Search Results (412 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-133537 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 6.8 Medium
A flaw was found in Keycloak. When evaluating access permissions, Keycloak Authorization Services improperly matches resource paths containing wildcard file extensions by evaluating only the file extension suffix and ignoring configured path prefixes. An authenticated remote attacker could exploit this vulnerability by requesting a restricted resource that shares a file extension with a more permissive resource, leading to an authorization bypass and unintended access to protected data.
CVE-2026-133536 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 4.3 Medium
A flaw was found in Keycloak. The OpenID Connect (OIDC) logout endpoint continues to honor post-logout redirect rules for disabled clients rather than rejecting the requests. If a disabled client retains permissive redirect configurations, a remote attacker can exploit this issue by supplying an arbitrary redirection target in a logout request, leading to an open redirect that can be used in phishing attacks.
CVE-2026-133226 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 4.3 Medium
A flaw was found in Keycloak. The Account API endpoint for sharing resources fails to verify whether owner-managed access is enabled and accepts permission scopes not assigned to the resource. An authenticated user can exploit this vulnerability to generate pre-granted permission tickets, causing Keycloak to bypass policy evaluation and issue access tokens with unauthorized scopes.
CVE-2026-133225 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 5.4 Medium
A flaw was found in Keycloak. When processing token requests using the User-Managed Access (UMA) grant, Keycloak fails to verify whether a target client or resource server is enabled before issuing an authorization token. An authenticated remote user can exploit this flaw to obtain valid Requesting Party Tokens (RPTs) for disabled clients, bypassing administrative access controls and permissions restrictions.
CVE-2026-133228 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 6.8 Medium
A flaw was found in Keycloak. When a client application enforces step-up authentication or multi-factor authentication (MFA) via a minimum authentication level, Keycloak fails to apply this requirement to login sessions initiated through the credential reset endpoint. An attacker who possesses a user's initial credentials (such as a password) can navigate from the reset interface back to the standard login form and authenticate without completing the required second factor. This flaw allows an attacker to obtain valid access tokens and gain unauthorized access to protected services without satisfying mandatory security controls.
CVE-2026-133224 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-20 5.4 Medium
A flaw was found in Keycloak. When an administrator revokes tokens by setting a not-before revocation cutoff, Keycloak fails to enforce this boundary when processing User-Managed Access (UMA) grant requests using ID token claims. An authenticated remote user with an active session can submit a previously revoked ID token to receive a fresh Requesting Party Token (RPT). This flaw allows an attacker to bypass token revocation and retain unauthorized access to protected resources.
CVE-2026-133435 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-19 3.7 Low
A flaw was found in Keycloak. When configured with a database that uses case-insensitive collation, Keycloak resolves realm URLs regardless of letter casing. A remote attacker can exploit this behavior by sending requests with alternate letter casing to bypass upstream reverse proxy access controls that rely on case-sensitive path matching. This issue can expose restricted authentication endpoints intended only for internal access, though Keycloak's internal authentication mechanisms remain intact.
CVE-2026-133430 1 Redhat 4 Build Keycloak, Jboss Enterprise Application Platform, Jbosseapxp and 1 more 2026-11-19 5.4 Medium
A flaw was found in Keycloak. This vulnerability allows an authenticated remote attacker to cause a denial of service by terminating active sessions of arbitrary users. When processing Security Assertion Markup Language (SAML) documents that lack a root signature, Keycloak accepts the request as long as any assertion within the document is signed, without verifying its context or placement. An attacker holding a validly signed assertion can embed it into an unsigned logout request for another user, causing Keycloak to accept the forged request and terminate the victim's session.
CVE-2026-133221 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-19 5.4 Medium
A flaw was found in Keycloak. An authenticated remote user with a pending required security action, such as configuring multi-factor authentication (MFA), can bypass the mandatory action by submitting a specially crafted request to the consent endpoint without a valid session code. Keycloak incorrectly interprets the submission as a page refresh and completes the authentication process, allowing the user to access the application without fulfilling the required security policies.
CVE-2026-117691 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-16 9.1 Critical
A flaw was found in the SAML HTTP-Redirect binding implementation of Keycloak. The issue occurs because the server processes percent-encoded parameter names (like %53AMLResponse) while the signature verification logic only checks literal parameter names. An attacker can use this discrepancy to provide a crafted, unsigned SAML message that the server processes instead of a legitimately signed one, leading to full account takeover of federated users.
CVE-2026-112201 3 Keycloak, Red Hat, Redhat 6 Keycloak-services, Red Hat Build Of Keycloak 26.4, Build Keycloak and 3 more 2026-11-15 4.8 Medium
A flaw was found in the login-failure storage component of Keycloak, the identity and access management solution. This issue specifically affects deployments using MySQL or MariaDB databases in a multi-node configuration. When multiple failed login attempts occur simultaneously for the same account, a synchronization error can cause the system to enter a repetitive loop that locks the user's record in the database. This results in legitimate login attempts for that user being blocked and failing with an error. Furthermore, because some failures are not correctly recorded during this loop, the system's brute-force protection may not accurately count all failed attempts.
CVE-2026-125652 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-15 6.8 Medium
A flaw was found in the keycloak-services component of Keycloak, which provides the core authentication and authorization logic for the identity provider. The issue occurs when a user initiates a login after visiting the password reset page, causing the system to skip mandatory security checks for Proof Key for Code Exchange (PKCE). This could allow an attacker who intercepts a login code to gain unauthorized access to the user's account without needing the required security verifier.
CVE-2026-116468 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-14 6.6 Medium
A flaw was found in the group-move and organization group reparenting endpoints of the keycloak-services component. This component is responsible for core authentication and authorization services in the Red Hat build of Keycloak. The issue occurs because the system fails to check if a target parent group confers administrative roles when a group is moved. A delegated administrator can exploit this to move a group they control under an administrative group, causing all members to inherit full realm-admin privileges and gain complete control over the realm.
CVE-2026-12977 1 Redhat 7 Fuze 7, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Expansion Pack and 4 more 2026-11-14 8.8 High
A flaw was found in the deployment-operation family of WildFly Core. Certain handlers, such as upload-deployment-url, lack proper sensitivity classification, allowing an administrator with the restricted "Maintainer" role to read sensitive configuration files. This can lead to the exfiltration of credentials and full administrative control (SuperUser) of the server.
CVE-2026-18963 1 Redhat 7 Build Keycloak, Build Of Keycloak, Jboss Enterprise Application Platform Expansion Pack and 4 more 2026-11-12 9.1 Critical
A flaw was found in the reset-credentials flow of the keycloak-services component, which is the core engine for identity and access management in Red Hat Build of Keycloak. The issue allows an unauthenticated attacker to force the password reset process for any user without needing to click the required email verification link. This can result in the attacker gaining full control over target user accounts by directly setting new credentials.
CVE-2026-89059 1 Redhat 27 Apache Camel Quarkus, Apicurio Registry, Build Keycloak and 24 more 2026-11-11 7.5 High
A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service.
CVE-2026-89058 1 Redhat 27 Apache Camel Quarkus, Apicurio Registry, Build Keycloak and 24 more 2026-11-11 7.4 High
A flaw was found in RESTEasy's CorsFilter, which, when configured to allow all origins ("*"), reflects the request's Origin header back in the Access-Control-Allow-Origin response together with Access-Control-Allow-Credentials: true. This permissive cross-origin policy allows a malicious website to make credentialed cross-origin requests and read authenticated responses from a victim's session, resulting in a loss of confidentiality.
CVE-2025-0604 1 Redhat 2 Build Keycloak, Red Hat Single Sign On 2026-11-11 5.4 Medium
A flaw was found in Keycloak. When an Active Directory user resets their password, the system updates it without performing an LDAP bind to validate the new credentials against AD. This vulnerability allows users whose AD accounts are expired or disabled to regain access in Keycloak, bypassing AD restrictions. The issue enables authentication bypass and could allow unauthorized access under certain conditions.
CVE-2026-92358 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-10 6.4 Medium
A flaw was found in the first broker login flow of Keycloak. When a user confirms an account-linking request from a different browser, a temporary proof is created to validate the link. However, this proof is not properly cleared after the link is established or when the user later manually removes the link. An attacker who controls the external identity can exploit this leftover proof to silently re-establish the link and gain unauthorized access to the victims account without any further confirmation.
CVE-2026-94001 2 Red Hat, Redhat 5 Red Hat Build Of Keycloak 26.4, Build Keycloak, Build Of Keycloak and 2 more 2026-11-10 6.5 Medium
A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The endpoint used for deleting user credentials does not correctly check for fine-grained reset-password permissions. This allows a delegated administrator, who should be restricted from resetting passwords, to delete a user's password credentials, resulting in the user being unable to log in.