Export limit exceeded: 429988 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429988 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429988 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99559 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9524/1: mm: align hugetlb mappings to the huge page size mmap(MAP_HUGETLB) on 32-bit Arm can return an address which is not aligned to the huge page size. In a QEMU virt guest, unmapping the VMA then hits the alignment check in __unmap_hugepage_range(): kernel BUG at mm/hugetlb.c:5213! Internal error: Oops - BUG: 0 [#1] SMP ARM PC is at __unmap_hugepage_range+0x540/0x584 LR is at __zap_vma_range+0x13a0/0x1410 Commit 7bd3f1e1a9ae ("mm: make hugetlb mappings go through mm_get_unmapped_area_vmflags") made hugetlb mappings use the architecture's arch_get_unmapped_area(). The generic implementations handle hugetlb alignment, but the Arm implementations only account for the optional SHMLBA cache-colouring constraint. A 4 KiB-page kernel can therefore align the mapping to 4 KiB or 16 KiB instead of the required 2 MiB. Set the alignment mask from the file's hstate for hugetlb mappings in both Arm implementations. Huge-page alignment also satisfies the SHMLBA constraint. | ||||
| CVE-2026-99560 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix reset panic caused by the WM2 rx irq mask mt7925_irq_map sets wm2_complete_mask, but mt7925_dma_layout has no tx done ring, so the MT_RXQ_MCU_WA queue and its NAPI are never set up. On a chip reset, mt7925e_mac_reset() calls napi_disable() on that NAPI and crashes: BUG: kernel NULL pointer dereference, address: 0000000000000a40 Workqueue: mt76 mt7925_mac_reset_work [mt7925_common] RIP: 0010:mutex_lock+0x1c/0x50 Call Trace: napi_disable+0x1d/0x50 mt7925e_mac_reset+0x327/0x420 [mt7925e] mt7925_mac_reset_work+0x9a/0x1a0 [mt7925_common] Remove the WM2 mask from mt7925_irq_map and from MT7925_INT_RX_DONE_ALL. | ||||
| CVE-2026-99561 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fork: don't create io threads once PF_POSTCOREDUMP is set zap_process() skips every thread that already has PF_POSTCOREDUMP set. Such a thread is past synchronize_group_exit(), so a coredump can't catch it anymore. It isn't counted in core_state->threads_remaining and it isn't sent SIGKILL. do_exit() sets PF_POSTCOREDUMP in synchronize_group_exit() and calls io_uring_files_cancel() right after that. The cancellation runs task work and a create_worker_cb() that io-wq queued before the exit creates a new io-wq worker from there. If another thread started a coredump in the meantime that worker joins a thread-group which is already being dumped. zap_process() never saw it so it was never counted. But when it exits it sees signal->core_state in synchronize_group_exit() and decrements threads_remaining like any other thread. So the count reaches zero one thread early and the dumper leaves coredump_wait_inactive() while a thread it counted is still running. The task has no fatal signal pending because zap_process() deliberately didn't send it one, and it never went through get_signal() so it doesn't have PF_SIGNALED either. Refuse to create an io thread when the creator has PF_POSTCOREDUMP. That costs nothing. io_uring_files_cancel() raises IO_WQ_BIT_EXIT before it runs any task work, so a worker created from there only ever gets to exit again, and io_should_retry_thread() doesn't retry -EINTR. Clearing PF_POSTCOREDUMP for the new thread in copy_process() was the other option. It makes the worker a thread like any other, but it only helps while the dump hasn't started. A worker born after zap_process() has run is invisible to it whatever its flags say and still decrements threads_remaining on the way out. Refusing to create it covers both, and then no task is ever born with the flag, so there is nothing to clear. Moving io_uring_files_cancel() ahead of synchronize_group_exit() closes the same window. It runs the cancellation, and whatever that can block on, before the thread announces itself to the dumper. A thread that blocks there never reaches coredump_task_exit() at all, so the dumper ends up waiting for a thread that never parks. Refusing the creation leaves the cancellation where it is. But it's very ugly to run io_uring work even before we did all the generic exit work. | ||||
| CVE-2026-99562 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject FSCTL_SET_ZERO_DATA on a directory handle An authenticated client with a writable tree connection can open a directory with FILE_WRITE_DATA and send FSCTL_SET_ZERO_DATA on that handle. The handler only checks fp->daccess & FILE_WRITE_DATA_LE, but on a directory FILE_WRITE_DATA is the legitimate add-file right, so the check passes. ksmbd_vfs_zero_data() then calls kernel_write() on the directory file, which has no FMODE_WRITE, and __kernel_write_iter() hits WARN_ON_ONCE(!(file->f_mode & FMODE_WRITE)), panicking a panic_on_warn kernel. Before commit 25e414db7033 ("ksmbd: report holes in allocated range queries") the dense-file path used vfs_fallocate(), which rejects directories with -EISDIR. The kernel_write() loop that replaced it has no such check. Reject a directory handle in ksmbd_vfs_zero_data() before writing, as ksmbd_vfs_write() already does for SMB2_WRITE. WARNING: fs/read_write.c:608 at __kernel_write_iter+0x74b/0x8c0 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: kernel_write+0x1ef/0x4d0 ksmbd_vfs_zero_data+0x413/0x590 smb2_ioctl+0x21fa/0x66a0 handle_ksmbd_work+0x61b/0x1ff0 | ||||
| CVE-2026-99563 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release failed pending sockets of a listener A child of a listener only left the listen.pending or listen.ready list via smbdirect_socket_accept() or when the listener was destroyed. So every connection that failed before it was accepted (negotiate timeout, peer disconnect, invalid negotiate request, ...) stayed on the list and counted against the backlog until the listener was destroyed. After about backlog (10 for ksmbd) such connections smbdirect_listen_connect_request() rejected every new connection with -EBUSY, so an unauthenticated peer was able to permanently stop ksmbd from accepting SMB-Direct connections. Now a failed child moves itself to a new listen.orphaned list at the end of smbdirect_socket_cleanup_work(), after the disconnect was started, and queues listen.purge_orphaned_work, which releases it with smbdirect_socket_release(), without holding the listener's rdma_lock_handler() lock, in the same way smbdirect_socket_destroy() does for the remaining children. Orphaned sockets still count against the backlog until they are released. sc->accept.listener is now only changed under listener->listen.lock and whoever clears it is responsible for releasing the socket: smbdirect_socket_accept(), purge_orphaned_work or the destroy of the listener. In order to make that work: - a struct smbdirect_socket that is a listener is now freed via kfree_rcu(), so that a child can dereference sc->accept.listener under rcu_read_lock(), even if the listener is released concurrently. - smbdirect_listen_connect_request() adds nsc to the listen.pending list and sets nsc->accept.listener before it calls smbdirect_accept_connect_request(), and always returns 0 so the rdma_cm core keeps the connection id and nsc owns it. On a non-zero return it schedules nsc's teardown with smbdirect_socket_schedule_cleanup(), which orphans it off the listener so that purge_orphaned_work releases it; nsc destroys its own connection id with rdma_destroy_id() in that teardown. The teardown has to be deferred because the rdma_cm core holds nsc's id_priv->handler_mutex across the handler, so nsc->rdma.cm_id must not be destroyed synchronously from here. That same handler_mutex (and the listener's) also guarantees nsc can't go away under us, so setting the listener before the call is safe and lets a failure orphan nsc. - smbdirect_accept_negotiate_recv_work() no longer moves a socket to the ready list if it already failed or no longer belongs to the listener. Every accepting socket has a listener, so if sc->accept.listener is already cleared, it no longer sends a negotiate response, as the socket is about to be released. - smbdirect_socket_destroy() of the listener disables purge_orphaned_work and also releases the orphaned sockets. | ||||
| CVE-2026-99564 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: don't wait for RDMA_CM_EVENT_DISCONNECTED in smbdirect_socket_destroy_sync() smbdirect_socket_destroy_sync() waited for RDMA_CM_EVENT_DISCONNECTED after smbdirect_socket_cleanup_work() called rdma_disconnect(). That can take very long, e.g. if the peer just disappeared, until the rdma cm gives up, or forever if the event already happened, but the status was overwritten afterwards. This is not needed: smbdirect_socket_destroy() drains the qp under rdma_lock_handler(), destroys it and calls rdma_destroy_id(), which only waits for a currently running event handler and makes sure no further events are delivered. The rest of the disconnect protocol (DREQ/DREP and timewait for IB, abrupt close for iWarp) is handled by the rdma core asynchronously. drivers/nvme/host/rdma.c also just calls rdma_disconnect() and ib_drain_qp() before rdma_destroy_id(). So smbdirect_socket_destroy() now also accepts SMBDIRECT_SOCKET_DISCONNECTING and changes the status to SMBDIRECT_SOCKET_DISCONNECTED itself under rdma_lock_handler(). We could still get RDMA_CM_EVENT_DISCONNECTED in the small windows between rdma_unlock_handler() and rdma_destroy_id(), but in that case smbdirect_connection_rdma_event_handler() is basically a no-op. | ||||
| CVE-2026-99565 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: wait for negotiation before receiving another PDU The receive thread queues a request and can read the next PDU before the negotiation worker finishes. While need_neg is set, the next PDU can cause ksmbd_init_smb_server() to replace conn->ops. A pipelined SMB2 request can therefore make the worker handle an earlier, shorter SMB1 request with SMB2 operations and read beyond its buffer. An SMB1 multi-protocol negotiate may be followed by an SMB2 NEGOTIATE that changes conn->ops again. Wait for work queued while the connection is new or needs negotiation to complete before reading another PDU. This keeps the operations stable for both stages of negotiation without changing when need_neg is cleared. | ||||
| CVE-2026-120753 | 1 Eclipse | 1 Eclipse Ditto | 2026-11-20 | N/A |
| In Eclipse Ditto versions 1.1.0 to 3.9.8, when pre-authentication is enabled, the gateway service accepts the pre-authenticated subject not only from the `x-ditto-pre-authenticated` HTTP header set by a trusted reverse proxy, but also from an undocumented `x-ditto-pre-authenticated` URL query parameter that a client can set. A reverse proxy that only overwrites the header therefore does not stop clients from supplying their own subject. With the default configuration of the Ditto Helm chart (`global.jwtOnly: false`, which implicitly enables pre-authentication), the bundled nginx skips HTTP Basic authentication for any request with an `Authorization: Bearer` header and forwards it without the pre-authentication header. An unauthenticated remote attacker can send an invalid Bearer token together with the query parameter to authenticate as any chosen policy subject. Pre-authentication succeeds before the JWT is validated, so the attacker can read and modify Things and Policies with that subject's permissions. As a mitigation, disable pre-authentication in the gateway (`ENABLE_PRE_AUTHENTICATION=false`) or, when using the Helm chart, configure `global.jwtOnly: true`. | ||||
| CVE-2026-99695 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: find the xattr entry again after converting a block to a bucket ocfs2_xattr_create_index_block() turns a non-indexed xattr block into a tree by copying it into a bucket, and the copy sorts the entries: a block holds them in insertion order, a bucket by name hash. ocfs2_xattr_update_xattr_search() nevertheless relocates the caller's search by the index the entry had in the block, so unless the two orders agreed it points at an unrelated entry, and nothing between there and the write compares that entry's name with the one being set. Setting an xattr whose new value no longer fits the block arrives here with xs->not_found clear. The block gave up because ocfs2_xa_block_can_reuse() wants an exact namevalue size match, while ocfs2_xa_bucket_can_reuse() only wants an entry at least as large as the new one, so the bucket accepts a pair the block rejected and the update lands on whichever entry the sort left at that index. Equal padded name lengths get that other attribute's value replaced in place and its name left alone, so setxattr returns success while the attribute asked for keeps its old value. A longer one trips ocfs2_xa_reuse_entry()'s BUG_ON, and a shorter one is refused by the bucket as well, so ocfs2_xa_prepare_entry() wipes the entry and writes the new name over it, leaving xe_name_hash describing a name that is no longer there. Find the entry again by the name being set, matching the type as well. The copy carries every entry and every name over unchanged, and (type, name) pairs are unique within a block, so the match is exact. The type matters because the handlers strip their prefix before calling ocfs2_xattr_set(), so user.foo and trusted.foo share a stored name, a stored length and a hash, and both can sit in the same block. The name has to come from xi rather than from xs->here: a failed set can remove the entry xs->here names, and only the "growing" caller sets ctxt->set_abort, which is what stops the conversion. Scan every entry rather than narrowing on the hash the way ocfs2_find_xe_in_bucket() does, since an existing entry keeps the hash it was stored under, which a kernel that sign-extended the name bytes made different from the one computed now. An empty result means the entry did not survive the failed set and this has become an insert; leaving xs->here alone would keep it pointing into the block, which is rewritten as a tree root before the caller reads it again. | ||||
| CVE-2026-99718 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (peci/dimmtemp) Fix devres leak and UAF on concurrent unbind When a peci_dimmtemp device is unbound concurrently with its delayed initialization work (detect_work), newly allocated devm resources and the hwmon device are leaked, leading to a use-after-free when reading the lingering hwmon sysfs attributes. In peci_dimmtemp_probe(), detect_work is registered for cancellation via devm_delayed_work_autocancel(). During driver detach, devres_release_all() first moves all existing entries from dev->devres_head onto a local todo list before invoking their release callbacks in reverse order. If create_dimm_temp_info_delayed() is already running when devm_delayed_work_drop() calls cancel_delayed_work_sync(), create_dimm_temp_info() can allocate dimmtemp_label strings via devm_kzalloc()/devm_kasprintf() and register the hwmon device via devm_hwmon_device_register_with_info(), appending new devres entries to the now-empty dev->devres_head. Once the work finishes, devres_release_all() frees priv and priv->name from the local todo list without re-evaluating dev->devres_head, leaving the late devres allocations and registered hwmon device behind with a dangling priv pointer. Cancel detect_work synchronously in a driver .remove() callback instead of relying on devm_delayed_work_autocancel() so that the work is fully drained before devres_release_all() detaches dev->devres_head, allowing any devm resources registered by the delayed work to be released in proper reverse order. Also only schedule detect_work when check_populated_dimms() returns -EAGAIN so that probe failure paths do not leave delayed work pending. | ||||
| CVE-2026-99719 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm87) Fix drvdata type confusion in vrm_show() and vrm_store() When an LM87 or ADM1024 device is probed with VID support enabled, reading from or writing to the vrm sysfs attribute triggers a driver data type confusion in vrm_show() and vrm_store() in drivers/hwmon/lm87.c. In lm87_probe(), the driver stores the struct lm87_data pointer on the I2C client via i2c_set_clientdata() and passes the struct i2c_client pointer as the drvdata argument to devm_hwmon_device_register_with_groups(), which attaches the attribute groups to the registered hwmon device with client as its driver_data. Unlike the other sysfs callbacks that retrieve client via dev_get_drvdata() and then obtain data via i2c_get_clientdata(), vrm_show() and vrm_store() assign dev_get_drvdata(dev) directly to struct lm87_data *. Dereferencing data->vrm therefore accesses the struct i2c_client instance at offsetof(struct lm87_data, vrm), causing vrm_show() to leak an unrelated byte from struct i2c_client to userspace and vrm_store() to corrupt a byte within struct i2c_client while failing to update the actual VRM value. Fix the problem by assigning the return value from dev_get_drvdata(dev) to struct i2c_client *client and using i2c_get_clientdata() to get the actual client data. | ||||
| CVE-2026-99720 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: chipcap2: fix IRQ teardown ordering The threaded IRQs are currently requested before the hwmon device is registered. Since devres releases resources in reverse order, the hwmon device is unregistered before the IRQs are freed during driver teardown. An IRQ may therefore still run after the hwmon device has been released and access the stale data->hwmon pointer. Separate IRQ discovery from IRQ registration so that the IRQ numbers and alarm visibility flags are initialized before registering the hwmon device while the IRQs are released before the hwmon device during devres cleanup. | ||||
| CVE-2026-99721 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (aquacomputer_d5next) reject short status reports The HID raw_event callback runs before HID core validates the received report length. aqc_raw_event() reads device-specific status fields at fixed offsets, including multi-byte values, without first ensuring that the received buffer contains every field. A truncated report can therefore cause out-of-bounds reads and update hwmon state with unrelated data. The required length differs between supported devices and cannot be derived from the HID report descriptor. Define the minimum length needed by each asynchronous status format, select it while configuring the device, and reject reports that do not contain the last field accessed by that format. Keep the published length zero until probe configuration is complete, which also excludes legacy devices whose status is retrieved through feature reports. | ||||
| CVE-2026-99726 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Widen cache_clean_lock over the whole L2TCACTL sequence v3d_clean_caches() and v3d_flush_l2t() both write the single L2TCACTL register and poll its status bits. The mutex cache_clean_lock exists to serialize them, but v3d_clean_caches() only took the lock around its final FLM_CLEAN write. These functions run concurrently: v3d_flush_l2t() is issued from the BIN/RENDER/CSD invalidate path while v3d_clean_caches() runs from the CACHE_CLEAN queue, and each queue's scheduler uses its own ordered workqueue, so their run_job callbacks execute in parallel. Because clean locked only its final write, a concurrent flush can write L2TCACTL during clean's unlocked phase. Both use non read-modify-write writes to the one register, so whichever lands last wins: clean's TMUWCF write can land on the flush's in-flight L2TFLS invalidate, triggering the GFXH-1897 hazard of writing L2TCACTL while a flush is pending. Hold cache_clean_lock across the entire L2TCACTL access sequence so it is fully mutually exclusive with v3d_flush_l2t(), which already takes the lock around its own write. | ||||
| CVE-2026-101340 | 2026-11-20 | N/A | ||
| Net::DNS uses a 16-bit query ID to match responses to the corresponding requests. In versions up to and including 1.57, the ID is obtained from Perl's built-in rand() function. An attacker that can observe the sequence of query IDs is able to expose the internal state of the PNRG and hence predict query IDs before they are transmitted. The victim Net::DNS instance is then exposed to forged responses injected by the attacker. Note that the deduplication cache in 1.57 has no impact on the feasibility of this attack. | ||||
| CVE-2026-130669 | 1 Imagemagick | 1 Imagemagick | 2026-11-20 | 3.3 Low |
| ImageMagick before 7.1.2-35 contains a null pointer dereference vulnerability that allows attackers to crash the process by using the -subimage option on a single-image list. Attackers can supply input producing an image list with only one image while -subimage is applied, causing a denial of service. | ||||
| CVE-2026-129420 | 2026-11-20 | N/A | ||
| Joomla Extension - joomlatools.com - Local file read through remote document links in DOCman extension < 6.2.2 - Remote document links accepted the file:// scheme, allowing users with permission to create or edit documents to download arbitrary local files from the server, such as the Joomla configuration file. | ||||
| CVE-2026-133606 | 1 Powerjob | 1 Powerjob | 2026-11-20 | 5.3 Medium |
| A weakness has been identified in PowerJob up to 5.1.7. This affects the function CustomHttpServletRequestWrapper of the file powerjob-server/powerjob-server-starter/src/main/java/tech/powerjob/server/config/CachingRequestBodyFilter.java of the component CachingRequestBodyFilter. Executing a manipulation can lead to denial of service. It is possible to launch the attack remotely. | ||||
| CVE-2026-111517 | 1 Dell | 1 Alienware Command Center | 2026-11-20 | 4.4 Medium |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.105.0, contain a Deserialization of Untrusted Data vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Arbitrary Code Execution. | ||||
| CVE-2026-111516 | 1 Dell | 1 Alienware Command Center | 2026-11-20 | 6.6 Medium |
| Dell Alienware Command Center (AWCC), versions prior to 6.14.105.0, contain a Least Privilege Violation vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privilege and Denial of Service. | ||||