Export limit exceeded: 429943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 429943 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429943 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-132893 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 7.7 High |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 an SSRF via pipeline repository branch listing was possible | ||||
| CVE-2026-132894 | 1 Jetbrains | 1 Teamcity | 2026-11-20 | 7.7 High |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 an SSRF in AWS connection settings could expose server credentials | ||||
| CVE-2026-99703 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix mremap deadlock when PMD sharing is possible move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for write while moving hugetlb PTEs. This prevents races with truncation and protects huge_pmd_unshare(), but the move loop must not call helpers that can acquire the same rwsem for read. huge_pte_alloc() can do that when the destination can use PMD sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for read while searching for a shareable PMD table. Calling it while the move path already holds i_mmap_rwsem for write can deadlock. Avoid that path for PMD-sized hugetlb mappings that can use PMD sharing. Instead of allocating or sharing the destination page table while moving, zap the source range and let the destination fault path populate or share the PMD lazily. Reuse the hugetlb unmap logic for the source-side zap by splitting the core loop out of __unmap_hugepage_range(). The wrapper keeps the existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush() behavior, while move_hugetlb_page_tables() can reuse the unmap loop with its existing mmu_gather. | ||||
| CVE-2026-99711 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry Add a missing "break" in the inner for-loop of the open coded mess that unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails due to a consistency check that is caught by hardware but missed by KVM. I.e. move on to the next MSR in the VM-Entry load list after performing a write using a value found in the VM-Exit load list. Processing *every* matching entry in the VM-Exit load list makes the processing quadratic, which is problematic if the load lists are full of MSRs that are expensive to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and a whole pile of unnecessary work. Functionally, arbitrarily restoring the value of the first matching entry is "fine", because none of this is architecturally correct: the load lists are never supposed to have been used in the first place. In practice, it's likely a moot point as no well-behaved VMM will have multiple, diverging entries in the load lists. | ||||
| CVE-2026-99729 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/rmap: handle device-exclusive entries in folio_referenced_one() page_vma_mapped_walk() can return non-present device-exclusive entries, but folio_referenced_one() passes them to PTE young-bit accessors that require present PTEs. We must neither call clear_flush_young_ptes_notify() nor folio_pte_batch() with non-present entries. For example, clearing the young bit on non-present PTEs can corrupt the entry: on arm64 PTE_AF overlaps the swap type, so clearing it turns a device-exclusive entry into an ordinary swap entry. folio_pte_batch() will VM_WARN_ON_FOLIO. Apply the same approach as the previous fixes to e.g., damon_ptep_mkold(): treat these entries as old from the CPU's perspective and obtain their young state through the MMU notifier. Skip PTE batching and MGLRU look-around for non-present entries, and don't modify non-present PTEs. | ||||
| CVE-2026-99776 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: clear stale client pointer on close p9_usbg_close() tears down the client transport, but usb9pfs keeps using usb9pfs->client from asynchronous TX and RX completion handlers. A late completion can therefore dereference a client that has already been freed during mount teardown. Clear usb9pfs->client under usb9pfs->lock when closing the transport, detach any pending TX request from in_req->context, and make the TX/RX completion handlers bail out once the transport has been detached. This keeps late completions from touching a freed or rebound p9_client. | ||||
| CVE-2026-99779 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: call disable_usb9pfs() from usb9pfs_disable() usb9pfs_disable() is the usb_function ->disable callback, invoked by the composite gadget core whenever the host resets or unconfigures the gadget. The gadget function API requires this callback to disable its endpoints; every other in-tree function driver does so from its ->disable hook. usb9pfs_disable() never called disable_usb9pfs(), so the IN/OUT endpoints and their usb_request objects were left active and allocated across a host-driven disable. When the host later reconfigures the device, enable_usb9pfs() calls alloc_requests() again and unconditionally overwrites usb9pfs->in_req/out_req, permanently leaking the previous allocations, while the endpoints themselves are left enabled underneath the function's own idea of being disabled. Call disable_usb9pfs() before reinit_completion(&usb9pfs->send), mirroring the same sequence already used in p9_usbg_close(). Placing it before the reinit_completion() also ensures usb_ep_disable() has synchronously flushed any requests still queued in hardware before the completion is reset, closing the same race that motivated resetting the completion here in the first place. | ||||
| CVE-2026-99781 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: set client to Disconnected on usb9pfs_disable This patch is setting the client status to Disconnected, when the client is still in use. Otherwise a disconnected usb cable would run any use of the mount to faults. | ||||
| CVE-2026-99782 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/9p/usbg: also disable endpoints on p9_usbg_close The close function has to fully reverse the state change of 9p_create (mount) and the potential call of set_alt(1). This includes to ensure that the usage of the endpoints is not active any more. | ||||
| CVE-2026-99785 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_virtio: reject mount tags longer than NAME_MAX at probe p9_virtio_probe() reads a 16-bit mount tag length (tag_len) from the device config and kzalloc()s tag_len + 1 bytes for chan->tag with no upper bound. A malicious or compromised host can present a tag of up to 65535 bytes; that tag is later copied into the single-page sysfs buffer by p9_mount_tag_show() (memcpy(buf, chan->tag, tag_len + 1)), a host-controlled out-of-bounds write of up to ~64 KiB past the PAGE_SIZE attribute buffer. Reject an overlong tag at probe time. A 9p mount tag is a name-like identifier, so bound it by NAME_MAX (255): that limit is independent of the sysfs/seq_file page size and is far above any legitimate mount tag, which keeps p9_mount_tag_show() safe at the root without hard-coding a seq_file implementation detail. | ||||
| CVE-2026-99786 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: retry inexact policy lookup after node reinsertion An inexact policy lookup first records pointers to candidate hlist heads and then traverses the lists. A concurrent policy insertion can merge inexact tree nodes between those operations: lookup policy insertion ------ ---------------- find inexact candidates save obsolete hlist head write_seqcount_begin(&bin->count) merge inexact tree nodes hlist_del_rcu(&policy->bydst) reinsert policy->bydst in survivor write_seqcount_end(&bin->count) evaluate saved candidate list miss the moved policy The merge immediately reinserts the same hlist node into the surviving tree node. RCU keeps the policy alive, but it does not provide a consistent view while its list node is moved. A lookup that selected the obsolete list can observe it empty. A lookup already traversing a moved policy can instead follow the next pointer rewritten by the reinsertion. Either case can return an incorrect IPsec policy result. The per-bin sequence counter already brackets calls to xfrm_policy_inexact_insert_node(), including node merges. The read side, however, currently validates the counter only while searching an individual rb-tree. A successful search returns without validation, and the later candidate-list traversal is outside that read-side section. Snapshot the per-bin sequence before discovering candidate heads and validate it after evaluating all candidate lists. Retry the lookup if the inexact policy tree changes while it is being searched. | ||||
| CVE-2026-99787 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Select the frequency-invariance callback per CPU cppc_cpufreq_cpu_fie_init() initializes deferred work only for CPUs whose feedback counters use PCC. However, if any CPU in a shared policy uses PCC, it installs the PCC tick callback for the entire policy. With FIE enabled, a non-PCC CPU then queues an uninitialized irq_work and can call a NULL function pointer when that work runs. Choose the frequency-invariance callback separately for each CPU using the recorded work-initialization state. Processor removal can unpublish the CPC descriptor before callback registration, so querying its counter transport again can incorrectly select direct reads for a PCC CPU. Register the callbacks after all counter initialization has completed, so a failed initial read for an online CPU cannot leave a partially registered policy. PCC CPUs use their initialized deferred work, while non-PCC CPUs read their own counters directly from the tick. | ||||
| CVE-2026-133855 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| flowintel contains an information disclosure vulnerability in its case history feature. When a user views the history of a case they are authorized to access, the history output includes references to other cases (linked, unlinked, or forked) without verifying whether the requesting user has permission to view those referenced cases. This exposes the identifiers and titles of cases that the user should not be able to discover. The vulnerability affects multiple output paths: - Browser-based case history view - API history endpoint - Plain-text history download - Markdown history download - Report timeline generation An authenticated user with access to any single case can enumerate the existence and identifiers of other cases by reading the history of a case they can access. This bypasses the intended per-case access control model and may reveal the existence of sensitive investigations, their identifiers, and associated metadata to unauthorized users. The raw audit storage is not modified; the issue is solely in the presentation layer failing to filter references to inaccessible cases before returning history data to the user. Affected versions: flowintel prior to 4.1.0. | ||||
| CVE-2026-133854 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| flowintel contains a vulnerability in the case and task classification usage endpoints that allows authenticated users to view classification data associated with cases they do not have permission to access. The affected endpoints, which provide lists of used taxonomies, tags, galaxies, clusters, and custom tags, did not properly enforce object-level access controls. While the endpoints required authentication, they failed to filter the returned data based on the requesting user's visibility permissions for the underlying cases. This allowed any authenticated user to enumerate classification usage across all cases, including private or restricted cases belonging to other organizations or users. This issue could lead to the disclosure of sensitive information, such as the existence of specific cases, the types of threats or indicators associated with them, and the relationships between different classification elements, potentially aiding an attacker in reconnaissance or targeting. Affected versions: < 4.1.0 | ||||
| CVE-2026-126334 | 1 Phoenixframework | 1 Phoenix Live View | 2026-11-20 | N/A |
| Incorrect Authorization vulnerability in phoenixframework phoenix_live_view allows an authenticated user to mount a router-mounted LiveView without the on_mount hooks of its live_session via a phx_join message that carries neither a "url" nor a "redirect" key. The catch-all clause of the private Phoenix.LiveView.Channel.authorize_session/3 in lib/phoenix_live_view/channel.ex accepts a join without a URL for any session, including a root LiveView mounted at the router. The channel then mounts the LiveView with no route, and only a route adds the live_session hooks to the mount lifecycle. Checks that those hooks perform on the connected mount do not run, and event checks that they attach through attach_hook/4 are never attached. The attacker needs a valid session token for the LiveView, which only the HTTP render issues, after the hooks pass there. on_mount hooks declared in the LiveView module still run. This issue affects phoenix_live_view: from 0.16.0 before 1.0.20, from 1.1.0-rc.0 before 1.1.34, and from 1.2.0-rc.0 before 1.2.14. | ||||
| CVE-2026-133853 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| FlowIntel's chatbot component used a single shared MCP (Model Context Protocol) session and process-wide environment variable to pass per-user API credentials to a child process. Because the session and the ambient FLOWINTEL_API_KEY environment variable were shared across all concurrent requests, a user's authenticated identity could be applied to another user's tool invocation, or a stale/ambient credential could be inherited by a new request. Preconditions: - An authenticated user with access to the chatbot interface. - Concurrent or overlapping chatbot tool invocations from different users, or a request made after another user's credentials were written to the process environment. Impact: - A lower-privilege user could read data belonging to a higher-privilege user (e.g., private investigation cases). - A user whose session was invalidated (deleted, password changed, key revoked) could still operate under a previously cached ambient credential. - The parent process environment was mutated with user-specific secrets, creating a persistent credential leak surface. Affected versions: FlowIntel prior to 4.1.0. | ||||
| CVE-2026-95974 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-20 | 7 High |
| Heap-based buffer overflow in Windows Graphics Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-127027 | 1 Analogic | 1 Poste.io | 2026-11-20 | N/A |
| Poste.io is vulnerable to remote code execution in DMARC report processing. Email sent to dmarc-reports@<domain> is saved without sender verification. Script that runs as root unpacks the attachments using unsafe shell commands, allowing command injection through crafted attachments (e.g. file names or archive contents). A remote unauthenticated attacker who can send an email to the server's port 25 can execute arbitrary commands as root within the Poste.io container. This issue was fixed in version 2.5.22. | ||||
| CVE-2026-95975 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-20 | 8.8 High |
| Heap-based buffer overflow in Windows Performance Counters allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-133852 | 1 Flowintel | 1 Flowintel | 2026-11-20 | N/A |
| flowintel is a case management application that enforces an approval workflow for tasks in privileged cases. Tasks in such cases are required to start in a Requested status, meaning they must receive explicit approval before becoming active. A logic flaw in the task-creation path allowed tasks to be initialized with a Created status (bypassing the approval step) in two scenarios: - When a task was created from a template and no acting user was supplied, the privileged-case check was skipped entirely, leaving the task in Created status. - When a case was created from a template, all copied tasks were unconditionally assigned the Created status regardless of the case's privileged designation. An authenticated user with the ability to create tasks from templates or to instantiate cases from templates could therefore place tasks directly into an active state within privileged cases, circumventing the intended approval gate. This may expose restricted case content or permit actions that should require supervisory sign-off. Affected versions: flowintel prior to 4.1.0. | ||||