| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse Kura versions 3.1.0 to 5.6.2, the iBeacon and Eddystone advertisement decoders wrongly parse the AD-structure length field of an over-the-air BLE advertising payload. Any unauthenticated attacker within BLE radio range can broadcast a two-byte advertising payload that drives the Kura beacon-scanner thread into a tight infinite loop, pinning a CPU core and permanently halting beacon ingestion until the gateway is restarted. To trigger the attack, the iBeacon/Eddystone scanner component should be installed and active. By default the components are not installed or enabled. |
| A vulnerability in Microsoft Compiled HTML Help (CHM) file scanning of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to a logic error when scanning the CHM file and following the internal file pointers. An attacker could exploit this vulnerability by sending a crafted CHM file for scanning. A successful exploit could allow the attacker to cause the ClamAV decode process to terminate due to an infinite loop, resulting in a DoS condition on the affected software. |
| A vulnerability in the InstallShield file parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to incomplete error checking when the InstallShield File Parser is performing a scan. An attacker could exploit this vulnerability by sending a crafted InstallShield file to be scanned. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate due to an infinite loop, resulting in a DoS condition on the affected software. |
| Loop with Unreachable Exit Condition (Infinite Loop) vulnerability in ash-project ash_ai allows an attacker who can influence a model's output to hang the tool loop and drive unbounded, repeated model requests.
AshAi.ToolLoop classifies a model response of :tool_calls, then filters the calls through normalize_tool_calls/2 and unprocessed_tool_calls/2. Both can empty the list: a call missing a valid name, or one reusing a tool_call_id that already has a result in history, is dropped. With an empty list the loop appended nothing and recursed with a byte-identical message list, so the conversation never advanced and the same request was re-sent every iteration. Under the supported max_iterations: :infinity this never terminated; otherwise it exhausted the full budget. Prompt-injected content can make the model re-emit a spent tool_call_id. The fix treats an empty post-filter list as terminal.
This issue affects ash_ai: from 0.6.0 before 1.0.0. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP stdlib (erl_tar module), hexpm hex_core (hex_erl_tar module), hexpm hex (mix_hex_erl_tar module) and erlang rebar3 (r3_hex_erl_tar module) allows an attacker who supplies a tar archive to cause a denial of service via a crafted GNU sparse member.
When erl_tar:extract/1,2 writes a member to disk, erl_tar:stream_to_file_loop/3 reads it in chunks of 65536 bytes by default. For a GNU sparse member whose sparse map ends before its real size, erl_tar:do_sparse_read/3 matches its trailing-hole clause before its zero-length clause. After the chunk is used up, the trailing-hole clause reads zero bytes, does not advance the position, and recurses forever. A 2048-byte archive keeps the extracting process and one scheduler busy until the process is killed. The {max_size, N} option prevents this only when N is below the real size of the member. Extraction with the memory option is not affected.
hex_core ships its own copy of erl_tar as hex_erl_tar, and Hex and rebar3 ship hex_core with prefixed module names (mix_hex_erl_tar and r3_hex_erl_tar). These copies contain the same code and do not call stdlib's erl_tar, so they are affected on any OTP version. OTP 28 is not affected, but an application running on OTP 28 is affected if it extracts archives through an affected version of hex_core, Hex or rebar3.
This issue affects OTP from OTP 29.0 before OTP 29.1.2, corresponding to stdlib from 8.0 before 8.1.1, and rebar3 from 3.27.1 before 3.28.0, and hex from 2.4.2 before 2.5.3; hex_core: from 0.14.0 before 0.20.1. |
| Gargoyle 2023.1 through 2026.1.1 contains an infinite loop vulnerability in the bundled Plus interpreter's ReadString() function in terps/plus/loaddatabase.c that fails to handle end of file. Attackers can supply an empty, truncated, or crafted .plus game file that hangs Gargoyle at full CPU until the user kills it. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in elixir-grpc grpc_server and grpc allows unauthenticated attackers to occupy a BEAM scheduler indefinitely via a client-streaming or bidirectional-streaming request whose body ends inside a gRPC message.
GRPC.Server.Adapters.Cowboy.read_stream/1 (grpc_server/lib/grpc/server/adapters/cowboy.ex, and the Cowboy adapter in grpc before the package split) asks for more data whenever the buffer does not hold a complete message. Once the request body has ended, every further read returns an empty chunk, so the buffer never changes and the function retries without end. A single 5-byte length prefix sent with END_STREAM keeps one scheduler busy for as long as the connection stays open, and repeated requests exhaust all schedulers.
This issue affects grpc: from 0.3.1 before 1.0.0; grpc_server: from 1.0.0 before 1.1.0. |
| When using the listen directive with the ssl parameter in the http block with TLSv1.3 enabled, an attacker can use a specially crafted TLS connection to cause an infinite loop in the NGINX worker process while reading the HTTP request body. As a result, the worker process stops accepting new connections and processing existing connections. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
Impact: This vulnerability allows a remote, unauthenticated attacker to cause a denial-of-service (DoS) of NGINX. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A denial-of-service vulnerability could allow an authenticated attacker to modify the parameters of the product and cause the device to enter an indefinite restart loop, requiring a manual restart to resolve. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, when the pipelined request queue is full, the pure-Python parser stores the unparsed remainder internally and also returns the same data to its caller. After a handler declines an upgrade request, the caller feeds the remainder back to the parser, causing the buffer to grow with each handled request and dispatching already-handled requests to the application again. The issue affects deployments using AIOHTTP_NO_EXTENSIONS or otherwise running without the standard C-extension wheel, and can cause excessive memory use and repeated request processing. This issue is fixed in version 3.14.4. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a malformed but non-empty BACnet WriteProperty request can drive the official server demo into a non-terminating request-processing loop with repeated heap-backed side effects. This results in a remote unauthenticated denial of service via uncontrolled resource consumption and a non-terminating request path. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated--- |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.5, 1.5.1, and 1.6.0, a Denial of Service (DoS) vulnerability exists in the BACnet stack's ReadPropertyMultiple (RPM) handler. When processing a malformed RPM request packet that lacks the expected closing tags, the function handler_read_property_multiple enters an infinite loop. This issue has been patched in versions 1.4.5, 1.5.1, and 1.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: reject invalid CCM interval at configuration time
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc). |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in device certificate verification in nerves-hub nerves_hub_web allows an unauthenticated remote attacker to cause a denial of service via a TLS client certificate whose CA is not registered. When a client certificate chains to a root in the device endpoint's trust store but no CA in the chain is registered in NervesHub, NervesHub.SSL.decide/2 refuses it with the reason :unknown_ca. Erlang/OTP ssl reads that reason as a missing trust anchor, looks for an alternative root, finds the same root and validates again without end. The handshake process queries the database on each pass and keeps running after the client disconnects, until the node restarts.
The device endpoint trusts the public roots from CAStore unless DEVICE_SSL_CACERTFILE is set, so a client certificate from a public CA whose chain allows client authentication is sufficient. A chain that ends at a root outside the trust store is refused once.
This issue affects nerves_hub: from 1.0.0 before 2.5.4. |
| Uncontrolled Resource Consumption vulnerability in the sketch deserialization of Apache DataSketches Java.
Several deserializers trusted sizes and counts declared in the serialized input. A small crafted input could make an application allocate an excessive amount of memory, leading to an OutOfMemoryError. A crafted string passed to FrequentLongsSketch.getInstance(String) could also make deserialization, or a later update, loop indefinitely. Only applications that deserialize sketches from untrusted sources are affected.
This issue affects Apache DataSketches Java: through 9.0.0.
Users are recommended to upgrade to version 9.1.0, which fixes the issue. |
| An integer overflow vulnerability in the Qt QTextCodec fromUnicode() and toUnicode() functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt Core module (Qt 5). Only builds where Qt is compiled with ICU support are affected. |
| Issue summary: Encrypting a CMS message to an EC certificate whose group order
is 1 may cause CMS_encrypt() or CMS_encrypt_ex() to loop indefinitely.
Impact summary: An attacker able to supply the recipient certificate to an
application performing CMS encryption can cause that application to loop
indefinitely, consuming CPU and resulting in Denial of Service.
CWE: CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
Description: CMS_encrypt() and CMS_encrypt_ex() encrypt a message to one or
more recipient certificates and, for an EC recipient, generate an ephemeral
key in the recipient's group. If the certificate declares a group order of 1,
random scalar generation can only produce zero. The key generation routine
then retries without limit while waiting for a nonzero private scalar, so the
call never returns.
The OpenSSL TLS and QUIC implementations do not use this path. An application
is exposed only if it calls CMS_encrypt() or CMS_encrypt_ex() with a recipient
certificate whose EC parameters are attacker-controlled. Certificates with
normal EC group orders do not trigger the loop.
OpenSSL 4.0 and later reject unknown explicit EC groups in default builds.
These versions are affected only when configured with the
enable-ec_explicit_curves option.
The result is a hang that consumes a CPU core until the process is
interrupted, a Denial of Service. The severity is Low because the attacker
must supply the recipient certificate and the application must choose to
encrypt to it; ordinary CMS encryption to trusted recipients is unaffected.
The fix makes EC key generation fail when the group has no valid nonzero
private scalar, instead of retrying indefinitely.
FIPS impact: no
The FIPS modules in 4.1, 4.0, 3.5 and 3.0 are not affected. The FIPS provider
does not support arbitrary explicit EC domain parameters, so an order-1 group
is rejected during key import before the vulnerable key generation path is
reached. |
| Loop with unreachable exit condition ('infinite loop') in the MigTD's GetQuote for the Intel(R) TDX Migration Trust Domain (MigTD) within Ring 0: Hypervisor may allow a denial of service. System software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |