Export limit exceeded: 429927 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36484 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36484 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-71076 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Limit num_syncs to prevent oversized allocations The OA open parameters did not validate num_syncs, allowing userspace to pass arbitrarily large values, potentially leading to excessive allocations. Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS, returning -EINVAL when the limit is violated. v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh) (cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) | ||||
| CVE-2025-40325 | 1 Linux | 2 Kernel, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace. | ||||
| CVE-2025-39958 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Make attach succeed when the device was surprise removed When a PCI device is removed with surprise hotplug, there may still be attempts to attach the device to the default domain as part of tear down via (__iommu_release_dma_ownership()), or because the removal happens during probe (__iommu_probe_device()). In both cases zpci_register_ioat() fails with a cc value indicating that the device handle is invalid. This is because the device is no longer part of the instance as far as the hypervisor is concerned. Currently this leads to an error return and s390_iommu_attach_device() fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail() because attaching to the default domain must never fail. With the device fenced by the hypervisor no DMAs to or from memory are possible and the IOMMU translations have no effect. Proceed as if the registration was successful and let the hotplug event handling clean up the device. This is similar to how devices in the error state are handled since commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device is in error state") except that for removal the domain will not be registered later. This approach was also previously discussed at the link. Handle both cases, error state and removal, in a helper which checks if the error needs to be propagated or ignored. Avoid magic number condition codes by using the pre-existing, but never used, defines for PCI load/store condition codes and rename them to reflect that they apply to all PCI instructions. | ||||
| CVE-2025-39835 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: do not propagate ENODATA disk errors into xattr code ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code; namely, that the requested attribute name could not be found. However, a medium error from disk may also return ENODATA. At best, this medium error may escape to userspace as "attribute not found" when in fact it's an IO (disk) error. At worst, we may oops in xfs_attr_leaf_get() when we do: error = xfs_attr_leaf_hasname(args, &bp); if (error == -ENOATTR) { xfs_trans_brelse(args->trans, bp); return error; } because an ENODATA/ENOATTR error from disk leaves us with a null bp, and the xfs_trans_brelse will then null-deref it. As discussed on the list, we really need to modify the lower level IO functions to trap all disk errors and ensure that we don't let unique errors like this leak up into higher xfs functions - many like this should be remapped to EIO. However, this patch directly addresses a reported bug in the xattr code, and should be safe to backport to stable kernels. A larger-scope patch to handle more unique errors at lower levels can follow later. (Note, prior to 07120f1abdff we did not oops, but we did return the wrong error code to userspace.) | ||||
| CVE-2025-39819 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/smb: Fix inconsistent refcnt update A possible inconsistent update of refcount was identified in `smb2_compound_op`. Such inconsistent update could lead to possible resource leaks. Why it is a possible bug: 1. In the comment section of the function, it clearly states that the reference to `cfile` should be dropped after calling this function. 2. Every control flow path would check and drop the reference to `cfile`, except the patched one. 3. Existing callers would not handle refcount update of `cfile` if -ENOMEM is returned. To fix the bug, an extra goto label "out" is added, to make sure that the cleanup logic would always be respected. As the problem is caused by the allocation failure of `vars`, the cleanup logic between label "finished" and "out" can be safely ignored. According to the definition of function `is_replayable_error`, the error code of "-ENOMEM" is not recoverable. Therefore, the replay logic also gets ignored. | ||||
| CVE-2025-39808 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-ntrig: fix unable to handle page fault in ntrig_report_version() in ntrig_report_version(), hdev parameter passed from hid_probe(). sending descriptor to /dev/uhid can make hdev->dev.parent->parent to null if hdev->dev.parent->parent is null, usb_dev has invalid address(0xffffffffffffff58) that hid_to_usb_dev(hdev) returned when usb_rcvctrlpipe() use usb_dev,it trigger page fault error for address(0xffffffffffffff58) add null check logic to ntrig_report_version() before calling hid_to_usb_dev() | ||||
| CVE-2025-39797 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, differentiated only by their destination addresses. This behavior causes inconsistencies during SPI lookups for inbound packets. Since the lookup may return an arbitrary SA among those with the same SPI, packet processing can fail, resulting in packet drops. According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA is uniquely identified by the SPI and optionally protocol. Reproducing the Issue Reliably: To consistently reproduce the problem, restrict the available SPI range in charon.conf : spi_min = 0x10000000 spi_max = 0x10000002 This limits the system to only 2 usable SPI values. Next, create more than 2 Child SA. each using unique pair of src/dst address. As soon as the 3rd Child SA is initiated, it will be assigned a duplicate SPI, since the SPI pool is already exhausted. With a narrow SPI range, the issue is consistently reproducible. With a broader/default range, it becomes rare and unpredictable. Current implementation: xfrm_spi_hash() lookup function computes hash using daddr, proto, and family. So if two SAs have the same SPI but different destination addresses, then they will: a. Hash into different buckets b. Be stored in different linked lists (byspi + h) c. Not be seen in the same hlist_for_each_entry_rcu() iteration. As a result, the lookup will result in NULL and kernel allows that Duplicate SPI Proposed Change: xfrm_state_lookup_spi_proto() does a truly global search - across all states, regardless of hash bucket and matches SPI and proto. | ||||
| CVE-2025-39794 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: tegra: Use I/O memcpy to write to IRAM Kasan crashes the kernel trying to check boundaries when using the normal memcpy. | ||||
| CVE-2025-39784 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix link speed calculation on retrain failure When pcie_failed_link_retrain() fails to retrain, it tries to revert to the previous link speed. However it calculates that speed from the Link Control 2 register without masking out non-speed bits first. PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in pcie_set_target_speed(): pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s pci 0000:00:01.1: retraining failed WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000 pcie_failed_link_retrain pci_device_add pci_scan_single_device Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN. [bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de] | ||||
| CVE-2025-39775 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mremap: fix WARN with uffd that has remap events disabled Registering userfaultd on a VMA that spans at least one PMD and then mremap()'ing that VMA can trigger a WARN when recovering from a failed page table move due to a page table allocation error. The code ends up doing the right thing (recurse, avoiding moving actual page tables), but triggering that WARN is unpleasant: WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_normal_pmd mm/mremap.c:357 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_pgt_entry mm/mremap.c:595 [inline] WARNING: CPU: 2 PID: 6133 at mm/mremap.c:357 move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Modules linked in: CPU: 2 UID: 0 PID: 6133 Comm: syz.0.19 Not tainted 6.17.0-rc1-syzkaller-00004-g53e760d89498 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:move_normal_pmd mm/mremap.c:357 [inline] RIP: 0010:move_pgt_entry mm/mremap.c:595 [inline] RIP: 0010:move_page_tables+0x3832/0x44a0 mm/mremap.c:852 Code: ... RSP: 0018:ffffc900037a76d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000032930007 RCX: ffffffff820c6645 RDX: ffff88802e56a440 RSI: ffffffff820c7201 RDI: 0000000000000007 RBP: ffff888037728fc0 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000032930007 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900037a79a8 R14: 0000000000000001 R15: dffffc0000000000 FS: 000055556316a500(0000) GS:ffff8880d68bc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30863fff CR3: 0000000050171000 CR4: 0000000000352ef0 Call Trace: <TASK> copy_vma_and_data+0x468/0x790 mm/mremap.c:1215 move_vma+0x548/0x1780 mm/mremap.c:1282 mremap_to+0x1b7/0x450 mm/mremap.c:1406 do_mremap+0xfad/0x1f80 mm/mremap.c:1921 __do_sys_mremap+0x119/0x170 mm/mremap.c:1977 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f00d0b8ebe9 Code: ... RSP: 002b:00007ffe5ea5ee98 EFLAGS: 00000246 ORIG_RAX: 0000000000000019 RAX: ffffffffffffffda RBX: 00007f00d0db5fa0 RCX: 00007f00d0b8ebe9 RDX: 0000000000400000 RSI: 0000000000c00000 RDI: 0000200000000000 RBP: 00007ffe5ea5eef0 R08: 0000200000c00000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000002 R13: 00007f00d0db5fa0 R14: 00007f00d0db5fa0 R15: 0000000000000005 </TASK> The underlying issue is that we recurse during the original page table move, but not during the recovery move. Fix it by checking for both VMAs and performing the check before the pmd_none() sanity check. Add a new helper where we perform+document that check for the PMD and PUD level. Thanks to Harry for bisecting. | ||||
| CVE-2025-39763 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered If a synchronous error is detected as a result of user-space process triggering a 2-bit uncorrected error, the CPU will take a synchronous error exception such as Synchronous External Abort (SEA) on Arm64. The kernel will queue a memory_failure() work which poisons the related page, unmaps the page, and then sends a SIGBUS to the process, so that a system wide panic can be avoided. However, no memory_failure() work will be queued when abnormal synchronous errors occur. These errors can include situations like invalid PA, unexpected severity, no memory failure config support, invalid GUID section, etc. In such a case, the user-space process will trigger SEA again. This loop can potentially exceed the platform firmware threshold or even trigger a kernel hard lockup, leading to a system reboot. Fix it by performing a force kill if no memory_failure() work is queued for synchronous errors. [ rjw: Changelog edits ] | ||||
| CVE-2025-39753 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Set .migrate_folio in gfs2_{rgrp,meta}_aops Clears up the warning added in 7ee3647243e5 ("migrate: Remove call to ->writepage") that occurs in various xfstests, causing "something found in dmesg" failures. [ 341.136573] gfs2_meta_aops does not implement migrate_folio [ 341.136953] WARNING: CPU: 1 PID: 36 at mm/migrate.c:944 move_to_new_folio+0x2f8/0x300 | ||||
| CVE-2025-39752 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: rockchip: fix kernel hang during smp initialization In order to bring up secondary CPUs main CPU write trampoline code to SRAM. The trampoline code is written while secondary CPUs are powered on (at least that true for RK3188 CPU). Sometimes that leads to kernel hang. Probably because secondary CPU execute trampoline code while kernel doesn't expect. The patch moves SRAM initialization step to the point where all secondary CPUs are powered down. That fixes rarely hangs on RK3188: [ 0.091568] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.091996] rockchip_smp_prepare_cpus: ncores 4 | ||||
| CVE-2025-39748 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Forget ranges when refining tnum after JSET Syzbot reported a kernel warning due to a range invariant violation on the following BPF program. 0: call bpf_get_netns_cookie 1: if r0 == 0 goto <exit> 2: if r0 & Oxffffffff goto <exit> The issue is on the path where we fall through both jumps. That path is unreachable at runtime: after insn 1, we know r0 != 0, but with the sign extension on the jset, we would only fallthrough insn 2 if r0 == 0. Unfortunately, is_branch_taken() isn't currently able to figure this out, so the verifier walks all branches. The verifier then refines the register bounds using the second condition and we end up with inconsistent bounds on this unreachable path: 1: if r0 == 0 goto <exit> r0: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0xffffffffffffffff) 2: if r0 & 0xffffffff goto <exit> r0 before reg_bounds_sync: u64=[0x1, 0xffffffffffffffff] var_off=(0, 0) r0 after reg_bounds_sync: u64=[0x1, 0] var_off=(0, 0) Improving the range refinement for JSET to cover all cases is tricky. We also don't expect many users to rely on JSET given LLVM doesn't generate those instructions. So instead of improving the range refinement for JSETs, Eduard suggested we forget the ranges whenever we're narrowing tnums after a JSET. This patch implements that approach. | ||||
| CVE-2025-39746 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: shutdown driver when hardware is unreliable In rare cases, ath10k may lose connection with the PCIe bus due to some unknown reasons, which could further lead to system crashes during resuming due to watchdog timeout: ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware ath10k_pci 0000:01:00.0: already restarting ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11 ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11 ieee80211 phy0: PM: **** DPM device timeout **** Call Trace: panic+0x125/0x315 dpm_watchdog_set+0x54/0x54 dpm_watchdog_handler+0x57/0x57 call_timer_fn+0x31/0x13c At this point, all WMI commands will timeout and attempt to restart device. So set a threshold for consecutive restart failures. If the threshold is exceeded, consider the hardware is unreliable and all ath10k operations should be skipped to avoid system crash. fail_cont_count and pending_recovery are atomic variables, and do not involve complex conditional logic. Therefore, even if recovery check and reconfig complete are executed concurrently, the recovery mechanism will not be broken. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 | ||||
| CVE-2025-39745 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcutorture: Fix rcutorture_one_extend_check() splat in RT kernels For built with CONFIG_PREEMPT_RT=y kernels, running rcutorture tests resulted in the following splat: [ 68.797425] rcutorture_one_extend_check during change: Current 0x1 To add 0x1 To remove 0x0 preempt_count() 0x0 [ 68.797533] WARNING: CPU: 2 PID: 512 at kernel/rcu/rcutorture.c:1993 rcutorture_one_extend_check+0x419/0x560 [rcutorture] [ 68.797601] Call Trace: [ 68.797602] <TASK> [ 68.797619] ? lockdep_softirqs_off+0xa5/0x160 [ 68.797631] rcutorture_one_extend+0x18e/0xcc0 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797646] ? local_clock+0x19/0x40 [ 68.797659] rcu_torture_one_read+0xf0/0x280 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797678] ? __pfx_rcu_torture_one_read+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797804] ? __pfx_rcu_torture_timer+0x10/0x10 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797815] rcu-torture: rcu_torture_reader task started [ 68.797824] rcu-torture: Creating rcu_torture_reader task [ 68.797824] rcu_torture_reader+0x238/0x580 [rcutorture 2466dbd2ff34dbaa36049cb323a80c3306ac997c] [ 68.797836] ? kvm_sched_clock_read+0x15/0x30 Disable BH does not change the SOFTIRQ corresponding bits in preempt_count() for RT kernels, this commit therefore use softirq_count() to check the if BH is disabled. | ||||
| CVE-2025-39724 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix panic due to PSLVERR When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 | ||||
| CVE-2025-39701 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: Fix the driver update version check The security-version-number check should be used rather than the runtime version check for driver updates. Otherwise, the firmware update would fail when the update binary had a lower runtime version number than the current one. [ rjw: Changelog edits ] | ||||
| CVE-2025-39681 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper Since 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot") resctrl_cpu_detect() has been moved from common CPU initialization code to the vendor-specific BSP init helper, while Hygon didn't put that call in their code. This triggers a division by zero fault during early booting stage on our machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale. Add the missing resctrl_cpu_detect() in the Hygon BSP init helper. [ bp: Massage commit message. ] | ||||
| CVE-2025-38709 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: loop: Avoid updating block size under exclusive owner Syzbot came up with a reproducer where a loop device block size is changed underneath a mounted filesystem. This causes a mismatch between the block device block size and the block size stored in the superblock causing confusion in various places such as fs/buffer.c. The particular issue triggered by syzbot was a warning in __getblk_slow() due to requested buffer size not matching block device block size. Fix the problem by getting exclusive hold of the loop device to change its block size. This fails if somebody (such as filesystem) has already an exclusive ownership of the block device and thus prevents modifying the loop device under some exclusive owner which doesn't expect it. | ||||