Export limit exceeded: 429899 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (429899 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-132910 1 Jetbrains 1 Teamcity 2026-11-20 7.5 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 unauthenticated DoS via the agent protocol was possible
CVE-2026-132913 2026-11-20 8.4 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the P4 Code Review build tab was possible
CVE-2026-132914 2026-11-20 8 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on the Issue Log tab was possible
CVE-2026-132916 2026-11-20 7.1 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 arbitrary file deletion on the server was possible via the Kotlin DSL sandbox
CVE-2026-132917 2026-11-20 8.8 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 remote code execution was possible via a file write bypass in the Kotlin DSL sandbox
CVE-2026-132918 2026-11-20 7.6 High
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS on build and queue pages was possible
CVE-2026-132920 1 Jetbrains 1 Teamcity 2026-11-20 4.3 Medium
In JetBrains TeamCity before 2026.2, 2026.1.4 an SSRF via connection tests was possible for users without project edit permissions
CVE-2026-132921 1 Jetbrains 1 Teamcity 2026-11-20 6.8 Medium
In JetBrains TeamCity before 2026.2 two-factor authentication bypass was possible via access token management
CVE-2026-132922 1 Jetbrains 1 Teamcity 2026-11-20 6.1 Medium
In JetBrains TeamCity before 2026.2, 2026.1.4 stored XSS in the unified diff page syntax highlighting was possible
CVE-2026-132923 2026-11-20 4.8 Medium
In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 stored XSS in SSH key management was possible
CVE-2026-132924 1 Jetbrains 1 Teamcity 2026-11-20 5.4 Medium
In JetBrains TeamCity before 2026.2, 2026.1.4 improper authorization allowed users with the Run build permission to delete Perforce workspaces
CVE-2026-99413 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained.
CVE-2026-99414 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()]
CVE-2026-99415 1 Linux 2 Linux, Linux Kernel 2026-11-20 2.5 Low
In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate().
CVE-2026-99416 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.0 Medium
In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan.
CVE-2026-99417 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ovl: fix a torn path in ovl_get_redirect() A hard link of a metacopy file that races with a rename of an ancestor stores a redirect to the wrong lower file. Each component of an absolute redirect must be the name that a dentry has in the parent that the walk continues with. ovl_get_redirect() copies the name under d_lock and calls dget_parent() after the unlock, and the callers for a hard link hold no lock that stops a rename across directories. A rename between the two steps combines the old name with the new parent. With delays in ovl_get_redirect(), an unprivileged user hard-linked a metacopy file while renaming its ancestor to another directory, the stored redirect named another lower path, and after a remount the file showed the data of a root-only file. Fix this by taking the parent first and checking it again under d_lock.
CVE-2026-99418 1 Linux 2 Linux, Linux Kernel 2026-11-20 3.3 Low
In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up an xattr value that was never read Copy-up stores uninitialized kernel memory in an xattr of the upper file, where the user can read it. ovl_copy_xattr() may only pass bytes to ovl_do_setxattr() that ovl_do_getxattr() has read. When the read fails with -ERANGE the function asks for the size again, and if the new size fits the buffer it stores the buffer although nothing was read into it. The buffer comes from kvmalloc(), or it still holds the value of the previous xattr. A FUSE lower layer that answers every sized GETXATTR with -ERANGE made copy-up store 4096 bytes that the server never sent, with a kernel pointer in them, as an xattr of the upper file. Fix this by failing the copy-up with -EIO when the size that follows -ERANGE fits the buffer.
CVE-2026-99419 1 Linux 2 Linux, Linux Kernel 2026-11-20 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up a dentry that was removed A change to a removed file through an open descriptor replaces whatever has its old name in the upper layer. Copy up must only create a name in the upper directory, never replace one. After an unlink, an rmdir or a rename over a lower dentry, a dentry that an open file keeps alive still has its old parent and name, but in the upper directory that name is now a whiteout or a new object. ovl_copy_up_workdir() renames the copy over it, which brings back the removed object and destroys whatever took its name. An unprivileged user opened a lower FIFO and unlinked it, root created a file at that name, and fchmod on the old descriptor replaced the file of root with the FIFO. Fix this by looking up the target name of the rename in ovl_copy_up_workdir() with LOOKUP_EXCL, so that copy up fails with -EEXIST if the name is taken, as copy up with O_TMPFILE already does when it links the copy to the name. [amir: use LOOKUP_EXCL instead of relying on d_unhashed()]
CVE-2026-99420 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ovl: check that the parents of volatile/dirty are dirs An unprivileged user crashes the kernel by mounting overlayfs with the volatile option. A dentry that serves as the parent of a lookup must be a directory. ovl_create_volatile_dirty() walks work/incompat/volatile/dirty by name, and ovl_lookup_or_create() returns an existing entry whatever its type. A file or a symlink that another task creates during the mount becomes the parent of the next lookup, which calls a NULL ->lookup. An unprivileged user mounted overlayfs with "volatile" in a user namespace while a second process created a symlink named work/incompat, and the mount task oopsed on a NULL ->lookup call. Fix this by returning -ENOTDIR from ovl_lookup_or_create() when the caller asked for a directory and the existing entry is a non-dir.
CVE-2026-99421 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ovl: always encode the origin fh when index is enabled On an overlay with index=on,nfs_export=on, copy up of a directory crashes the kernel once an LSM has started to deny CAP_DAC_READ_SEARCH to the mounter, the task that mounted the overlay. The mount and the LSM policy change require root. After that, any user who can write to a directory that exists only in a lower layer triggers the oops by doing so. Before a file or directory that exists only in a lower layer is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. On copy up, ovl_get_origin_fh() encodes the file handle of the lower inode, called the origin. It returns NULL if ovl_can_decode_fh() says that the lower filesystem cannot decode handles. Whether the callers can handle NULL depends on the index option: - Without an index, NULL is fine: the callers store an empty origin xattr. - With index enabled, overlayfs keeps entries for copied up inodes in an internal index directory. The name of an index entry is derived from the handle, so ovl_get_origin_fh() must return a handle or an error. The mount only enables the index if ovl_can_decode_fh() succeeds for all layers, but the result can change later. The function checks the export operations of the filesystem and capable(CAP_DAC_READ_SEARCH). Copy up runs with the mounter's credentials, and an LSM can start to deny the capability to those credentials after the mount. ovl_get_origin_fh() then returns NULL with index enabled. This goes wrong in two callers: - With nfs_export=on, copy up of a directory creates an index entry for the directory. ovl_create_index() passes the NULL handle to ovl_get_index_name_fh(), which dereferences it. - If the result changes while mount(2) is still running, ovl_get_indexdir() passes a NULL from ovl_get_origin_fh() to ovl_verify_set_fh() in the same way. Before the commit in the Fixes tag, these two callers encoded the handle themselves, without consulting ovl_can_decode_fh(). Reproduced with a BPF LSM program that started to deny the capability after the mount. An unprivileged touch in a directory that had not been copied up yet oopsed in ovl_get_index_name_fh(). With this patch the touch succeeds and the directory gets its index entry. Fix this by calling ovl_can_decode_fh() in ovl_get_origin_fh() only when index is disabled.