Export limit exceeded: 24707 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (24707 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-133694 1 Continue 1 Continue 2026-11-20 6.3 Medium
A security vulnerability has been detected in continuedev continue 2.0.0/2.1.0. Affected by this vulnerability is the function getSidebarContent of the file extensions/vscode/src/ContinueGUIWebviewViewProvider.ts of the component Mermaid Diagram Renderer. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-95826 1 Zephyrproject 1 Zephyr 2026-11-20 7.5 High
The SMSC911x/LAN9220 Ethernet driver stages every outgoing frame in a fixed-size static buffer before pushing it to the controller FIFO. eth_tx() in drivers/ethernet/eth_smsc911x.c took the frame length from net_pkt_get_len(pkt) and passed it directly to net_pkt_read(pkt, tx_buf, total_len), with no comparison against the size of tx_buf (NET_ETH_MAX_FRAME_SIZE). net_pkt_read() takes no destination size and only fails when the packet is shorter than the requested length, so any packet longer than the staging buffer was copied past its end. Nothing between the IP layer and the driver bounds the frame to what the link can carry: ethernet_send() in subsys/net/l2/ethernet/ethernet.c performs no length check, and the IPv6 output path only compares the packet against the interface MTU when CONFIG_NET_IPV6_FRAGMENT is enabled (it is disabled by default). The size the stack will build is therefore governed by the interface MTU, and that MTU is remotely settable: handle_ra_input() in subsys/net/ip/ipv6_nbr.c honours the MTU option of any Router Advertisement with a value up to 0xffff, gated only by the standard hop-limit-255 and link-local-source checks. An unauthenticated attacker on the same link can raise the MTU and then have the device emit a single frame of several kilobytes, for example as a TCP segment from any service that returns more than ~1.5 KB or as an oversized UDP datagram. The result is an out-of-bounds write into .bss immediately after tx_buf, with the overrun length and much of its content derived from the transmitted frame. Consequences range from corruption of adjacent kernel data and a crash to potential control-flow influence where the clobbered globals hold pointers; the practical overrun size is bounded by the network buffer pool rather than by the advertised MTU. The fix rejects frames larger than NET_ETH_MAX_FRAME_SIZE with -EMSGSIZE before any TX_DATA_PORT write, so the controller FIFO is also not left holding a command word without its payload.
CVE-2026-114495 2026-11-20 7.8 High
codebase-memory-mcp provides local code intelligence for developers and AI agents through a persistent graph and MCP tools. Prior to 0.9.0, automatic import of a repository's .codebase-memory/ artifact allocated a decompression buffer using the attacker-controlled 64-bit original_size value from artifact.json but truncated that value to int when passing the destination capacity to the Zstandard decompressor. A value with bit 31 set became negative and was sign-extended to a large size_t, allowing the decompressor to write frame content beyond the actual allocation. Indexing a malicious repository containing the crafted artifact could corrupt heap memory with attacker-controlled bytes, causing a reliable crash and potentially code execution. This issue is fixed in version 0.9.0.
CVE-2026-114494 2026-11-20 7.8 High
codebase-memory-mcp provides local code intelligence for developers and AI agents through a persistent graph and MCP tools. Prior to 0.9.0, the Cypher parser accepted an unbounded number of projection items in RETURN and WITH clauses while projection executors indexed fixed 32-element stack arrays using the parsed count. A query_graph query with more than 32 projection items could therefore write beyond those arrays, and a related result-column path could read uninitialized stack slots even when no node matched. Any caller of query_graph, including an agent whose query is influenced by untrusted content, could cause a reliable server crash and potentially compromise process confidentiality and integrity. This issue is fixed in version 0.9.0.
CVE-2026-134039 2026-11-20 N/A
Krita TIFF File Parsing Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Krita. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of TIFF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28771.
CVE-2026-133680 1 D-link 1 Dcs-935l 2026-11-20 9.9 Critical
A vulnerability was found in D-Link DCS-935L 1.10.01. This affects the function loginRouter of the file web/cgi-bin/localrecording/setconf.cgi of the component Local Recording CGI. Performing a manipulation of the argument account/password results in os command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used.
CVE-2026-91837 1 Gnome 1 Networkmanager-iodine 2026-11-20 7.8 High
A flaw was found in NetworkManager-iodine, the iodine VPN plugin for NetworkManager. A local unprivileged user can exploit a vulnerability in how the 'nameserver' setting is processed when establishing an iodine VPN connection. By embedding shell metacharacters (special characters that can execute commands) in the 'nameserver' value, an attacker can inject and execute arbitrary commands. These commands run with root privileges before the application drops its elevated permissions, leading to local privilege escalation.
CVE-2026-131868 2026-11-20 7.5 High
Convert::ASN1 versions before 0.37 for Perl allow memory exhaustion via a declared element length passed unchecked to sysread in asn_read and asn_get. The length an element declares in its BER header is passed to sysread as the read size. Perl grows the target buffer to that size before reading, so memory is allocated from the declared length, not from the data received. A 6-byte header can declare a length of up to 4GB. A single header makes the reading process allocate the declared size. Where the allocation fails, perl exits with "Out of memory", which eval cannot catch.
CVE-2026-77326 2026-11-20 8.6 High
MapServer is a system for developing web-based GIS applications. From 8.2.0 until 8.6.5, an unauthenticated attacker can send a WMS GetLegendGraphic request with a nonempty BBOX and repeated LAYER parameters to trigger a heap buffer overflow in msWMSDispatch() in src/mapwms.cpp. The handler appends synthesized entries to cgiRequestObj.ParamNames and cgiRequestObj.ParamValues at NumParams without retaining the arrays' capacity or reallocating them, while incrementing NumParams inside the loop. Once the parser's hidden capacity is exhausted, the writes pass the heap allocation boundary. A single request can corrupt heap memory and crash the process; code execution may be possible but was not demonstrated. This issue is fixed in version 8.6.5.
CVE-2026-62321 1 Netatalk 1 Netatalk 2026-11-20 N/A
Netatalk is a Free and Open Source file server suite for Unix-like operating systems. From 3.1.0 until 4.5.1, the afpd Spotlight RPC fetchQueryResultsForContext: reply path in etc/afpd/spotlight_marshalling.c calls the top-level sl_pack function from sl_pack_filemeta on a shifted sub-buffer without passing the remaining capacity of the outer DSI reply buffer. An authenticated AFP client can request an amplified nested file-metadata tree so the nested packer applies MAX_SLQ_DAT relative to the shifted pointer and writes beyond struct DSI::data. The out-of-bounds write corrupts heap memory beyond the DSI reply buffer. This issue is fixed in version 4.5.1.
CVE-2026-103933 1 Netatalk 1 Netatalk 2026-11-20 N/A
Netatalk is a Free and Open Source file server suite for Unix-like operating systems. From 2.1.0 until 4.5.2, get_eacontent in libatalk/vfs/ea_ad.c subtracts MAX_REPLY_EXTRA_BYTES from a client-controlled FPGetExtAttr MaxReplySize without rejecting values from 1 through 5, and a signed-to-unsigned comparison can then select an untrusted AppleDouble ea_size. An authenticated client on a volume configured with ea = ad can use a pre-existing malformed AppleDouble sidecar to make read copy attacker-controlled bytes beyond dsi->data + 6 into the surrounding struct DSI, including protocol callback pointers. The malformed sidecar must already exist or be created through a separate local, co-export, management, restore, or vulnerability-assisted write path, and practical code execution depends on the target architecture, structure layout, and address uncertainty; runtime command execution was demonstrated on one x86-64 build. Volumes using ea = sys, ea = none, or ea = auto when it resolves to native system xattrs do not reach this path. This issue is fixed in version 4.5.2.
CVE-2026-132825 1 Ruby-lang 1 Ruby 2026-11-20 7.4 High
Ruby before 3.3.14, 3.4.13, and 4.0.10 has a heap-based buffer overflow during case conversion. One byte can be written outside a buffer for, for example, ISO-8859-1 or Windows-1252.
CVE-2026-77347 2026-11-20 N/A
Pozeiden is a MermaidJS renderer written in Zig. Prior to 0.3.0, src/renderers/c4.zig, src/renderers/class.zig, src/renderers/er.zig, and src/renderers/requirement.zig use fixed row-layout arrays while deriving subsequent loop bounds from an untrusted diagram's actual item count, and src/renderers/state.zig indexes a fixed depth array using user-controlled nesting depth. A valid diagram with at least 193 grid items can make the row count exceed the 64-row storage, while a deeply nested state diagram can exceed the col_count depth storage through the public pozeiden.render() path. Safe CLI and ReleaseSafe builds abort the rendering process, enabling reliable denial of service in applications that render untrusted diagrams. ReleaseSmall WASM builds with safety checks disabled instead perform out-of-bounds stack reads or writes, creating a memory-safety violation. This issue is fixed in version 0.3.0.
CVE-2026-129995 2026-11-20 8.8 High
mcp-ssh-manager is an MCP server for managing servers over SSH with human approval, an encrypted vault, and a live audit trail. Prior to 3.8.5, ssh_backup_create, ssh_backup_restore, ssh_backup_schedule, and ssh_backup_list build remote shell commands from caller-controlled values in src/backup-manager.js and inline backup handlers in src/index.js without neutralizing shell metacharacters. Crafted database, connection, backup directory, path, exclusion, schedule, or comment arguments can therefore execute arbitrary OS commands on managed remote servers as the configured SSH user. ssh_backup_schedule can persist execution through cron. ssh_backup_list does not pass through the server policy check and remains available in readonly and restricted modes, allowing command execution despite those restrictions. Tool arguments can be supplied by a malicious or compromised MCP client or steered through indirect prompt injection; fully trusted benign arguments do not trigger the issue. The earlier database-helper remediation for CVE-2026-77383 applied shell quoting to src/database-manager.js but did not cover these parallel backup builders. This issue is fixed in version 3.8.5.
CVE-2026-77383 2026-11-20 N/A
mcp-ssh-manager is an MCP server for managing servers over SSH with human approval, an encrypted vault, and a live audit trail. Prior to 3.6.7, ssh_db_list, ssh_db_dump, ssh_db_import, and ssh_db_restore in src/database-manager.js interpolate caller-controlled database, table, collection, file path, user, host, port, and password values into shell-evaluated command strings without neutralization. Shell metacharacters in these arguments therefore execute arbitrary commands on the configured SSH target as the account used by the MCP server. ssh_db_list is classified as read-only and remains available in readonly and restricted server security modes, so this path bypasses the command-execution boundary those modes are intended to enforce. The dump and import builders are blocked in readonly mode but remain vulnerable in the default unrestricted mode. The earlier version 3.6.5 hardening covered only ssh_db_query query text; it did not protect the list, dump, import, or restore builders, or the connection flags used by query builders. This issue is fixed in version 3.6.7.
CVE-2026-88711 1 Asus 1 Router Firmware 2026-11-20 N/A
Improper neutralization of special elements used in an OS command in certain ASUS Router firmware models allows an remote attacker to to execute arbitrary commands with root privileges by inducing a logged-in administrator to visit a malicious website. Refer to the ' Security Update for ASUS Router Firmware ' section on the ASUS Security Advisory for more information.
CVE-2026-101113 1 Elecom 2 Wrc-be36qs-b, Wrc-w701-b 2026-11-20 7.2 High
Multiple ELECOM wireless LAN routers contain an OS command injection vulnerability that may cause an arbitrary OS command to be executed by an attacker who can access the administrative interface of the affected product.
CVE-2026-118900 1 The Imperial Household Agency 1 Imperial Palaces Guide 2026-11-20 N/A
An OS command injection vulnerability exists in the Android application "Imperial Palaces Guide" provided by The Imperial Household Agency. An attacker may be able to execute arbitrary OS commands with the privileges of the application.
CVE-2026-130434 2 Wireshark, Wireshark Foundation 2 Wireshark, Wireshark 2026-11-20 5.5 Medium
Protocol dissector crashes in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service
CVE-2026-130436 2 Wireshark, Wireshark Foundation 2 Wireshark, Wireshark 2026-11-20 5.5 Medium
Multiple protocol dissector memory leaks in 4.6.0 to 4.6.9 and 4.4.0 to 4.4.19 allows denial of service