Search Results (76 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-121192 1 Fastify 1 Fastify/proxy-addr 2026-11-18 6.8 Medium
@fastify/proxy-addr determines which network hops are trusted proxies and backs Fastify's trustProxy setting, so that forwarded headers can be believed. In versions 3.0.0 through 5.1.2, when trustProxy is configured with a zoned IPv6 link-local address, the trust comparison checks only the address bits and ignores the zone identifier, so a host on another link of a multi-homed server that carries the same link-local address is trusted as well. Such an attacker can spoof the X-Forwarded-For, X-Forwarded-Host and X-Forwarded-Proto headers, making the client IP, host and protocol reported by Fastify attacker-chosen values and defeating IP allowlists, rate limiting and audit logging. Exploitation requires a multi-homed server whose trustProxy is a zoned link-local address and an attacker directly on one of its other links; the default configuration and global, private or loopback trust entries are not affected. The issue is fixed in @fastify/proxy-addr 5.1.3, and users should upgrade to 5.1.3 or later. As a workaround, avoid trusting a zoned link-local address on a multi-homed host and trust a global, private or loopback proxy address instead.
CVE-2026-110710 1 Fastify 1 Fastify/multipart 2026-11-18 7.5 High
@fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 3.0.0 through 10.1.3, temporary files written by the saveRequestFiles helper are removed only by a response hook that runs when the response finishes or errors. When a client completes an upload and then disconnects before the handler writes the reply, for example while the handler scans, hashes or forwards the file, the response only emits a close event, the cleanup hook never runs, and the saved files are left on disk. An unauthenticated client can repeat this cheaply to exhaust disk space and deny service to applications that save uploaded files to disk. The issue is fixed in @fastify/multipart 10.1.4, and users should upgrade to 10.1.4 or later. As a workaround, avoid saving request files for untrusted clients, or clean the saved files from a close handler on the raw response so removal also happens when the client disconnects.
CVE-2026-124289 1 Fastify 1 Fastify/multipart 2026-11-18 7.5 High
@fastify/multipart is the official Fastify plugin for handling multipart/form-data uploads. In versions 7.4.0 through 10.1.8, when the plugin is registered with the attachFieldsToBody option, the saveRequestFiles helper treats any object in the parsed request body that carries truthy file and buffer properties as an uploaded file. An unauthenticated client can forge such an object through a plain JSON request or a JSON-typed multipart field, so attacker-chosen bytes are written to the temporary directory while upload hooks and the file count and size limits are skipped, and the saved entry keeps the attacker's filename verbatim instead of being reduced to its basename. Because that filename can contain parent directory segments, applications that use it as a write destination, as the project README example does, are exposed to an arbitrary relative-path file write from a single request. The issue is fixed in @fastify/multipart 10.1.9, and users should upgrade to 10.1.9 or later. As a workaround, call saveRequestFiles only after confirming the request is multipart, and reduce each returned filename to its basename or validate it against an allowlist before using it as a destination.
CVE-2026-128835 1 Fastify 1 Fastify/busboy 2026-11-18 7.5 High
@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, a multipart part whose header block is never terminated before the next boundary is counted by the vendored Dicer parser as an open part that never ends, so the parser emits neither a finish nor an error event and the request hangs. A single unauthenticated request of roughly one hundred bytes triggers the stall, and through @fastify/multipart the hung handler is not released when the client disconnects, so repeated requests leak handlers and whatever resources they hold, such as files, database connections and concurrency slots, until the process is restarted. The same parser is reached by the formData methods of undici versions 5.25.3 through 6.7.0. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. As a workaround, configure Fastify's handler timeout so hung handlers are eventually terminated and their resources released.
CVE-2026-128842 1 Fastify 1 Fastify/busboy 2026-11-18 5.3 Medium
@fastify/busboy is a streaming parser for multipart and url-encoded form data used by Fastify. In versions 1.0.0 through 3.2.5, the url-encoded parser stops accumulating a field only when the decoded length exactly equals the configured per-field size limit, and a malformed percent escape is passed through verbatim by the decoder, so the decoded length can jump from just below the limit to just above it and skip that equality check. The parser then keeps buffering the field in memory until the next delimiter or the end of the request, so a single unauthenticated url-encoded field or field name can grow to the size of the whole request body regardless of a much smaller configured per-field limit, with memory use bounded only by the independent whole-request body limit. The issue is fixed in @fastify/busboy 3.2.6, which clamps a field as soon as the decoded length reaches or exceeds the limit, and users should upgrade to 3.2.6 or later. As a workaround, set a conservative whole-request body limit so the per-field overshoot cannot exceed it.
CVE-2026-128846 1 Fastify 1 Fastify/busboy 2026-11-18 3.7 Low
@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 3.2.1 through 3.2.5, the parser can interpret the same multipart bytes differently depending on how they are split across socket reads: when the sequence that terminates a part's header block arrives split exactly at the configured header size limit, an off by one error drops the final header line, so a part declared as a binary file attachment is emitted as an ordinary text field instead of a file. A remote client controls both the multipart body and the header padding needed to reach the boundary and can influence segmentation, so an application that applies upload validation such as malware scanning or extension checks only to file events while trusting plain field values may process the payload through the wrong path. The parser level type confusion is fully reproducible, while the downstream validation bypass depends on the application. The issue is fixed in @fastify/busboy 3.2.6, which tracks how many terminator bytes were actually buffered when the limit is reached so a split terminator no longer corrupts the final header, and users should upgrade to 3.2.6 or later. As a workaround, apply the same validation to field values as to file uploads rather than treating file events as a trust boundary.
CVE-2026-124724 1 Fastify 1 Fastify/busboy 2026-11-18 7.5 High
@fastify/busboy is a streaming parser for multipart form data used by Fastify. In versions 1.0.0 through 3.2.5, when a request reaches the configured limit on the number of multipart parts, each further part is skipped without attaching an error listener to the skipped part stream. If the request body ends in the middle of such a skipped part, the vendored Dicer parser emits an error on that stream, and because nothing is listening Node.js raises an unhandled error event and the process exits. A single crafted unauthenticated request is therefore enough to crash the server. The bug is latent in the parser on its own and was first demonstrated through @fastify/multipart versions 10.1.2 through 10.1.4, which keep feeding the request body to the parser after a limit error, and it affects any consumer that sets a finite parts limit and parses request bodies that can be terminated early. The issue is fixed in @fastify/busboy 3.2.6, and users should upgrade to 3.2.6 or later. There is no complete application level workaround because the crash happens inside the parser before application code runs, though consumers that set a finite parts limit should also attach an error listener to the parser stream.
CVE-2026-112362 1 Fastify 1 Fastify-express 2026-11-04 9.1 Critical
@fastify/express is a Fastify plugin that runs Express middleware inside Fastify. In versions 4.0.5 through 4.0.8, when Fastify runs with the non-default ignoreDuplicateSlashes option enabled, the plugin matches path-scoped Express middleware against a URL whose duplicate-slash normalization has also collapsed the separator after an absolute-form request target's scheme, so Fastify's router resolves the request to the scoped path and runs the handler while the Express layer no longer sees that path. As a result, a request using an absolute-form target can reach a handler on a scoped route such as an admin path while the middleware for authentication, authorization, or rate limiting is skipped. An unauthenticated attacker needs only the non-default ignoreDuplicateSlashes option to be enabled. The issue is fixed in @fastify/express 4.0.9, and users should upgrade to 4.0.9 or later. As a workaround, enforce authentication in a Fastify hook such as preHandler that runs after the router resolves the request, or leave ignoreDuplicateSlashes at its default.
CVE-2026-120214 1 Fastify 1 Fastify-http-proxy 2026-11-03 5.9 Medium
@fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 11.6.0 through 11.6.2, the destination validation normalizes literal backslashes before it percent-decodes the request path, so a path that encodes its backslashes and dot-segments survives the dot-segment check and is only turned into backslash and double-dot sequences after that check has passed. When the upstream resolves on a platform that treats a backslash as a path separator, the forwarded request walks out of the configured proxy prefix and reaches a sibling location on the upstream. An unauthenticated remote attacker can use this to retrieve upstream resources outside the intended prefix, so the impact is confidentiality only, and exploitation depends on the upstream's path handling. The issue is fixed in @fastify/http-proxy 11.6.3, and users should upgrade to 11.6.3 or later. This is a follow-up to the earlier prefix-escape fix, which did not account for the encoded-backslash form.
CVE-2026-120213 1 Fastify 1 Fastify-http-proxy 2026-11-03 9.1 Critical
@fastify/http-proxy is a Fastify plugin that proxies HTTP requests to an upstream server under a configured prefix. In versions 9.0.0 through 11.6.5, when an application uses parameterized prefix and rewritePrefix options to pin clients to a fixed upstream path, the plugin substitutes URL-decoded route parameters into rewritePrefix without re-encoding them. A parameter value that encodes a path separator together with a fragment or query delimiter therefore decodes into real separators and delimiters that inject extra upstream path segments and strip the mandatory suffix the rewritePrefix was meant to enforce, without using any dot-dot traversal. An unauthenticated remote attacker can use this to reach upstream locations outside the intended prefix, leading to path-restriction bypass and, depending on the upstream, server-side request forgery or authorization bypass in the proxied service. The issue is fixed in @fastify/http-proxy 11.6.6, and users should upgrade to 11.6.6 or later. There is no workaround other than upgrading.
CVE-2026-117518 1 Fastify 1 Fastify-reply-from 2026-11-03 8.2 High
@fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP server. In versions up to and including 12.8.0, the plugin validated proxy paths against forward-slash dot-segments only and then built the target with the WHATWG URL parser, which normalizes a backslash and its percent-encoded form to a forward slash on the http, https, ws, and wss schemes. A path that uses backslash dot-segments therefore bypasses the traversal check and resolves to a different upstream path, so an application that scopes proxying to an upstream prefix, or relies on route guards in front of the forwarding call, can have an unauthenticated request escape the intended prefix and reach other upstream endpoints. The resulting access to unintended upstream resources is primarily a confidentiality impact with limited integrity impact. The issue is fixed in @fastify/reply-from 12.8.1, where the path is normalized and any segment resolving to a single or double dot, along with control characters and ambiguous whitespace, is rejected before the URL is constructed, and users should upgrade to 12.8.1 or later. There is no workaround other than upgrading.
CVE-2026-117531 1 Fastify 1 Fastify-multipart 2026-11-03 5.9 Medium
@fastify/multipart is the multipart form-data and file upload plugin for the Fastify web framework. In versions 5.3.0 through 10.1.6, the plugin does not propagate a parser error to the file stream when a request body ends inside a file part with no closing boundary, even though the Content-Length is complete, the client does not abort, and no file size limit is exceeded. The plugin destroys the in-progress file stream without an error, so a handler that iterates the request parts and performs asynchronous work before consuming the file attaches to a stream that never emits an error or end event, and the request never responds while the connection stays open. An unauthenticated remote client can repeat these malformed uploads against such a route to accumulate pending connections and exhaust server resources, so the impact is availability only and exploitation depends on the application using a delayed file consumer. The issue is fixed in @fastify/multipart 10.1.7, where the parser error is propagated to the file stream so a delayed consumer settles with an error instead of hanging, and users should upgrade to 10.1.7 or later. There is no workaround other than upgrading.
CVE-2026-120216 1 Fastify 1 Fastify 2026-11-02 5.9 Medium
fastify is a web framework for Node.js. In versions 5.8.0 through 5.12.7, when the server is configured with a nonzero handlerTimeout and a route returns a streaming response, a request whose stream has already sent its headers but stays open past the timeout crashes the server. When the timeout fires, Fastify tries to send a new error response on a response that has already started, raising an uncaught ERR_HTTP_HEADERS_SENT that terminates the Node.js process and interrupts any other in-flight requests. An unauthenticated remote client can trigger this with a single request to an affected streaming endpoint, so the impact is availability only, and exploitation requires the non-default handlerTimeout to be set. The default handlerTimeout of 0 is not affected. The issue is fixed in fastify 5.12.8, and users should upgrade to 5.12.8 or later. As a workaround, set handlerTimeout to 0, which disables the affected timeout path.
CVE-2026-110024 1 Fastify 1 Fastify/jwt 2026-10-21 6.8 Medium
@fastify/jwt is a JWT utility plugin for Fastify. In versions prior to 10.2.5, the top-level sign and verify methods replace the globally configured defaults with the per-call options instead of merging them, so passing any per-call option silently drops every global default that the call does not restate, including temporal protections such as token expiration and maximum accepted token age. A token signed this way carries no expiration claim and never expires, and verification stops enforcing a configured maximum age, so stale or never-expiring tokens are accepted. The route-level decorators for signing and verifying already merge options and are not affected. The issue is fixed in @fastify/jwt 10.2.5, and users should upgrade to 10.2.5 or later.
CVE-2026-110008 1 Fastify 1 Fastify/oauth2 2026-10-21 4.2 Medium
@fastify/oauth2 is a Fastify wrapper for OAuth2 login flows. In versions 7.2.0 through 8.3.1, the state and code-verifier cookies are set without a Path attribute at a login route with two or more path segments, while the clearing step at the OAuth callback writes them with a root path, so the original cookies survive the callback and the documented single-use guarantee for the state value does not hold. A state value an attacker learns stays valid for the rest of the browser session, letting the attacker drive their own authorization flow in the victim's browser and sign the victim in to the attacker's account (login CSRF). The issue is fixed in @fastify/oauth2 8.3.2, and users should upgrade to 8.3.2 or later. As a workaround, set an explicit cookie path so the set and the clear name the same cookie.
CVE-2026-107832 1 Fastify 1 Fastify 2026-10-15 3.7 Low
fastify is a fast and low overhead web framework for Node.js. In versions 5.12.2 through 5.12.5, the routine that lowercases header names declared in a route schema does not lowercase the enum or const header names nested inside a propertyNames subschema. As a result, a header allow-list or deny-list written with canonical (non-lowercase) casing never matches the incoming lowercased header, so a restricted header passes validation and reaches the route handler. An attacker can therefore bypass a case-sensitive header validation rule and smuggle a forbidden header past the schema, affecting the integrity of request handling. The issue is fixed in fastify 5.12.6, and users should upgrade to 5.12.6 or later. There is no workaround other than upgrading, though applications can declare header names in lowercase to avoid the mismatch.
CVE-2026-107318 1 Fastify 1 Fastify/reply-from 2026-10-11 7.4 High
@fastify/reply-from is a Fastify plugin that forwards requests to an upstream HTTP or HTTPS server. In versions prior to 12.7.0, all of the built-in HTTPS transports override the secure default and set rejectUnauthorized to false, so the proxy does not verify the TLS certificate of the upstream even when the application points it at an https upstream in the default configuration. An on-path network attacker can therefore impersonate the configured HTTPS upstream, read the credentials and request bodies the proxy forwards, and return forged responses that the application trusts. The issue is fixed in @fastify/reply-from 12.7.0, and users should upgrade to 12.7.0 or later. As a workaround, pass an explicit rejectUnauthorized true on the transport, supply an already configured undici instance, or use the undici global agent.
CVE-2026-107275 1 Fastify 1 Fastify/jwt 2026-10-09 6.8 Medium
@fastify/jwt is a JSON Web Token plugin for the Fastify web framework. In versions before 10.2.3, a time span passed to expiresIn, notBefore, or maxAge that the plugin's parser cannot read, such as a compound span, a month unit, an ISO 8601 duration, a decimal comma, or a value with surrounding whitespace, is silently dropped instead of refused. On the signing path this produces a token with no expiration claim that never expires, and on the verification path a configured maxAge stops being enforced, so a token that should be rejected for age is accepted. The issue is fixed in @fastify/jwt 10.2.3, and users should upgrade to 10.2.3 or later. As a workaround, pass these options as a number of seconds, or verify that any time-span string parses to a finite value before relying on it.
CVE-2026-90982 1 Fastify 1 Fastify-static 2026-09-18 5.3 Medium
@fastify/static is a Fastify plugin that serves static files from a configured root directory. In versions before 10.1.4, on a case-insensitive filesystem such as Windows or the default macOS volume, a route guard or allowedPath restriction can be bypassed by altering the letter case of a path segment. The route matcher is case-sensitive while the filesystem is not, so a request that changes the case of a protected segment does not match the guarded route and falls through to the static handler, yet the filesystem resolves it to the same protected file. As a result, an unauthenticated request can read a file that a route guard or allowedPath was configured to protect. The issue does not affect case-sensitive filesystems and is not a directory traversal, since nothing is served from outside the configured root. The issue is fixed in @fastify/static 10.1.4, which validates the requested path against its actual on-disk spelling and rejects case-aliased paths before authorization. As a workaround, serve static files from a case-sensitive filesystem, or ensure route guards and allowedPath rules account for every letter-case variant of the protected paths.
CVE-2026-92081 1 Fastify 1 Fastify 2026-09-16 5.9 Medium
fastify is a fast and low-overhead web framework for Node.js. In versions before 5.12.5, when a route registers a response trailer via reply.trailer() and is served over HTTP/2, fastify unconditionally sets the Transfer-Encoding: chunked header, which is forbidden on HTTP/2, so Node.js throws while serializing the response headers. The exception is not caught and becomes an uncaughtException, so a single unauthenticated HTTP/2 request to any route that uses trailers crashes the server process and drops all in-flight requests, and it can be repeated on every restart. The issue is fixed in fastify 5.12.5, and users should upgrade to 5.12.5 or later. As a workaround, avoid registering response trailers with reply.trailer() on routes served over HTTP/2 until upgrading.