected lookup and validation against the live PMD. Note that the PUD
handling is required as well to handle folded page tables correctly in all
cases.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: handle walk_pud_range() as well, clarify+simplify description,
adjust Fixes: ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix truncate loop after boundary swapin failure
If swapping in a large entry at the new EOF fails, shmem_undo_range()
leaves the entry in place. Its final scan skips the entry, then restarts
from the same start index and finds it again. Truncation can loop forever
while holding i_rwsem.
Advance start past the skipped entry so that a restarted scan can finish,
as we already do for folios that cannot be split.
Note that this does not fix the missing zeroing when boundary swapin fails,
it merely prevents the endless loop. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: preserve allocation errors when swapping in large entries
shmem_swapin_folio() adjusts swap to the requested slot within a large
swap entry before allocating a folio. If allocation or charging fails,
the error path compares this adjusted value with the original entry
still stored in the XArray in shmem_confirm_swap().
Unless the index is at the start of the entry, this turns -ENOMEM into
-EEXIST even though nothing changed.
The caller retries -EEXIST, so persistent allocation failures can leave
the task spinning instead of returning the error.
Restore swap to index_entry on allocation failure so the existing error
path checks the original entry. This preserves the allocation error if
the entry is unchanged and still retries if it changed concurrently. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: stop retrying folios that cannot be split
A fault or collapse can insert a large folio crossing EOF after
shmem_undo_range() has handled the boundary folios. If splitting that
folio fails, truncate_inode_partial_folio() retains it when it is dirty.
The final scan then repeatedly finds it because it restarts from an
unchanged start.
Truncation keeps the inode lock and ignores fatal signals while looping.
A concurrent unlink() can then block other directory operations while
holding the directory lock and waiting for the file's lock.
Advance start past the retained folio, whose truncated part has already
been zeroed. Do not move start backwards if the failed split has shrunk
the folio.
Fix generated by an LLM and sent by Chris Mason in private.
[ david: split fixes, simplify descriptions, adjust comments ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: drop oversized RX frames instead of panicking
atl1c sizes its receive buffers from the netdev MTU plus a fixed set of L2
overheads, which comes to 1522 bytes at the default MTU. A link partner
that sends a longer frame - in practice a MikroTik CCR2004-1G-2XS-PCIe,
whose RouterOS side defaults to l2mtu 1600 while the host stays at MTU 1500
- makes the length reported by the RX return descriptor exceed what the
hardware wrote, and skb_put() then either includes bytes that were never
received or trips skb_over_panic and takes the host down.
Compare the descriptor length against buffer_info->length, the length the
hardware was given, rather than against skb_tailroom(): the skb carries 64
bytes of slack for the DMA erratum, so tailroom is larger than the DMA
buffer and a frame in between would pass the check and still be delivered
with a tail the device never wrote. The same test rejects frames shorter
than ETH_HLEN + ETH_FCS_LEN; before this change a reported length below
ETH_FCS_LEN underflowed in skb_put().
The frame is dropped with kfree_skb_reason(SKB_DROP_REASON_PKT_TOO_BIG) so
drop_monitor and the kfree_skb tracepoint see it, and counted through
dev_core_stats_rx_dropped_inc(), which survives atl1c_get_stats()
overwriting the hardware counters on every read. It also counts as work:
atl1c_clean_rfd() has already recycled the RFD, and the refill at the end
of the poll only runs when work_done is non-zero, so sustained oversized
traffic would otherwise drain the ring and stop RX.
Tested on a MikroTik CCR2004-1G-2XS-PCIe (4x AR8151) in a Proxmox VE host,
with atl1c built from a DKMS tree carrying this change: the l2mtu-1600
traffic that panics the stock driver is dropped and counted with the patch
applied, and received normally once the host MTU is raised to match.
This complements commit 36c2009d90f2 ("net: atl1c: fix soft lockup on
out-of-range tpd_cons read"), which fixed the TX side of the same
"host dies while the card resets" problem. |
| Confused deputy in DevTools in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low) |
| A vulnerability was identified in OpenZipkin Zipkin 3.6.1. This affects the function UnzippingBytesRequestConverter.convertRequest of the file zipkin-server/src/main/java/zipkin2/server/internal/ZipkinHttpCollector.java of the component HTTP Collector. Such manipulation leads to highly compressed data. The attack can be executed remotely. The pull request to fix this issue awaits acceptance. |
| Authentication Bypass Using an Alternate Path or Channel vulnerability in miniOrange miniorange otp verification miniorange-otp-verification allows Authentication Abuse.This issue affects miniorange otp verification: from n/a through 5.6.1. |
| Missing Authorization vulnerability in RomanCode MapSVG mapsvg-lite-interactive-vector-maps allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects MapSVG: from n/a through 9.0.5. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Elementor Elementor Website Builder elementor allows Reflected XSS.This issue affects Elementor Website Builder: from n/a through 4.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
klist: avoid accesses after waking klist_remove()
klist_remove() waits until a node is unreferenced so that its caller can
free the containing object. klist_release() currently publishes
waiter->woken and wakes the waiter before its final accesses to the waiter
and node. klist_remove() can then return, allowing its stack waiter and
the containing object to be freed or reused while klist_release() is still
running. In particular, bus_remove_driver() can free drv->p while
__device_attach() walks the same bus klist with bus_for_each_drv().
On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with
CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the
in-tree I2C/at24 path. KASAN reported a use-after-free in
klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while
at24 was being unregistered.
Clear n_klist and take a task reference before publishing woken. Use
release/acquire accesses for that publication and wake the referenced
task. The task reference keeps the waiter task alive if it returns and
exits before wake_up_process(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: Redesign shared sibling data lifecycle
The Wacom driver coordinates state between sibling interfaces of
the same physical device using a shared structure 'wacom_shared'
inside 'wacom_hdev_data'. The driver kept a volatile representative
pointer 'data->dev' pointing to a sibling 'hid_device' for physical
path comparisons during sibling matching.
This pointer management is fragile. When the representative device
is disconnected, wacom_remove_shared_data() failed to clear/update
'data->dev', leading to a Use-After-Free vulnerability when
subsequent sibling probes dereference the dangling 'data->dev'
pointer.
Resolve this issue by redesigning the sibling data lifecycle:
- Eliminate the volatile 'data->dev' representative pointer
completely
- Redesign 'wacom_hdev_data' to store stable static copies of the
required attributes upon first allocation: 'phys' path string,
'vendor', 'product' IDs and the sibling's 'device_type'
- Use these static attributes for stable sibling matching in
wacom_are_sibling() and wacom_get_hdev_data()
This ensures sibling matching remains safe and stable even if
individual siblings are dynamically added or removed.
To secure the lifecycle against concurrent probe/disconnect races:
- Switch kref_put() to kref_put_mutex() in
wacom_remove_shared_data() to serialize refcount drops with list
traversal and lookup
- Modify wacom_release_shared_data() to assume the list lock is
already held
Also, do not accumulate the 'device_type' capability flag during
subsequent sibling probes. Keeping only the first probed sibling's
device_type exactly preserves the original sibling matching behavior
without introducing side effects. |