Export limit exceeded: 26192 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (26192 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99317 1 Linux 2 Linux, Linux Kernel 2026-11-19 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: hwdep: Serialize DSP load requests The check of the loaded DSP indices and the call of the driver's dsp_load callback in snd_hwdep_dsp_load() are not serialized. A hwdep file descriptor can be shared among threads, or inherited across fork, so two SNDRV_HWDEP_IOCTL_DSP_LOAD requests for the same index can both observe the index as unloaded and enter the driver's callback concurrently, even though the device itself is opened exclusively. This breaks the assumption behind hw->dsp_loaded that a firmware index is loaded only once. For example, snd-usb-usx2y hits WARN_ON(usx2y->as04.buffer) in usx2y_async_seq04_init() and may allocate the US-428 sequence URBs twice. Serialize the check, the callback invocation and the bookkeeping with a per-hwdep mutex, so that the second request returns -EBUSY.
CVE-2026-99319 1 Linux 2 Linux, Linux Kernel 2026-11-19 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Refuse a retried DSP load after a failure snd_usx2y_hwdep_dsp_load() sets up the asynchronous sequence URBs and the interrupt URB when the FPGA firmware image with index 1 is loaded, and then creates the ALSA devices. If usx2y_in04_init() or usx2y_create_alsa_devices() fails, the URBs that were already set up are left in place. The core keeps the index unloaded when the callback fails, so user space may issue the same request again. The second attempt then enters usx2y_async_seq04_init() or usx2y_in04_init() with the URBs still allocated and trips WARN_ON(usx2y->as04.buffer) or WARN_ON(usx2y->in04_urb). The URBs cannot be released at this point: the card may already have registered PCM devices that user space can still open, and the disconnect handler accesses the URBs without holding the DSP lock. Mark the chip as hung instead, so that a retried request is refused with -ENODEV and the assertions keep their meaning. The URBs are released by snd_usx2y_card_private_free() when the card is freed. A failing usx2y_async_seq04_init() still releases its own URBs, so that path remains retryable.
CVE-2026-99312 1 Linux 2 Linux, Linux Kernel 2026-11-19 5.6 Medium
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Unconditionally reset MMU context when emulating INIT Force an MMU reset when emulating an INIT even if paging was already disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU context. Alternatively, the reset could be scoped strictly to paging being enabled or L2 being active, but SMM is also encoded in the page role. Even though it _should_ be impossible for the vCPU to be INIT'd while SMM is active, there's zero value in not handling SMM. At that point, the only scenario where KVM _doesn't_ need to reset the MMU context is on an INIT with the vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those modes is somewhat common, it's far from a hot path and re-initializing the MMU is not expensive, especially when the role isn't changing (KVM elides most of the re-configuration in that case). Note, like the Fixes commit, this bug only affects nested SVM as INIT is an unconditional intercept on VMX, i.e. it's impossible to emulate INIT while L2 is active. Temporarily keep the guest TLB flush when CR0.PG is being cleared even though it is fully redundant with the flush that is emitted on all INIT events (KVM itself only does RESET when a vCPU is being created, i.e. when CR0.PG must be '0').
CVE-2026-99313 1 Linux 2 Linux, Linux Kernel 2026-11-19 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: fix race condition when accessing stale stack pointer The driver uses hidpp->send_receive_buf to point to a stack-allocated buffer in the synchronous command path (__do_hidpp_send_message_sync). However, this pointer is not cleared when the function returns. If an event is processed (e.g. by a different thread) while the send_mutex is held by a new command, but before that command has updated send_receive_buf, the handler (hidpp_raw_hidpp_event) will observe that the mutex is locked and dereference the stale pointer. This results in an out-of-bounds access on a different thread's kernel stack (or a NULL pointer dereference on the very first command). Fix this by: 1. Clearing hidpp->send_receive_buf to NULL before releasing the mutex in the synchronous command path. 2. Moving the assignment of the local 'question' and 'answer' pointers inside the mutex_is_locked() block in the handler, and adding a NULL check before dereferencing.
CVE-2026-99318 1 Linux 2 Linux, Linux Kernel 2026-11-19 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix use-after-free of MIDI URBs on file close bcd2000_disconnect() calls snd_card_disconnect(), which only prevents new opens, and then frees the MIDI URBs. A rawmidi file that was already open can still be closed afterwards, and its close callback, bcd2000_midi_output_close(), calls usb_kill_urb() on midi_out_urb. The URB pointers are cleared on disconnect and their accesses are serialized with midi_lock, but bcd2000_midi_output_close() reads midi_out_urb without that lock. The check can therefore pass just before the pointer is cleared, and usb_kill_urb() then runs on the URB that has already been freed: BUG: KASAN: slab-use-after-free in usb_kill_urb+0x74/0x80 Read of size 8 at addr ffff8880078e7d40 usb_kill_urb bcd2000_midi_output_close close_substream rawmidi_release_priv snd_rawmidi_release Allocated by: usb_alloc_urb <- bcd2000_init_midi <- bcd2000_probe Freed by: usb_free_urb <- bcd2000_midi_free <- bcd2000_disconnect Take the lock in bcd2000_midi_output_close() and reference the URB with usb_get_urb() before releasing it. The URB then stays valid until usb_put_urb() after usb_kill_urb() has returned, even if a disconnect frees it in the meantime. usb_kill_urb() itself cannot run under midi_lock, as the completion handler takes the same lock.
CVE-2026-99320 1 Linux 1 Linux Kernel 2026-11-19 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ipv6: raw: fix use-after-free in rawv6_send_hdrinc() rawv6_send_hdrinc() caches the route before handing the skb to l3mdev_ip6_out(). The VRF output path may replace skb->dst and release the original route, leaving the cached pointer stale. The function later dereferences that pointer for statistics accounting and as the output device passed to NF_HOOK(). Its RCU read-side critical section starts after l3mdev_ip6_out(), so it cannot prevent the old route from being reclaimed in between. Reload the route from the current skb destination after l3mdev_ip6_out() returns. KASAN reports a slab-use-after-free in rawv6_sendmsg(), with the route allocated by ip6_dst_alloc(), freed by dst_destroy() from rcu_core(), and the related RCU callback queued from vrf_l3_out().
CVE-2026-99314 1 Linux 2 Linux, Linux Kernel 2026-11-19 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Add missing NULL check in usb_stream_hwdep_mmap() usb_stream_hwdep_mmap() reads us122l->sk.s and dereferences it without checking for NULL. The stream object is released by usb_stream_free(), which is reached through us122l_stop() both when the device is disconnected and when us122l_start() fails, and it leaves us122l->sk.s set to NULL. The hwdep file stays usable after that, so a later mmap() KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:usb_stream_hwdep_mmap+0x107/0x890 sound/usb/usx2y/us122l.c:182 crashes while reading s->read_size, which sits at offset 0x10. That NULL is an expected state for this field: usb_stream_hwdep_vm_fault(), usb_stream_hwdep_poll(), usb_stream_hwdep_ioctl(), usb_stream_stop() and usb_stream_free() all test it before use. Only the mmap callback misses the check, so let it return -ENODEV, matching what the other hwdep mapping in usx2yhwdeppcm.c does when its shared buffer has not been allocated.
CVE-2026-99315 1 Linux 2 Linux, Linux Kernel 2026-11-18 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Fix NULL dereference at hwdep open and release usb_stream_hwdep_open() and usb_stream_hwdep_release() pass the result of usb_ifnum_to_if() straight to usb_autopm_get_interface() and usb_autopm_put_interface(), without checking it for NULL. usb_ifnum_to_if() returns NULL once the device is gone, since usb_disable_device() clears udev->actconfig on disconnect. The hwdep file can outlive the disconnect: the card is released with snd_card_free_when_closed(), so a process that keeps the character device open reaches the driver's release callback after the USB configuration has been dropped, and interface_to_usbdev() then dereferences the NULL interface at offsetof(struct device, parent). The open callback has the same problem when it races with the disconnect. Check both lookups and fail the open with -ENODEV; in release, skip the runtime PM put when the interface is already gone and still run the rest of the per-file cleanup. Move the us122l->first bookkeeping after the checks so that a failed open no longer leaves a stale file pointer behind.
CVE-2026-99316 1 Linux 2 Linux, Linux Kernel 2026-11-18 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Initialize idle URBs before submitting streams usb_stream_start() submits the first two capture and playback URBs and only afterwards assigns sk->idle_inurb, sk->idle_outurb, sk->completed_inurb and sk->completed_outurb to the remaining two URBs of each direction. A transfer can complete as soon as usb_submit_urb() has been called, so the completion handler i_capture_start() or i_playback_start() may run before those pointers are set. While the stream is still being synchronized (state below usb_stream_sync1), stream_start() then calls playback_prep_freqn(sk, sk->idle_outurb) with sk->idle_outurb still NULL, and the packet descriptors are written through that NULL pointer: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:playback_prep_freqn+0x11c/0x4a0 sound/usb/usx2y/usb_stream.c:33 Call Trace: <IRQ> stream_start+0x5dc/0x8d0 sound/usb/usx2y/usb_stream.c:596 i_capture_start+0x3da/0x710 sound/usb/usx2y/usb_stream.c:654 __usb_hcd_giveback_urb+0x238/0x550 drivers/usb/core/hcd.c:1657 usb_giveback_urb_bh+0x20b/0x530 drivers/usb/core/hcd.c:1691 tasklet_hi_action+0xa/0x20 kernel/softirq.c:994 handle_softirqs+0x16f/0x440 kernel/softirq.c:645 </IRQ> The four URBs referenced by these pointers are allocated long before and do not depend on any transfer state, so assign them before the submit loop. Keeping the assignment inside the retry path also restores a well-defined URB rotation when the start frame mismatch handling kills and resubmits the streams.
CVE-2026-63819 1 Linux 1 Linux Kernel 2026-11-18 7.8 High
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on f2fs_get_node_folio_ra() kernel BUG at fs/f2fs/file.c:845! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845 Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90 RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283 RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000 RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504 RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002 R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0 Call Trace: <TASK> f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0); The fuzz test will trigger above bug_on in f2fs. The root cause should be: in the corrupted inode, there is a direct node which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(), after f2fs_get_dnode_of_data() finds such dnode: 1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923 2) once dn.ofs_in_node points to addr[923, 1017] Then it will trigger the system panic. Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should not be an inode or xattr node, and then use it in below path to detect inconsistent node chain in inode mapping table: - f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode
CVE-2026-64459 1 Linux 1 Linux Kernel 2026-11-18 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: tcp: restore RCU grace period in tcp_ao_destroy_sock Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU") removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that "the destruction of info/keys is delayed until the socket destructor" and therefore "no one can discover it anymore". That argument does not hold for the call site in tcp_connect() (net/ipv4/tcp_output.c:4327-4332). At that point the socket is in TCP_SYN_SENT, has already been inserted into the inet ehash by inet_hash_connect() in tcp_v4_connect(), and is therefore very much discoverable: any softirq running tcp_v4_rcv() on another CPU can take the socket out of the ehash, walk into tcp_inbound_hash(), and load tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on the destroying CPU. The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208) which re-loads tp->ao_info via rcu_dereference_check(); the re-load can still observe the (about-to-be-freed) pointer because there is no synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is then walked at line 223: hlist_for_each_entry_rcu(key, &ao->head, node, ...) The writer's synchronous kfree() is free to complete between the line 218 re-fetch and the line 223 hlist iteration. The slab is reused (or simply LIST_POISON1-stamped if not yet reused) and the iteration walks attacker-controlled or poison memory in softirq context. Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM): an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged TCP-AO segments toward its eventual 4-tuple via raw sockets, then calls connect(). The md5-wins reconciliation in tcp_connect() fires tcp_ao_destroy_sock(); the softirq backlog reader on the loopback NAPI path crashes on the freed ao->head.first walk: Oops: general protection fault, probably for non-canonical address 0xfbd59c000000002f KASAN: maybe wild-memory-access in range [0xdead000000000178-0xdead00000000017f] CPU: 0 UID: 1000 PID: 100 Comm: repro_userns RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0 Call Trace: <IRQ> __tcp_ao_do_lookup+0x107/0x1c0 tcp_ao_inbound_lookup.constprop.0+0x12a/0x200 tcp_inbound_ao_hash+0x5ea/0x1520 tcp_inbound_hash+0x7ce/0x1240 tcp_v4_rcv+0x1e7a/0x3e10 ... Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info and replace the synchronous tcp_ao_info_free() with a call_rcu() callback. Readers that captured tp->ao_info before rcu_assign_pointer NULLed it now see the object remain valid until rcu_read_unlock(). With the patch applied the reproducer runs cleanly for 2000 iterations on the same kernel build.
CVE-2026-64462 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: PCI: altera: Fix resource leaks on probe failure The chained IRQ handler is set during probe, but is only removed during the driver remove(). If pci_host_probe() fails, the handler and INTx IRQ domain remain set even though the devm-managed host bridge storage containing struct altera_pcie will be released, leaving the handler with a stale data pointer. Interrupts are also enabled before pci_host_probe() is called. If probe fails after that point, the controller interrupt source should be disabled before the chained handler and INTx domain are removed. So set the chained handler only after the INTx domain has been created. Disable controller interrupts during IRQ teardown, and tear the IRQ setup down if pci_host_probe() fails. [mani: commit log]
CVE-2026-64482 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: gus: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_gf1_pcm_volume_control() does not check the return value before dereferencing kctl->id.index, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails.
CVE-2026-64483 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the sample count to the packet payload isight_packet() takes the frame count from the device iso packet and checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples() then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area. The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate.
CVE-2026-64484 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: es1938: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_es1938_mixer() does not check the return value before dereferencing the pointer, which can lead to a NULL pointer dereference. Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails.
CVE-2026-64486 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: cmipci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_cmipci_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails.
CVE-2026-64489 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: check snd_ctl_new1() return value snd_ctl_new1() can return NULL when memory allocation fails. snd_ymfpci_create_spdif_controls() does not check the return value before dereferencing kctl->id.device, which can lead to a NULL pointer dereference. Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any fails.
CVE-2026-64491 1 Linux 1 Linux Kernel 2026-11-18 7.8 High
In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: us144mkii: fix work UAF on disconnect tascam_disconnect() cancels capture_work and midi_in_work before usb_kill_anchored_urbs() kills the capture/MIDI-in URBs. Those URBs self-resubmit, and their completion handlers reschedule the work. A URB that completes in the small window between cancel_work_sync() and usb_kill_anchored_urbs() therefore re-arms the work after its only cancel. Nothing cancels it again before snd_card_free() frees the card-private tascam structure, so the work handler then runs on freed memory. Kill the anchored URBs before cancelling the work; once the work is cancelled no remaining URB can complete to re-arm it.
CVE-2026-64492 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: iio: temperature: tmp006: use devm_iio_trigger_register tmp006_probe() allocates the DRDY trigger with devm_iio_trigger_alloc() but registers it with plain iio_trigger_register(). The driver has no .remove() callback, so on module unload the trigger stays in the global trigger list while its memory is freed by devm, leaving a dangling entry. Switch to devm_iio_trigger_register() so the registration is undone in the same devm scope as the allocation.
CVE-2026-98067 1 Linux 1 Linux Kernel 2026-11-18 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: erofs: disable LZ4 rolling decompression for now LZ4 rolling decompression [1] was introduced to reduce the memory footprint of temporary pages: For many cases, it is needed for users to read small data within a compressed extent (pcluster), either due to random small read, or since uptodate folios (typically order-0) cannot be reused for decompression again since decompression algorithm refills already-uptodate folios. Rolling decompression works because LZ4 is LZ77-based and only refers to the most recent 64 KiB of decompressed data, so in theory only a bounded rolling window of temporary pages is needed when decompressing. It can save a lot of temporary memory, e.g. 601,960-byte data can be compressed into a 256k LZ4 compressed extent, which means it needs 146 extra pages per request in the worst case if rolling decompression is disabled. However, the upstream LZ4 implementation is not under EROFS' control: For example, the literal copy memmove() may still **copy long literals backward** on x86 based on the address comparison even when the source and destination ranges do not overlap (IOWs, inline decompression doesn't need to be considered here). That breaks the rolling assumption and makes the optimization broken. Disable it for now to make sure the data correctness first since EROFS is used everywhere now: The rolling window approach can be revived once we either ensure that the official LZ4 code always copies forward for non-overlapping ranges or maintain our own LZ4 implementation in EROFS. The main impact is a higher runtime memory footprint; However, recent commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4 decompression") helps mitigate this when enabled but it's still not perfect. [1] https://www.usenix.org/conference/atc19/presentation/gao § 3.3 Decompression