Export limit exceeded: 429361 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26480 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26480 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99432 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: hold the lookup reference across convert AST enqueue dlm_convert_lock_handler() drops the reference it took when it found the lock on res->granted at its leave label, one statement before it calls dlm_queue_ast(). dlm_free_dead_locks() takes res->spinlock and drops the list and base references, so a peer death landing in that gap leaves the handler's own put as the one that frees the lock, and __dlm_queue_ast() then reads lock->lockres from freed memory. The handler is registered next to dlm_create_lock_handler(), so a convert message buffered on a dying peer's socket arrives on the same o2net receive work that o2net_disconnect_node() does not wait for. The two can interleave as follows, with the reference counts as they are before this fix: Socket data-ready Node-down thread Receive worker ----------------- ---------------- -------------- o2net_data_ready() select sc under callback read lock o2net_disconnect_node() queue shutdown begin flush; new color queue sc_rx_work in the new color release callback lock shutdown socket flush returns read buffered convert_lock dlm_convert_lock_handler() find lock on res->granted dlm_lock_get() refs = 3 lock res->spinlock __dlmconvert_master() call_ast = 1 unlock res->spinlock DLM node-down cleanup lock res->spinlock dlm_free_dead_locks() unlink lock put list ref refs = 2 put base ref refs = 1 unlock res->spinlock dlm_lock_put() refs = 0 free lock dlm_queue_ast() __dlm_queue_ast() read lock->lockres (use-after-free) __dlmconvert_master() only moves the lock between lists, so the count entering the gap is base, list and lookup. Drop the lookup reference after the AST is queued instead of before it and the race ends with the one __dlm_queue_ast() took, which dlm_flush_asts() releases later with ast_pending cleared and ast_list unlinked. No extra get is needed, and the normal case ends with the same count as before. dlmconvert_master() has the same shape but is only reached from dlmlock() for a lock this node owns, which dlm_free_dead_locks() never matches. | ||||
| CVE-2026-99431 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: cancel quota sync work before freeing quota info OCFS2 quota info owns dqi_sync_work and must outlive both its timer and qsync_work_fn(). ocfs2_local_free_info() frees that owner without cancelling the work, relying on the quota suspend/disable wrappers. Loading quotas on a read-only to read-write remount can successfully queue the work in ocfs2_global_read_info() and then fail while attaching a dquot to an existing inode in add_dquot_ref(). The quota core unwinds that failure directly through dquot_disable(), bypassing the OCFS2 wrapper: Remount task (s_umount write) Timer/workqueue ocfs2_global_read_info() schedules dqi_sync_work add_dquot_ref() returns an error dquot_disable() ocfs2_local_free_info() frees oinfo delayed-work timer expires qsync_work_fn() reads oinfo The timer core can then write to the freed embedded timer, or qsync_work_fn() can read oinfo->dqi_gqinode before its s_umount trylock. The outer ocfs2_disable_quotas() cleanup skips the failed type because dquot_disable() has already cleared its loaded state. Cancel dqi_sync_work synchronously at the start of ocfs2_local_free_info(), before dropping the global inode or freeing any owner state. The work is initialized whenever read_file_info() succeeds. dquot_disable() holds s_umount for write, so the callback skips its quota scan via down_read_trylock() and can finish without waiting for teardown. The synchronous cancel also handles its self-rearm. KASAN report as below: BUG: KASAN: slab-use-after-free in __run_timers+0x9e9/0xa10 Write of size 8 at addr ffff888111b0aad0 by task swapper/3/0 Call Trace: <IRQ> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? __run_timers+0x9e9/0xa10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? __run_timers+0x9e9/0xa10 kasan_report+0xe0/0x110 ? __run_timers+0x9e9/0xa10 __run_timers+0x9e9/0xa10 ? __pfx___run_timers+0x10/0x10 ? __lock_acquire+0x5a3/0x2140 ? __pfx_do_raw_spin_lock+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 timer_expire_remote+0xfa/0x160 ? __pfx_timer_expire_remote+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x160 tmigr_handle_remote_up+0x4ba/0x9d0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? tmigr_handle_remote+0x21a/0x340 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups_from+0x5a/0x160 tmigr_handle_remote+0x24f/0x340 ? __pfx_tmigr_handle_remote+0x10/0x10 ? lock_acquire+0x190/0x300 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0xc8/0x290 run_timer_softirq+0x222/0x270 ? __pfx_run_timer_softirq+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0xb8/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 handle_softirqs+0x1fa/0x8d0 ? __pfx_handle_softirqs+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock+0x23/0x40 ? srso_alias_return_thunk+0x5/0xfbef5 ? __hrtimer_rearm_deferred+0x1fb/0x5d0 __irq_exit_rcu+0x113/0x1e0 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 ? ct_kernel_exit.constprop.0+0xc5/0xf0 ? do_idle+0x3ae/0x650 default_idle+0x9/0x10 default_idle_call+0x6c/0xb0 do_idle+0x3ae/0x650 ? cpuhp_online_idle+0x9c/0xb0 ? __pfx_do_idle+0x10/0x10 ? __entry_text_end+0x1020f6/0x1020f9 ? lockdep_hardirqs_on_prepare+0xeb/0x1a0 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on+0x18/0x160 ? srso_a ---truncated--- | ||||
| CVE-2026-99430 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix chunk number of the first chunk in a local quota file Mounting a crafted OCFS2 image can corrupt kernel memory. When the local quota file header of such an image claims zero chunks, the first quota entry allocated during the mount gets a chunk number taken from a kernel pointer, and releasing that entry clears a bit far outside the chunk bitmap. The write will corrupt the data stored at that address, and the corruption may lead to a system crash or damage unrelated data. Mounting requires CAP_SYS_ADMIN, so it takes an untrusted image, such as removable media or a loop mount of a file from elsewhere. Since the chunk number comes from a kernel pointer, the address of the bit that gets cleared differs from boot to boot, and the issue has been reported under several titles: - BUG: unable to handle kernel paging request in ocfs2_local_release_dquot - KASAN: use-after-free Write in ocfs2_local_release_dquot - KASAN: slab-out-of-bounds Write in ocfs2_local_release_dquot - KASAN: slab-use-after-free Write in ocfs2_local_release_dquot - KFENCE: use-after-free write in ocfs2_local_release_dquot Note that none of these is a use-after-free in the quota code: the chunk and its buffer head are alive. The bit that gets cleared lies far outside the bitmap. KASAN and KFENCE name each report based on the object occupying that address, which explains why the same issue is reported under so many different titles. In the report I sent, the address fell in a free page, which KASAN labels use-after-free. There are known reproducers. Both a syzkaller and a C reproducer are available from the Google Drive link [1] in my report thread. The issue was found by our modified syzkaller, not a theoretical thing found by an LLM. I have not seen it outside fuzzing, so it is not affecting me in the real world. The local quota file in OCFS2 is divided into chunks, and each chunk begins with a header block holding a bitmap of the quota entries that chunk has handed out. Chunks are numbered from zero, and that number is used to convert the file offset of an entry back into a bit position in the bitmap. ocfs2_local_quota_add_chunk() appends a new chunk to the in-memory list and numbers it one past the chunk that was last: list_add_tail(&chunk->qc_chunk, &oinfo->dqi_chunk); chunk->qc_num = list_entry(chunk->qc_chunk.prev, struct ocfs2_quota_chunk, qc_chunk)->qc_num + 1; The predecessor is looked up after the new chunk is added to the list, so if the list was empty, the prev pointer is the list head itself. The head is the dqi_chunk member of struct ocfs2_mem_dqinfo and is not a chunk, so reading qc_num through it lands 16 bytes past the start of the head, on the dqi_gqinode pointer that follows it. The first chunk of the file is then numbered with the lower half of a kernel pointer instead of 0. The list is empty when the local quota file header claims the file has no chunks. ocfs2_local_read_info() takes dqi_chunks from that header without validating it, so an image with dqi_chunks == 0 takes this path when the first quota entry is allocated. ocfs2_create_local_dquot() turns the bad number into a file offset with ol_dqblk_off(), which shifts a 32-bit block number left by the block size bits, so the top bits of such a large block number are lost. ocfs2_local_release_dquot() turns the offset back into a bit index with ol_dqblk_chunk_off(), using the full chunk number, so the lost bits push that index far outside the bitmap, and clearing it corrupts unrelated memory. Compute the chunk number before putting the chunk on the list, and use 0 when the list is empty. | ||||
| CVE-2026-99429 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: pin refcount trees before dropping the lookup lock A refcount tree returned to ocfs2_lock_refcount_tree() must stay alive until that caller releases its operation reference. However, ocfs2_get_refcount_tree() returns the cached pointer after dropping osb_lock, and the caller only takes its kref afterwards. The registry reference does not protect this gap from concurrent removal. This can happen when another node frees a refcount root and reuses its block with a different generation while this mount retains the old cached tree. Two local operations on different inodes sharing the new root, such as data CoW and an external xattr update, can then look up the same stale tree. Their inode locks are independent, and both the REFCOUNT DLM lock and rf_sem are acquired after the first operation reference. The following ordering is possible, with no other operation references: Data CoW Xattr update -------- ------------ Look up the old tree under osb_lock, then drop osb_lock Look up the same tree and take a kref Acquire the tree locks and read the new on-disk generation Erase the old tree under osb_lock Unlock and drop the operation kref Drop the registry kref, freeing tree Take a kref through the freed tree pointer The final kref_get() accesses freed rf_getcnt storage, and subsequent accesses in ocfs2_lock_refcount_tree() also use the freed allocation. Take the operation reference in ocfs2_get_refcount_tree() before releasing osb_lock, including when an insertion loses to another lookup. Removal must acquire the same lock, so it cannot drop the registry reference before the lookup has pinned the tree. Keep the existing unlock and error path puts. The two callers that already hold the refcount tree lock keep their borrowed lookup behavior and do not acquire an extra reference. KASAN report as below: BUG: KASAN: slab-use-after-free in ocfs2_lock_refcount_tree+0x94a/0x9b0 Read of size 4 at addr ffff888117212820 by task python3/497 [Kernel and hardware identification omitted.] Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 kasan_report+0xe0/0x110 ? ocfs2_lock_refcount_tree+0x94a/0x9b0 ocfs2_lock_refcount_tree+0x94a/0x9b0 ? __pfx_ocfs2_lock_refcount_tree+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? ocfs2_refcount_cow+0x3b6/0xd90 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kmalloc_cache_noprof+0x28d/0x610 ? ocfs2_refcount_cow+0x3b6/0xd90 ocfs2_refcount_cow+0x410/0xd90 ? __pfx_ocfs2_refcount_cow+0x10/0x10 ? __pfx___might_resched+0x10/0x10 ? down_write+0x11a/0x1f0 ? __pfx_down_write+0x10/0x10 ? ocfs2_inode_unlock+0x1a9/0x260 ? __pfx_ocfs2_inode_unlock+0x10/0x10 ? ocfs2_file_write_iter+0x1413/0x1d30 ocfs2_file_write_iter+0x157b/0x1d30 ? __pfx_ocfs2_file_write_iter+0x10/0x10 ? lock_acquire+0x190/0x300 ? __x64_sys_pwrite64+0x1b7/0x220 ? __pfx___might_resched+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? security_file_permission+0x26/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_is_held_type+0x8f/0x100 vfs_write+0x639/0x1010 ? __pfx_ocfs2_file_write_iter+0x10/0x10 ? lock_vma_under_rcu+0x154/0x4a0 ? __pfx_vfs_write+0x10/0x10 ? lock_release+0x121/0x290 ? srso_alias_return_thunk+0x5/0xfbef5 __x64_sys_pwrite64+0x1b7/0x220 ? __pfx___x64_sys_pwrite64+0x10/0x10 ? irqentry_exit+0xbe/0x820 ---truncated--- | ||||
| CVE-2026-99428 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: snapshot dentry names in file and setattr traces Patch series "ocfs2: stabilize dentry names in file and setattr traces", v4. Snapshot names at all six users of ocfs2__file_ops and at the separate setattr event. Patch 1 handles the five ordinary file-operation callers and setattr. Patch 2 handles release separately to preserve its locked open-count sample and take the snapshot outside that critical section. The release explanation distinguishes its existing RCU lifetime coverage from name/length consistency. It does not claim that the ordinary callers' external-name UAF interleaving crosses the held inode spinlock. The release source change is unchanged from v3. Patch 1 also removes the read callback's redundant NULL-inode check. The two patches apply independently and leave trace formats unchanged. This patch (of 2): The open, fsync, read, write and splice-read trace calls pass the live dentry name and length to the shared ocfs2__file_ops event class. ocfs2_setattr() passes the same unprotected arguments to its own event. Both events size and copy a __string field separately. A reference to the dentry does not pin the external storage backing an individual name. With an event enabled, a caller can be preempted after loading the name pointer. A long-to-short rename can then replace the name and reclaim its old external allocation before the trace callback sizes or copies it, provided no other snapshot retains that allocation. The setattr inode lock does not exclude every rename: a same-directory rename of a source directory need not take that directory's inode lock. It can therefore change the dentry name while setattr records its event. Inline names and separately loaded lengths can also change during trace record sizing and copying. Take a dentry name snapshot around each of these six trace calls and pass both the string and length from the snapshot. Check event enablement before taking a snapshot. Keep the event classes and formats unchanged. Also remove the redundant NULL-inode check in the read callback. file_inode() returns the open file's inode, which is already used by the trace call above the check. The historical report below is from the read path. KASAN report as below: BUG: KASAN: slab-use-after-free in strlen+0x85/0xa0 Read of size 1 at addr ffff88810a5b2b18 by task python3/496 [CPU and host details omitted.] Call Trace: <TASK> dump_stack_lvl+0x93/0xd0 print_report+0xce/0x630 ? strlen+0x85/0xa0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20e/0x420 ? strlen+0x85/0xa0 kasan_report+0xe0/0x110 ? strlen+0x85/0xa0 strlen+0x85/0xa0 trace_event_raw_event_ocfs2__file_ops+0xf0/0x480 ? __pfx_trace_event_raw_event_ocfs2__file_ops+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? pmbd_probe_hit_cookie+0xe7/0x1c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_pmbd_probe_hit_cookie+0x10/0x10 ocfs2_file_read_iter+0x6cd/0xb30 ? __pfx_ocfs2_file_read_iter+0x10/0x10 ? selinux_file_permission+0x11d/0x540 ? srso_alias_return_thunk+0x5/0xfbef5 ? security_file_permission+0x26/0x80 vfs_read+0x7d2/0xc20 ? __pfx_vfs_read+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_do_sys_openat2+0x10/0x10 ksys_read+0x111/0x200 ? __pfx_ksys_read+0x10/0x10 ? irqentry_exit+0xbe/0x820 ? srso_alias_return_thunk+0x5/0xfbef5 ? trace_hardirqs_on_prepare+0x11d/0x150 ? srso_alias_return_thunk+0x5/0xfbef5 do_syscall_64+0x114/0x620 entry_SYSCALL_64_after_hwframe+0x77/0x7f [User register dump omitted.] </TASK> Allocated by task 489: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x2de/0x780 __d_alloc+0x5fc/0x8c0 d_alloc_parallel+0x106/0x11d0 lookup_open+0x3ff/0 ---truncated--- | ||||
| CVE-2026-99427 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB last_entry pointer from unbounded LastNameOffset CIFSFindFirst() and CIFSFindNext() locate the last entry of a TRANS2_FIND_FIRST2 or TRANS2_FIND_NEXT2 response by adding the LastNameOffset of the response parameters to the start of the data area, and store the result in psrch_inf->last_entry. MS-CIFS 2.2.6.2.2 defines that offset as the offset of the entry's file name; the client follows the reading of NT and Samba servers, which point it at the entry. LastNameOffset is only checked against CIFSMaxBufSize, which says nothing about the response actually received: validate_t2() lets the data area start up to 1024 bytes into the buffer, and SendReceive() copies at most CIFSMaxBufSize + MAX_CIFS_HDR_SIZE bytes of a response, 16468 by default, into a cifs_request allocation of CIFSMaxBufSize + MAX_SMB2_HDR_SIZE bytes, 16588 by default. The pointer itself can therefore be placed anywhere from the end of the received data to 820 bytes past the end of the allocation. The read through that pointer is far larger than its displacement. find_cifs_entry() hands last_entry to cifs_save_resume_key() after every FindNext and after the FindFirst of a search rewind, and cifs_fill_dirent() takes the length of the name from the entry itself: a __le32 FileNameLength for most levels, a __u8 for SMB_FIND_FILE_INFO_STANDARD, and for SMB_FIND_FILE_UNIX the result of a scan for the terminating NUL over up to PATH_MAX + 1 UTF-16 units. The name is recorded as the resume name of the search, and the next CIFSFindNext() rejects only a recorded length of PATH_MAX or more before copying the name into the ResumeFileName of its request and sending it with the resume key taken from the same entry: up to 4 KiB of memory from past the end of the allocation leaks to the server, and for SMB_FIND_FILE_UNIX the NUL scan runs about twice as far before the length is even known. The entry does not have to lie outside the response for that either: a maximal response ends about 120 bytes before the end of the allocation, so an entry in its last bytes with a name just under PATH_MAX has nearly all of that name copied from past the allocation. It needs nothing unusual from the client: a FindNext response that reports no entries and does not end the search makes find_cifs_entry() send the next FindNext at once, carrying whatever was parsed at LastNameOffset, and a search rewind can do the same after its FindFirst. SMB1 is not negotiated by default: this takes a malicious or compromised server, a mount of it with an explicit vers=1.0, which CONFIG_CIFS_ALLOW_INSECURE_LEGACY (default y) permits, and a directory listing on that mount. With KASAN enabled, a response that places the last entry past the buffer, with a large DataOffset and a LastNameOffset near the end of its range, gives: ================================================================== BUG: KASAN: slab-out-of-bounds in cifs_save_resume_key.isra.0+0x7aa/0x7f0 Read of size 4 at addr ffff88807b55c33b by task ls/83 CPU: 1 UID: 0 PID: 83 Comm: ls Not tainted 7.3.0-rc4-00457-gf14572c203d5 #69 PREEMPT(lazy) Call Trace: <TASK> kasan_report+0xdf/0x1a0 cifs_save_resume_key.isra.0+0x7aa/0x7f0 cifs_readdir+0x1ed6/0x29c0 iterate_dir+0x1c0/0x570 __x64_sys_getdents64+0x133/0x270 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 83 on cpu 0 at 19.317556s: cifs_buf_get+0x36/0x90 smb_init+0x4f/0x110 CIFSFindNext+0xf7/0x14c0 cifs_readdir+0xf51/0x29c0 The buggy address belongs to the object at ffff88807b558000 which belongs to the cache cifs_request of size 16588 The buggy address is located 623 bytes to the right of allocated 16588-byte region [ffff88807b558000, ffff88807b55c0cc) ================================================================== The four bytes read there are the FileNameLength of the entry, which cifs_fill_dirent() tak ---truncated--- | ||||
| CVE-2026-99426 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: hold server info until cifsd exits The last session reference can be dropped while the cifsd demultiplex thread is still running clean_demultiplex_info(). That thread frees TCP_Server_Info there, racing with cifs_put_tcp_session() as it releases the server crypto state. syzbot reported a KASAN use-after-free in cifs_crypto_secmech_release(). Keep an object reference for the cifsd thread. Defer final crypto, session-key, network namespace, string, and structure cleanup until both the last session reference and the thread reference are dropped. Drop the thread reference after clean_demultiplex_info() has finished using the server. Build-tested with ARCH=arm64 and W=1 for fs/smb/client/connect.o. The KASAN reproducer was not run on the patched kernel. | ||||
| CVE-2026-99425 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: hold a reference on the parent in readdir Listing a directory on an overlay uses a freed dentry and crashes the kernel when a lookup moves the directory at the same time. Code that can sleep may only use d_parent without a reference while something stops a move of the dentry. ovl_iterate_real(), ovl_need_adjust_d_ino() and ovl_cache_update() use the d_parent of the listed directory and hold only the lock of that directory. When a lookup finds the directory under another parent after a change to a layer, d_splice_alias() moves it without that lock and drops its reference on the old parent. With a delay in ovl_iterate_real(), getdents64 on an overlay directory raced a rename in the lower layer and a lookup that moved its dentry, and after an rmdir of the old parent KASAN reported a use-after-free in security_inode_getattr(). Fix this by using dget_parent() in the three functions. [amir: fix comments in ovl_need_adjust_d_ino()] | ||||
| CVE-2026-99424 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: set OVL_WHITEOUTS before publishing the upper dir Listing a directory while it is copied up causes a use-after-free of the readdir cache. A merge directory must never be iterated as a real upper directory: that mode frees the cache in OVL_I(inode)->cache without looking at its refcount, while files opened in merged mode still use it. ovl_copy_up_workdir() publishes the upper dentry before it sets OVL_WHITEOUTS, and ovl_dir_open() samples both without a lock, so an open between the two stores finds the upper directory and takes it for a real one. With a delay between the two stores, an unprivileged process that listed a directory during its copy-up saw only "." and "..", and its next getdents freed the readdir cache of another descriptor. Fix this by setting OVL_WHITEOUTS before ovl_inode_update(), so that ovl_dir_reset() agrees with ovl_dir_open(), and by testing OVL_TYPE_MERGE() of the path type in ovl_dir_open(), so that an open that observes the upper dentry never iterates a merge dir as a real dir, regardless of the order in which it observes the flag. [amir: test OVL_TYPE_MERGE() instead of smp_rmb() in ovl_dir_open()] | ||||
| CVE-2026-99423 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: take a snapshot of the name for copy up The copy up of a directory reads a freed dentry name when a lookup moves the directory at the same time. A pointer to the name of a dentry is only valid while something stops a move of the dentry. ovl_do_copy_up() keeps a plain copy of c->dentry->d_name in c->destname, and ovl_copy_up_start() only keeps ovl_rename() away. When a lookup finds the same directory under another name after a change to the lower layer, d_splice_alias() moves the dentry and frees its external name. With a delay in ovl_do_copy_up(), a chmod of a lower-only directory with a 60 byte name raced with a rename of that directory in the lower layer and a stat of the new name, and KASAN reported a use-after-free in lookup_noperm_common(). Fix this by using take_dentry_name_snapshot() for c->destname. | ||||
| CVE-2026-99422 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: use the pinned upper dir in ovl_fix_origin() Renames made directly on the upper filesystem during a lookup crash the kernel. A dentry that is passed to vfs_setxattr() must be pinned. ovl_fix_origin() passes upper->d_parent to ovl_set_impure() without a reference, and the lookup holds no lock of the upper directory. A rename on the upper filesystem changes d_parent, and only the child pins the new parent, so a second rename and an rmdir free it. With delays in ovl_fix_origin() and ovl_set_impure(), renaming the upper directory twice and removing the intermediate parent during the lookup of a merge directory without an origin xattr gave a KASAN use-after-free in vfs_setxattr(). Fix this by passing the upper dentry that the overlay parent holds. [amir: add helper ovl_set_impure_dir()] | ||||
| CVE-2026-99421 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: always encode the origin fh when index is enabled On an overlay with index=on,nfs_export=on, copy up of a directory crashes the kernel once an LSM has started to deny CAP_DAC_READ_SEARCH to the mounter, the task that mounted the overlay. The mount and the LSM policy change require root. After that, any user who can write to a directory that exists only in a lower layer triggers the oops by doing so. Before a file or directory that exists only in a lower layer is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. On copy up, ovl_get_origin_fh() encodes the file handle of the lower inode, called the origin. It returns NULL if ovl_can_decode_fh() says that the lower filesystem cannot decode handles. Whether the callers can handle NULL depends on the index option: - Without an index, NULL is fine: the callers store an empty origin xattr. - With index enabled, overlayfs keeps entries for copied up inodes in an internal index directory. The name of an index entry is derived from the handle, so ovl_get_origin_fh() must return a handle or an error. The mount only enables the index if ovl_can_decode_fh() succeeds for all layers, but the result can change later. The function checks the export operations of the filesystem and capable(CAP_DAC_READ_SEARCH). Copy up runs with the mounter's credentials, and an LSM can start to deny the capability to those credentials after the mount. ovl_get_origin_fh() then returns NULL with index enabled. This goes wrong in two callers: - With nfs_export=on, copy up of a directory creates an index entry for the directory. ovl_create_index() passes the NULL handle to ovl_get_index_name_fh(), which dereferences it. - If the result changes while mount(2) is still running, ovl_get_indexdir() passes a NULL from ovl_get_origin_fh() to ovl_verify_set_fh() in the same way. Before the commit in the Fixes tag, these two callers encoded the handle themselves, without consulting ovl_can_decode_fh(). Reproduced with a BPF LSM program that started to deny the capability after the mount. An unprivileged touch in a directory that had not been copied up yet oopsed in ovl_get_index_name_fh(). With this patch the touch succeeds and the directory gets its index entry. Fix this by calling ovl_can_decode_fh() in ovl_get_origin_fh() only when index is disabled. | ||||
| CVE-2026-99420 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: check that the parents of volatile/dirty are dirs An unprivileged user crashes the kernel by mounting overlayfs with the volatile option. A dentry that serves as the parent of a lookup must be a directory. ovl_create_volatile_dirty() walks work/incompat/volatile/dirty by name, and ovl_lookup_or_create() returns an existing entry whatever its type. A file or a symlink that another task creates during the mount becomes the parent of the next lookup, which calls a NULL ->lookup. An unprivileged user mounted overlayfs with "volatile" in a user namespace while a second process created a symlink named work/incompat, and the mount task oopsed on a NULL ->lookup call. Fix this by returning -ENOTDIR from ovl_lookup_or_create() when the caller asked for a directory and the existing entry is a non-dir. | ||||
| CVE-2026-99419 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up a dentry that was removed A change to a removed file through an open descriptor replaces whatever has its old name in the upper layer. Copy up must only create a name in the upper directory, never replace one. After an unlink, an rmdir or a rename over a lower dentry, a dentry that an open file keeps alive still has its old parent and name, but in the upper directory that name is now a whiteout or a new object. ovl_copy_up_workdir() renames the copy over it, which brings back the removed object and destroys whatever took its name. An unprivileged user opened a lower FIFO and unlinked it, root created a file at that name, and fchmod on the old descriptor replaced the file of root with the FIFO. Fix this by looking up the target name of the rename in ovl_copy_up_workdir() with LOOKUP_EXCL, so that copy up fails with -EEXIST if the name is taken, as copy up with O_TMPFILE already does when it links the copy to the name. [amir: use LOOKUP_EXCL instead of relying on d_unhashed()] | ||||
| CVE-2026-99418 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: do not copy up an xattr value that was never read Copy-up stores uninitialized kernel memory in an xattr of the upper file, where the user can read it. ovl_copy_xattr() may only pass bytes to ovl_do_setxattr() that ovl_do_getxattr() has read. When the read fails with -ERANGE the function asks for the size again, and if the new size fits the buffer it stores the buffer although nothing was read into it. The buffer comes from kvmalloc(), or it still holds the value of the previous xattr. A FUSE lower layer that answers every sized GETXATTR with -ERANGE made copy-up store 4096 bytes that the server never sent, with a kernel pointer in them, as an xattr of the upper file. Fix this by failing the copy-up with -EIO when the size that follows -ERANGE fits the buffer. | ||||
| CVE-2026-99417 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix a torn path in ovl_get_redirect() A hard link of a metacopy file that races with a rename of an ancestor stores a redirect to the wrong lower file. Each component of an absolute redirect must be the name that a dentry has in the parent that the walk continues with. ovl_get_redirect() copies the name under d_lock and calls dget_parent() after the unlock, and the callers for a hard link hold no lock that stops a rename across directories. A rename between the two steps combines the old name with the new parent. With delays in ovl_get_redirect(), an unprivileged user hard-linked a metacopy file while renaming its ancestor to another directory, the stored redirect named another lower path, and after a remount the file showed the data of a root-only file. Fix this by taking the parent first and checking it again under d_lock. | ||||
| CVE-2026-99416 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: read the nlink xattr of every indexed non-dir With nfs_export=on, data written through a file handle to a lower file, i.e. a file that exists only in a lower layer of the overlay, can be lost on the next mount. A lookup of the file by name then returns -EIO. Also, a file with one name reports st_nlink 2 once it has been copied to the upper layer. After such a file is removed, its file handle can still open it until the next mount. Before a lower file is changed for the first time, overlayfs copies it to the writable upper layer. This is called copy up. The index directory is $workdir/index, where $workdir is the directory given by the workdir= option. Each entry is named after the file handle of a lower inode, so that overlayfs can get from the handle to the copied up inode. With nfs_export=on, copy up indexes every non-directory: it copies the file to an entry in the index directory and then hard links that entry into the upper directory. The index entry is an extra link to the upper inode, so overlayfs stores the link count that users should see in the overlay.nlink xattr. A file can also be opened by handle, either by an NFS client or by a process with CAP_DAC_READ_SEARCH calling open_by_handle_at(). If the file is not in the dcache, its overlay dentry is disconnected, i.e. it has no parent yet. Copy up then creates the index entry but no hard link in the upper directory. The index entry has i_nlink 1 and holds the only copy of the data written to the file. ovl_get_nlink() reads the stored count. Its caller passes a default, which the function returns if there is no stored count. If the lower inode has i_nlink 1, the function returns the default without reading the xattr. That was correct as long as only lower files with multiple links were indexed. On the next mount, ovl_verify_index() looks for orphans, i.e. index entries of files whose last name was removed. For an index entry with i_nlink 1, it passes a default of 0 to ovl_get_nlink() and treats a result of 0 as an orphan. Here the lower inode also has i_nlink 1, so the result is the default. ovl_indexdir_cleanup() then replaces the entry with a whiteout, which in the index marks a file as deleted. The written data is lost. A lookup by name then returns -EIO, because a whiteout as the index entry of a lower file that still exists is a bad index. ovl_get_inode() gets the wrong count the same way. Its default is the i_nlink of the upper inode, which includes the index entry, so a copied up file with one name reports st_nlink 2. When that name is removed, the count drops to 1 rather than 0. ovl_nlink_end() replaces the index entry with a whiteout only at a count of 0, so the entry stays, and the handle of the removed file still opens it. Reproduced by writing through open_by_handle_at() to an uncached lower file with one link. After a remount the data was lost, and the name returned EIO. Fix this by adding an argument to ovl_get_nlink() that says whether the caller found an index entry, and by skipping the xattr only if the caller found none. Known gaps: - An index entry that a kernel without this patch left behind for a removed file now stays, and the handle of that file keeps working. The entry has i_nlink 1 and a stored count of 1, just like the entry of a file that was only written by handle. Without this patch, the next mount treated it as an orphan. | ||||
| CVE-2026-99415 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: set the revalidate flags after d_instantiate() stat() of a file on an overlayfs mount triggers a kernel warning and fails with ECHILD if another task is creating that file at the same time. This happens on an overlay with a FUSE upper layer, which is the layer where overlayfs creates new files. Write access to a directory on such an overlay is all a user needs to run the two tasks. The revalidate flags are DCACHE_OP_REVALIDATE and DCACHE_OP_WEAK_REVALIDATE. They tell path walk to call ->d_revalidate() or ->d_weak_revalidate() on a dentry, so that the filesystem can check that the cached dentry is still valid. An overlay dentry only has one of these flags if a dentry in one of its layers has it. FUSE dentries have the first one. When a flag is set on an overlay dentry, path walk calls ovl_dentry_revalidate_common(). That function only expects a dentry without an inode in RCU walk, while the dentry is being destroyed. For such a dentry outside of RCU walk, it hits a WARN_ON() and returns -ECHILD. So a negative overlay dentry must never have the flags set. ovl_instantiate() breaks this rule. When a task creates a file, the overlay dentry for the new name is hashed but still negative. ovl_instantiate() then works in this order: - It copies the flags from the new upper dentry to the overlay dentry. - It calls ovl_get_inode(), which can sleep in a getxattr request to the FUSE server. - Only then does it call d_instantiate(). A second task that looks up the name between the first step and the last finds a negative dentry with the flags set and revalidates it. Reproduced with a FUSE server that delays its getxattr reply: stat() of a name that was being created hit the WARN_ON() and failed with ECHILD. Fix this by setting the flags after d_instantiate(). | ||||
| CVE-2026-99414 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovl: skip copy up of empty security.capability ovl_copy_xattr() gives up if it can't read an attribute that listxattr() has named. An empty security.capability, which anybody has been able to store on any file for a long time, is such a case: it is listed, and getxattr() has nothing to return for it. A file in a lower layer that carries one can't be copied up: it can't be written to, renamed or have its mode changed. There is nothing to copy if there are no data. Go on with the next one. [amir: treat -EINVAL as no capability too, and do the same in ovl_copy_up_meta_inode_data()] | ||||
| CVE-2026-99413 | 1 Linux | 1 Linux Kernel | 2026-11-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained. | ||||