Search Results (55981 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99370 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.4 Medium
In the Linux kernel, the following vulnerability has been resolved: NFSD: copy SETXATTR data from all XDR buffer segments nfsd4_vbuf_from_vector() manually copies the head followed by whole pages starting at offset zero. This assumes that all remaining data starts at the beginning of the page array and that no data is stored in the tail. However, nfsd4_decode_setxattr() passes an xdr_buf returned by xdr_stream_subsegment(). Such a sub-buffer can have a nonzero page_base and can span its page and tail segments. Ignoring that layout can copy the wrong bytes into the value passed to vfs_setxattr(). Use read_bytes_from_xdr_buf(), which observes the complete xdr_buf layout.
CVE-2026-99681 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: blk-mq: fix out-of-bounds read in blk_mq_free_rqs A KASAN slab-out-of-bounds read can occur in blk_mq_free_rqs() when there is a mismatch between the number of hardware queues allocated for the IO scheduler (et->nr_hw_queues) and the number of hardware queues in the block tag set (set->nr_hw_queues). This mismatch can happen if blk_mq_update_nr_hw_queues() fails halfway through (e.g., due to memory pressure during blk_mq_prealloc_tag_set_tags()). In this error path, the elevator is restored with a larger number of hardware queues than the block tag set actually has. When the elevator is later freed, blk_mq_free_sched_tags() iterates up to the new et->nr_hw_queues and calls blk_mq_free_rqs(). In blk_mq_free_rqs(), it attempts to access set->tags[hctx_idx] to get the driver tags. Because set->nr_hw_queues was not updated due to the earlier failure, set->tags still has the old (smaller) size, leading to an out-of-bounds read. BUG: KASAN: slab-out-of-bounds in blk_mq_free_rqs+0xde/0x680 Read of size 8 at addr ffff88818d67fc28 by task syz-executor117/5839 Call Trace: blk_mq_free_rqs+0xde/0x680 blk_mq_free_map_and_rqs+0x40/0xf0 blk_mq_free_sched_tags blk_mq_free_sched_res+0xeb/0x280 elevator_change_done+0x1d2/0x5c0 elevator_change+0x34f/0x480 elv_iosched_store+0x504/0x630 queue_attr_store+0x207/0x2b0 To fix this, explicitly check if hctx_idx < set->nr_hw_queues before accessing set->tags[hctx_idx]. If hctx_idx >= set->nr_hw_queues, the hardware queue doesn't exist in the tag set, meaning there are no driver tags to clear mappings from. In this case, safely set drv_tags to NULL. The subsequent call to blk_mq_clear_rq_mapping() already handles a NULL drv_tags pointer and will safely return.
CVE-2026-116443 1 Dell 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more 2026-11-20 9.8 Critical
Dell PowerStore SDNAS contains a stack-based buffer overflow in the NAS TFTP service that could allow an unauthenticated remote attacker to cause a denial of service or potential code execution.
CVE-2026-132959 1 Jetbrains 1 Teamcity 2026-11-20 5.9 Medium
In JetBrains TeamCity before 2026.2 remote code execution on build agents was possible via service message injection in build configuration names
CVE-2026-99379 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.3 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate SMB1 EA list bounds before parsing CIFSSMBQAllEAs() checks the server-provided EA list length by adding it to the response pointer. On 32-bit systems, a positive length can wrap the pointer and pass the comparison. The parser then walks outside the received response while reading the next FEA header. A response with a list length of 0x40000000 reproduces this as a native i386 page fault and kernel panic from listxattr() against an SMB1 server. Check that the EA list starts within the SMB byte area before reading its header. Keep its length unsigned and compare it with the bytes left in the response without pointer addition. SMB1 is not negotiated by default and requires an explicit vers=1.0 mount.
CVE-2026-99380 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: validate NT transaction response layout and offsets validate_ntransact() assumes that the response uses the fixed 18-word NT transaction layout. A different WordCount makes get_bcc() locate the byte count at a different offset from pSMBr->ByteCount, allowing the subsequent bounds checks to use inconsistent response boundaries. The function also turns the 32-bit ParameterOffset and DataOffset fields into pointers before checking their bounds. On a 32-bit client, a large offset can wrap the pointer below end_of_smb and pass the one-sided pointer comparison. The caller then dereferences the parameter pointer or copies from the data pointer. Require the expected WordCount before reading the byte count. Check each offset and count against the received SMB length as integers before forming either pointer. Use subtraction after validating the offset so that the range checks cannot overflow.
CVE-2026-99381 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.1 Low
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short or out-of-range FIND response parameters CIFSFindFirst() and CIFSFindNext() read the SearchHandle, SearchCount, EndofSearch and LastNameOffset of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response at ParameterOffset. validate_t2() bounds the offset at 1024 and ParameterCount below 512, and nothing compares them with the number of bytes SendReceive() copied into the buffer or with the size of the response parameters. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response with a ParameterOffset past its end has the search handle, the entry count, the end-of-search flag and the last-entry offset read out of the request that was just sent, or out of whatever the allocation held before, and a ParameterCount smaller than the parameters has them read past the end of the parameter block. The reads stay inside the allocation, but what they return is not part of the response, and CIFSFindFirst() then hands back a search handle the server never sent. That handle is sent back to the server in the next FIND_NEXT2 or FIND_CLOSE2, so two bytes of the buffer leak at an offset the server picks. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose parameter area is smaller than the response parameters or extends past the received length, returning smb_EIO2() with a new smb_eio_traces value for each of the two responses, like the other response checks this file gained since v6.19. Backports to trees before v6.19 need smb_EIO2() replaced with -EINVAL and the trace.h hunk dropped. A conforming server is not affected. The parameter block of a transaction response is part of the SMB, so ParameterOffset + ParameterCount cannot exceed the smbCalcSize() bytes that SendReceive() copies, and the response parameters are 10 bytes for FIND_FIRST2 and 8 bytes for FIND_NEXT2, which is what T2_FFIRST_RSP_PARMS and T2_FNEXT_RSP_PARMS hold. This patch depends on "smb: client: reject FIND data areas that run past the received response", whose declarations it extends.
CVE-2026-99382 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.1 Low
In the Linux kernel, the following vulnerability has been resolved: smb: client: reject FIND data areas that run past the received response CIFSFindFirst() and CIFSFindNext() take the directory entries of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response from DataOffset for DataCount bytes. validate_t2() bounds DataOffset at 1024 and ParameterCount + DataCount by the byte count, and nothing compares DataOffset + DataCount with the number of bytes SendReceive() copied into the buffer. smb_init() places the request and the response in the same cifs_request allocation and cifs_buf_get() clears only the start of it, so a short response whose data area extends past its end has srch_entries_start point at bytes of the request that was just sent, or at whatever the allocation held before, and those bytes are parsed as directory entries. cifs_readdir() and find_cifs_entry() walk the entries with nxt_dir_entry(), which checks every entry but the first of a response against the end of the SMB; cifs_query_path_info() and cifs_backup_query_path_info() read the first entry with no check at all. Those reads stay inside the allocation, but what they return is not part of the response. The last entry, which LastNameOffset locates relative to the data area, is bounded against the received response by an earlier patch of this series, as is every entry that cifs_fill_dirent() parses; the walk itself and the two query functions are not. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject a response whose data area extends past the received length, with the -EINVAL that validate_t2() returns for the other malformed transaction responses. cifs_query_path_info() and cifs_backup_query_path_info() still read a whole entry from a data area that may be smaller than one; that is not changed here. A conforming server is not affected. The data block of a transaction response is part of the SMB, so DataOffset + DataCount cannot exceed the smbCalcSize() bytes that SendReceive() copies; coalesce_t2() appends each secondary response to the data area and adds its length to both DataCount and the byte count, which keeps that relation.
CVE-2026-99384 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.5 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read of the resume name sent in TRANS2_FIND_NEXT2 cifs_fill_dirent() reads the fixed part of a directory entry and the name length it holds, or for SMB_FIND_FILE_UNIX scans the name for its terminating NUL, without knowing where the response ends. cifs_save_resume_key() calls it for the entry at the LastNameOffset the server chose, after every FindNext and after the FindFirst of a search rewind, and records the name it returns as the resume name of the search without bounding it; the next CIFSFindNext() copies up to PATH_MAX - 1 bytes from that name into its request and sends them to the server. cifs_filldir() bounds the name against the end of the response since commit f8cf09a53a0d ("smb: client: bound dirent name against end of SMB response in cifs_filldir"), but only after cifs_fill_dirent() has read the entry, and nxt_dir_entry() checks the entries it walks only against sizeof(FILE_DIRECTORY_INFO), for every level but SMB_FIND_FILE_INFO_STANDARD, and never sees the first entry of a response. Bounding where last_entry starts, as the preceding patch does, does not bound the read. A last entry that starts within the final bytes of the response still has its fixed part read past the end of the received data, and the name length it declares, a __le32 for every level but SMB_FIND_FILE_INFO_STANDARD and SMB_FIND_FILE_UNIX, is recorded without being checked against anything. CIFSFindNext() rejects only a length of PATH_MAX or more, then copies the name, up to 4095 bytes, into its request and sends it, and as the report below shows that copy can run past the end of the cifs_request allocation that holds the response. For SMB_FIND_FILE_UNIX the name is in addition scanned for its terminating NUL over up to PATH_MAX + 1 UTF-16 units, or PATH_MAX bytes, before any check. The FindNext that carries the name is only sent by the SMB1 dialect, which is not negotiated by default; reaching it requires an explicit vers=1.0 mount. With KASAN enabled, a response whose last entry declares a name longer than the bytes that follow it gives: ================================================================== BUG: KASAN: slab-out-of-bounds in CIFSFindNext+0x8ca/0x14c0 Read of size 4080 at addr ffff88807c823f98 by task ls/83 CPU: 0 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x23/0x60 CIFSFindNext+0x8ca/0x14c0 cifs_readdir+0xf51/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 1 at 13.497119s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807c820000 which belongs to the cache cifs_request of size 16588 The buggy address is located 16280 bytes inside of allocated 16588-byte region [ffff88807c820000, ffff88807c8240cc) ================================================================== The read is the memcpy() that copies the recorded name into the next request, so those bytes go to the server. Pass the end of the response to cifs_fill_dirent() and have it reject an entry whose fixed part does not fit or whose name extends past the end, before either is used, so that both callers are covered; cifs_save_resume_key() computes the end the same way cifs_readdir() does. The name bound compares the bytes left between the name and the end with the name length rather than adding the length to the name pointer, since the length is a 32-bit value taken from the entry and the sum could wrap on 32-bit systems. cifs_fill_dirent() is also used on the SMB2 readdir path; there smb2_parse_query_directory() has already checked every entry against the end of the response, so a vali ---truncated---
CVE-2026-99387 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.1 High
In the Linux kernel, the following vulnerability has been resolved: smb: client: bound POSIX lock data area by response length CIFSSMBPosixLock() receives a TRANS2 response whose server-provided DataOffset and DataCount are not required by validate_t2() to describe an interval inside the response. A server can therefore make the client read a cifs_posix_lock beyond the response buffer and return those kernel bytes through F_GETLK. Use smbCalcSize() to obtain the full response length after any multipart TRANS2 reassembly, then reject data areas that extend past it before dereferencing them.
CVE-2026-99392 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.4 Low
In the Linux kernel, the following vulnerability has been resolved: xfs: don't subtract excess usage twice when computing agf_btreeblks LOLLM noticed that the free space btree repair code calculates agf_btreeblks from the number of blocks we wrote to rebuild the free space btrees (minus the roots). That's correct. However, it observes that we subtract the "excess" reservation, which is not correct. Fix this accounting problem.
CVE-2026-99396 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: bound da-node entry count against the correct geometry xfs_da3_node_verify() bounds the node entry count against the larger of the directory and attribute geometries because, as a buffer verifier, it cannot tell whether the block belongs to the directory or the attribute tree. When the directory block size exceeds the fs block size (e.g. mkfs.xfs -n size=64k -b size=4k), an attribute node buffer is a single fs block that holds only m_attr_geo->node_ents entries, yet a crafted attr node may claim a count up to m_dir_geo->node_ents and still pass the verifier. xfs_da3_node_lookup_int() then indexes btree[] up to that count during its binary search -- an out-of-bounds read via getxattr/listxattr on a mounted crafted image. The buffer verifier is the wrong place to tighten this: it has no fork context, and the transaction-less read path used by getxattr does not run xfs_da3_node_set_type() either. xfs_da3_node_lookup_int(), on the other hand, always runs on that path and holds args->geo, the geometry of the fork actually being searched. Bound the entry count against args->geo->node_ents there, before walking the entries.
CVE-2026-99402 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: restrict checksum offsets to known values We need to prevent userspace from corrupting e.g. tcp->doff, because many locations in conntrack and conntrack helpers rely on nf_conntrack_in() having validated the packet headers. nft_payload allows to alter headers later which invalidates this assumption. The 'Fixes' commit restricts writes to safe fields, but there is another side channel: the checksum location. Restrict this too. Reported via sashiko/gemini.
CVE-2026-99403 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: mark overfull dabtree node blocks as corrupt LOLLM observes that we need to range-check the dabtree node record count before using it to index an array. Fix that.
CVE-2026-99754 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.1 High
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Verify the iSCSI ISID is null-terminated iscsi_parse_pr_out_transport_id() returns the ISID of a FORMAT CODE 01b TransportID as a pointer into the PERSISTENT RESERVE OUT parameter list, lowercased in place and never null-terminated. spc4r37 Table 508 requires the field to be null-terminated, but a non-conforming initiator can omit the NULL; when the ISID ends at the end of the received buffer, the pointer is not a C string. The registration code still consumes it as one: strcmp() in __core_scsi3_locate_pr_reg() and in the REGISTER AND MOVE path, and snprintf("%s") in __core_scsi3_do_alloc_registration(), which also reads its first 8 bytes unconditionally with get_unaligned_be64() - a NUL check does not bound that read. When the parameter list spans more than one page, transport_kmap_data_sg() maps it with vmap(), and the over-read walks off the end of the mapping into the vmalloc() guard page and oopses. Reproduced with a PR OUT REGISTER + SPEC_I_PT parameter list of exactly 8192 bytes whose final TransportID carries a 12-byte ISID without a terminating NUL: BUG: unable to handle page fault for address: ffffc9000138c000 RIP: 0010:strcmp+0xc/0x30 Call Trace: __core_scsi3_locate_pr_reg+0xd3/0x120 [target_core_mod] core_scsi3_decode_spec_i_port+0x8fc/0x13a0 [target_core_mod] core_scsi3_emulate_pro_register+0x73c/0x900 [target_core_mod] ... iscsi_target_rx_thread+0xef/0x1d0 [iscsi_target_mod] With a single-page parameter list the buffer is a kmap() direct mapping, so the over-read continues into the physically adjacent page instead of faulting. snprintf("%s") then copies whatever follows the ISID in memory into pr_reg_isid, and PR IN READ FULL STATUS reports the registration back to any initiator, turning the over-read into an info leak of kernel heap contents. Reproduced with a 4096-byte parameter list whose last TransportID ends at the end of the buffer with a 4-byte ISID and no NUL, interleaved with I/O to populate adjacent pages: the READ FULL STATUS response returned the ISID as "0xleak" followed by raw bytes that were not part of the parameter list. The snprintf() into pr_reg_isid[PR_REG_ISID_LEN] caps the echoed ISID at 15 characters, so at most 11 bytes past the buffer are leaked per command, but the PR OUT command is not rate limited. Any initiator that can send PR OUT to an iSCSI-exported LUN can trigger either variant, including a guest via vhost-scsi. Require 8 bytes to remain after the ",i,0x" separator, and a NUL inside the rest of the descriptor, before the ISID pointer is returned. REGISTER AND MOVE fails with TCM_INVALID_PARAMETER_LIST; on SPEC_I_PT no target port claims the malformed TransportID, and the command fails the same way.
CVE-2026-76415 1 Cisco 1 Secure Endpoint 2026-11-20 7.5 High
A vulnerability in the Yoda'a Crytper (yC) Portable Executable (PE) unpacker of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. . This vulnerability is due to lack of proper error checking for negative values when processing the PE file to be unpacked. An attacker could exploit this vulnerability by sending a PE file to be unpacked. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.
CVE-2026-76421 1 Cisco 1 Secure Endpoint 2026-11-20 7.5 High
A vulnerability in the LZX data algorithm for Microsoft Compiled HTML Help (CHM) file scanning in ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to improper boundary checks when applying the LZX data algorithm to CHM files during the decoder stage, which may result in buffer overflow. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software.
CVE-2026-132906 1 Jetbrains 1 Teamcity 2026-11-20 8.8 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 remote code execution was possible via native code loading in the Kotlin DSL sandbox
CVE-2026-99427 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.9 Medium
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB last_entry pointer from unbounded LastNameOffset CIFSFindFirst() and CIFSFindNext() locate the last entry of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response by adding the LastNameOffset of the response parameters to the start of the data area, and store the result in psrch_inf->last_entry. MS-CIFS 2.2.6.2.2 defines that offset as the offset of the entry's file name; the client follows the reading of NT and Samba servers, which point it at the entry. LastNameOffset is only checked against CIFSMaxBufSize, which says nothing about the response actually received: validate_t2() lets the data area start up to 1024 bytes into the buffer, and SendReceive() copies at most CIFSMaxBufSize + MAX_CIFS_HDR_SIZE bytes of a response, 16468 by default, into a cifs_request allocation of CIFSMaxBufSize + MAX_SMB2_HDR_SIZE bytes, 16588 by default. The pointer itself can therefore be placed anywhere from the end of the received data to 820 bytes past the end of the allocation. The read through that pointer is far larger than its displacement. find_cifs_entry() hands last_entry to cifs_save_resume_key() after every FindNext and after the FindFirst of a search rewind, and cifs_fill_dirent() takes the length of the name from the entry itself: a __le32 FileNameLength for most levels, a __u8 for SMB_FIND_FILE_INFO_STANDARD, and for SMB_FIND_FILE_UNIX the result of a scan for the terminating NUL over up to PATH_MAX + 1 UTF-16 units. The name is recorded as the resume name of the search, and the next CIFSFindNext() rejects only a recorded length of PATH_MAX or more before copying the name into the ResumeFileName of its request and sending it with the resume key taken from the same entry: up to 4 KiB of memory from past the end of the allocation leaks to the server, and for SMB_FIND_FILE_UNIX the NUL scan runs about twice as far before the length is even known. The entry does not have to lie outside the response for that either: a maximal response ends about 120 bytes before the end of the allocation, so an entry in its last bytes with a name just under PATH_MAX has nearly all of that name copied from past the allocation. It needs nothing unusual from the client: a FindNext response that reports no entries and does not end the search makes find_cifs_entry() send the next FindNext at once, carrying whatever was parsed at LastNameOffset, and a search rewind can do the same after its FindFirst. SMB1 is not negotiated by default: this takes a malicious or compromised server, a mount of it with an explicit vers=1.0, which CONFIG_CIFS_ALLOW_INSECURE_LEGACY (default y) permits, and a directory listing on that mount. With KASAN enabled, a response that places the last entry past the buffer, with a large DataOffset and a LastNameOffset near the end of its range, gives: ================================================================== BUG: KASAN: slab-out-of-bounds in cifs_save_resume_key.isra.0+0x7aa/0x7f0 Read of size 4 at addr ffff88807b55c33b by task ls/83 CPU: 1 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 cifs_save_resume_key.isra.0+0x7aa/0x7f0 cifs_readdir+0x1ed6/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 0 at 19.317556s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807b558000 which belongs to the cache cifs_request of size 16588 The buggy address is located 623 bytes to the right of allocated 16588-byte region [ffff88807b558000, ffff88807b55c0cc) ================================================================== The four bytes read there are the FileNameLength of the entry, which cifs_fill_dirent() tak ---truncated---
CVE-2026-99442 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: nvmem: core: Fix OOB read for bit offsets of more than one byte When the bit offset is BITS_PER_BYTE or larger the read position is advanced by `bytes_offset`. This is not taken into account in the per-byte read loop which still reads `cell->bytes` resulting in an out of bounds read of `bytes_offset` bytes. The information read OOB does not leak directly as the erroneously read bits are cleared. Detected by KASAN while looking for a use-after-free in simplefb.c.