Export limit exceeded: 16596 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16596 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-76840 | 1 Rustdesk | 1 Rustdesk | 2026-11-20 | 9.6 Critical |
| RustDesk's Windows clipboard redirection copies a peer-supplied length into a fixed-size caller buffer without an upper bound check. When an OLE paste consumer such as explorer.exe calls IStream::Read with a buffer of cb bytes, CliprdrStream_Read in libs/clipboard/src/windows/wf_cliprdr.c requests that many bytes of a remote file through cliprdr_send_request_filecontents and then executes CopyMemory(pv, clipboard->req_fdata, clipboard->req_fsize), where req_fsize is taken verbatim from the peer's CLIPRDR FileContentsResponse by wf_cliprdr_server_file_contents_response (req_fsize = fileContentsResponse->cbRequested) and is never clamped to cb anywhere in the chain. The function's only length comparison, req_fsize < cb, handles the short-read case and is evaluated after the copy has already occurred. A malicious or compromised peer that answers a small file-contents read with an oversized response therefore writes attacker-chosen data past the end of the paste consumer's heap buffer when the local user pastes clipboard file contents offered by the remote side. The file is a fork of FreeRDP's client/Windows/wf_cliprdr.c, where the same defect is CVE-2026-68579, fixed in FreeRDP 3.30.0. | ||||
| CVE-2026-121958 | 1 Freerdp | 1 Freerdp | 2026-11-20 | 8.8 High |
| FreeRDP before 3.32.2 has a heap out-of-bounds write in the RDPGFX client because the delete_surface callback truncates surface hash keys to 16 bits, leaving the surface table inconsistent so HashTable_GetKeys writes past its allocated key array. A malicious or man-in-the-middle RDP server can exploit this by creating surfaceId 0xFFFF, closing the RDPGFX channel, sending repeated DELETESURFACE PDUs, and then sending ENDFRAME or RESETGRAPHICS. | ||||
| CVE-2026-109256 | 1 Freerdp | 1 Freerdp | 2026-11-20 | 5.3 Medium |
| FreeRDP 3.10.0 before 3.33.0 contains a heap buffer overflow in the WinPR png_write_data callback that writes past the buffer after a realloc failure. A malicious RDP clipboard peer can supply a large CF_DIB image that triggers out-of-bounds memcpy during PNG conversion, causing a client crash. | ||||
| CVE-2026-122042 | 1 Enterprisedb | 1 Warehousepg | 2026-11-20 | N/A |
| WarehousePG (WHPG) 6.27.1 through 6.27.7 and 7.2.1 through 7.6.1 are affected by an out-of-bounds write vulnerability (CWE-787) in gpfdist, the file server used to load and unload external tables. When gpfdist attaches a request to a session, it sizes two internal arrays from the client-supplied X-GP-SEGMENT-COUNT header and writes to them at the index given by the X-GP-SEGMENT-ID header, without checking that the index is non-negative and smaller than the count (CWE-129). gpfdist does not authenticate callers unless gpfdists is used with client certificate verification, so an attacker who can reach the gpfdist port can crash it with a single HTTP request, failing every external table load or unload that uses that gpfdist instance. gpfdist is normally reachable only from the cluster's internal network. | ||||
| CVE-2026-133612 | 1 Squeezeailab | 1 Squeezellm | 2026-11-20 | 5.5 Medium |
| A weakness has been identified in SqueezeAILab SqueezeLLM up to a5fd71f353bf569feb7b55737c1c1493e78e8f31. This vulnerability affects the function vecquant4matmul_spmv_hybrid_nuq_perchannel of the file quant_cuda_kernel.cu of the component CUDA Matvec Kernel. Executing a manipulation of the argument full_row_indices can lead to out-of-bounds write. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-116446 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-11-20 | 9.8 Critical |
| Dell PowerStore SDNAS contains an out-of-bounds memory vulnerability in the NAS NFS service that an unauthenticated remote attacker could exploit to cause a denial of service. | ||||
| CVE-2026-99662 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix out-of-bounds write for nr_pages == 0 in GUP-fast With nr_pages == 0, GUP-fast still enters its page table walk and can write past the caller's page array. The old end <= start check caught empty ranges, but was replaced with an overflow check. Users such as OrangeFS can pass a zero page count derived from a userspace-supplied length. So let's return zero for nr_pages == 0 before starting the walk, just like GUP-slow. Fix generated by an LLM and sent by Chris Mason in private. [ david: simplify description ] | ||||
| CVE-2026-99355 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix oversized GSS proxy token copy gss_read_proxy_verf() allocates one page per token chunk, but it copies the entire linear head of an RPC request into in_token->pages[0]. A UDP datagram can leave more than PAGE_SIZE bytes in the linear head, so a large RPCSEC_GSS INIT token overwrites following pages. Copy the linear head in page-sized chunks before switching to the request page array. The linear head itself can span multiple pages. | ||||
| CVE-2026-99362 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: preflight SEQUENCE replies before accepting a slot nfsd4_sequence() narrows the reply buffer to the session's cached reply limit before it accepts the slot seqid. A client may negotiate ca_maxresponsesize_cached down to NFSD_MIN_HDR_SEQ_SZ, and nfsd4_alloc_slot() then gives every slot a zero-length sl_data[]. A COMPOUND tag can fill that narrowed buffer until it holds the SEQUENCE opcode but not the status word that follows. nfsd4_encode_operation() returns without running nfsd4_encode_sequence(), so cstate.data_offset stays zero. It leaves op->status at nfs_ok as well, so the COMPOUND is treated as having succeeded. nfsd4_store_cache_entry() declines to cache a lone SEQUENCE that returned an error. That test reads the status the operation reported, so it passes here. The copy starts at offset zero and takes the whole reply, RPC and COMPOUND headers included, into the zero-length sl_data[]. The COMPOUND tag is copied along with it, so the client picks most of the bytes written past the end of the slot: BUG: KASAN: slab-out-of-bounds in read_bytes_from_xdr_buf+0x1bc/0x390 Write of size 80 at addr ffff888003a549cd by task kunit_try_catch/24 __asan_memcpy+0x38/0x60 read_bytes_from_xdr_buf+0x1bc/0x390 nfsd4_sequence_done+0x5b0/0x810 nfs4svc_encode_compoundres+0x1bf/0x240 Check that the fixed-size SEQUENCE result, plus room for a following operation's error status, fits the negotiated limit before narrowing the buffer and consuming the slot seqid. The slot and its reply cache are left unchanged, as RFC 8881 Section 2.10.6.1.2 requires of an error returned from SEQUENCE. | ||||
| CVE-2026-99385 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix buffer overflow in SMB2_tcon() In SMB2_tcon(), unc_path is allocated with a fixed buffer size of MAX_SHARENAME_LENGTH * 2 bytes (672 bytes). However, the user-controlled UNC path (tree) length is passed to cifs_strtoUTF16(), which assumes the destination buffer is large enough and writes strlen(tree) + 1 UTF-16 code units. Commit 62a1a439e0fd ("cifs: clean up handling of unc= option") removed the length check on UNC mount options, allowing mount paths to exceed MAX_SHARENAME_LENGTH while retaining the fixed-size buffer allocation in SMB2_tcon(). Consequently, an oversized UNC string causes cifs_strtoUTF16() to write past the end of the heap object, resulting in a slab-out-of-bounds write. Furthermore, if a tree exceeds MAX_TREE_SIZE characters, strscpy() truncates it in cifs_tcon::tree_name, causing subsequent reconnects or failovers to fail. Fix this by first verifying that the length of tree does not exceed MAX_TREE_SIZE, returning -EINVAL if it does. Then, dynamically allocate unc_path based on the length of tree so that it safely accommodates all UTF-16 code units for paths within MAX_TREE_SIZE. [pc: remove unused MAX_SHARENAME_LENGTH] | ||||
| CVE-2026-99388 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: fix buffer length underflow in RDMA transfers When a remote buffer descriptor is larger than the remaining local buffer, smbdirect_connection_rdma_xmit() clamps its length and sets buf_len to zero. The common accounting code then subtracts the clamped length from buf_len, causing it to underflow. If another descriptor follows, the loop processes it with a wrapped remaining length and includes memory beyond the local buffer in the RDMA transfer. A client can trigger an out-of-bounds kernel write with an SMB WRITE request, or an out-of-bounds kernel read with an SMB READ request, by supplying multiple RDMA buffer descriptors with an oversized descriptor before the last one. Remove the premature assignment to buf_len. Subtracting the clamped length already consumes the remaining buffer, so the next iteration stops and only descriptors within the local buffer are used to build work requests. | ||||
| CVE-2026-99389 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: size directory name conversion buffer correctly A 2048-byte ASCII directory name needs 4098 bytes when converted to UTF-16, including the terminator. ksmbd_convert_dir_info_name() caps its allocation at PATH_MAX and writes past the end of that buffer. Allocate space for one UTF-16 code unit per input byte plus the terminator. Use kmalloc_array() to check the size calculation. | ||||
| CVE-2026-99395 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: bound inode fork length against the fork size during log recovery xlog_recover_inode_commit_pass2() copies an inode log item's data/attr fork region into the inode buffer using the on-log region length without bounding it against the fork capacity, e.g.: len = item->ri_buf[2].iov_len; memcpy(XFS_DFORK_DPTR(dip), src, len); The only guard is an ASSERT, which is a no-op on production kernels (CONFIG_XFS_DEBUG off), and xfs_dinode_verify() runs only after the copy. A crafted image with a dirty log can therefore drive a heap out-of-bounds write at mount time. The XFS_ILOG_DBROOT sibling already passes XFS_DFORK_DSIZE as a bound; the DDATA/DEXT and ADATA/AEXT memcpy paths did not. Bound each logged fork region against the destination fork size before copying it, and reject the log item with -EFSCORRUPTED when it does not fit. Because the recovered inode is only verified after the fork data has been copied in, the checks are done up front, before any memcpy into the on-disk inode. | ||||
| CVE-2026-99399 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: reject remote xattr entries with an out-of-range value length xfs_attr3_leaf_verify_entry() validates a remote attribute entry's name but never bounds its on-disk value length (xfs_attr_leaf_name_remote. valuelen, a __be32). A crafted leaf with valuelen = 0x80000000 passes the verifier and the CRC. That length is later assigned into the signed int args->rmtvaluelen (xfs_attr3_leaf_getvalue), becoming negative, which slips past the signed -ERANGE check in xfs_attr_copy_value(); a getxattr() with a small buffer then memcpy()s a full remote block into the small kvalue buffer (xfs_attr_rmtval_copyout) -- a heap out-of-bounds write with attacker-controlled content, from an unprivileged getxattr(2) on a mounted crafted image. Reject remote entries whose value length exceeds XFS_XATTR_SIZE_MAX in the leaf verifier, so the malicious block is rejected at read time. | ||||
| CVE-2026-99400 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: reject out-of-range attribute value lengths in xfs_attr_copy_value xfs_attr_copy_value() takes the value length as a signed int and, for a remote xattr, is handed args->rmtvaluelen. That field is filled from the on-disk __be32 xfs_attr_leaf_name_remote.valuelen in xfs_attr3_leaf_getvalue(), so a crafted length such as 0x80000000 is stored into the signed rmtvaluelen as a negative number. The "buffer too small" guard in xfs_attr_copy_value() is a signed comparison: if (args->valuelen < valuelen) return -ERANGE; A negative valuelen therefore compares as smaller than the caller's buffer size, skips the -ERANGE path, and is then used as a copy length, leading to an out-of-bounds copy of a full remote block into a small getxattr(2) buffer on a mounted crafted image. Reject a value length that is negative or larger than the maximum xattr size before it is used, so a bogus on-disk length can no longer slip through the value copier. | ||||
| CVE-2026-99412 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: avoid cross-rtgroup reaping after a repair LOLLM notices that the extents stored in a xrtb_bitmap (aka xfs_rtblock bitmap) can span multiple rtgroups due to two circumstances. The first is that the size of an rtgroup is an exact power of two, which means that rtgroups are adjacent in the segmented xfs_rtblock_t address space. This is fairly common to reduce the amount of multiplication and division needed to handle space on the rt volume. The second is that (unlike in the original rtgroups design), rtgroups do not have fixed-location metadata like AGs do, which means that there's nothing to force a break between rtgroups. Therefore, we must loop through the rtgroups in xreap_rtmeta_extent to avoid running off the end of an rtgroup while reaping. | ||||
| CVE-2026-116441 | 1 Dell | 12 Powerstore 1000t, Powerstore 1200t, Powerstore 3000t and 9 more | 2026-11-20 | 9.6 Critical |
| Dell PowerStore SDNAS contains an out-of-bounds write vulnerability in the storage-processor interconnect driver that could allow a malicious peer to execute code with system privileges. | ||||
| CVE-2026-99413 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix buffer overruns in xfs_ioc_attr_list When we converted the al_offset array in struct xfs_attrlist into a VLA, the size of the object shrank by 4 bytes. Unfortunately, the buffer size validation in the attrlist ioctl wasn't updated to notice this, so the al_offset[0] assignment blindly writes off the end of the buffer. LOLLM noticed the omitted check and complained. | ||||
| CVE-2026-99430 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix chunk number of the first chunk in a local quota file Mounting a crafted OCFS2 image can corrupt kernel memory. When the local quota file header of such an image claims zero chunks, the first quota entry allocated during the mount gets a chunk number taken from a kernel pointer, and releasing that entry clears a bit far outside the chunk bitmap. The write will corrupt the data stored at that address, and the corruption may lead to a system crash or damage unrelated data. Mounting requires CAP_SYS_ADMIN, so it takes an untrusted image, such as removable media or a loop mount of a file from elsewhere. Since the chunk number comes from a kernel pointer, the address of the bit that gets cleared differs from boot to boot, and the issue has been reported under several titles: - BUG: unable to handle kernel paging request in ocfs2_local_release_dquot - KASAN: use-after-free Write in ocfs2_local_release_dquot - KASAN: slab-out-of-bounds Write in ocfs2_local_release_dquot - KASAN: slab-use-after-free Write in ocfs2_local_release_dquot - KFENCE: use-after-free write in ocfs2_local_release_dquot Note that none of these is a use-after-free in the quota code: the chunk and its buffer head are alive. The bit that gets cleared lies far outside the bitmap. KASAN and KFENCE name each report based on the object occupying that address, which explains why the same issue is reported under so many different titles. In the report I sent, the address fell in a free page, which KASAN labels use-after-free. There are known reproducers. Both a syzkaller and a C reproducer are available from the Google Drive link [1] in my report thread. The issue was found by our modified syzkaller, not a theoretical thing found by an LLM. I have not seen it outside fuzzing, so it is not affecting me in the real world. The local quota file in OCFS2 is divided into chunks, and each chunk begins with a header block holding a bitmap of the quota entries that chunk has handed out. Chunks are numbered from zero, and that number is used to convert the file offset of an entry back into a bit position in the bitmap. ocfs2_local_quota_add_chunk() appends a new chunk to the in-memory list and numbers it one past the chunk that was last: list_add_tail(&chunk->qc_chunk, &oinfo->dqi_chunk); chunk->qc_num = list_entry(chunk->qc_chunk.prev, struct ocfs2_quota_chunk, qc_chunk)->qc_num + 1; The predecessor is looked up after the new chunk is added to the list, so if the list was empty, the prev pointer is the list head itself. The head is the dqi_chunk member of struct ocfs2_mem_dqinfo and is not a chunk, so reading qc_num through it lands 16 bytes past the start of the head, on the dqi_gqinode pointer that follows it. The first chunk of the file is then numbered with the lower half of a kernel pointer instead of 0. The list is empty when the local quota file header claims the file has no chunks. ocfs2_local_read_info() takes dqi_chunks from that header without validating it, so an image with dqi_chunks == 0 takes this path when the first quota entry is allocated. ocfs2_create_local_dquot() turns the bad number into a file offset with ol_dqblk_off(), which shifts a 32-bit block number left by the block size bits, so the top bits of such a large block number are lost. ocfs2_local_release_dquot() turns the offset back into a bit index with ol_dqblk_chunk_off(), using the full chunk number, so the lost bits push that index far outside the bitmap, and clearing it corrupts unrelated memory. Compute the chunk number before putting the chunk on the list, and use 0 when the list is empty. | ||||
| CVE-2026-99674 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-20 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: dev: can_dropped_invalid_skb: drop CAN XL frames on non-CAN XL devices Sending a PF_PACKET bypasses the CAN framework logic and can directly reach a CAN driver's xmit() function. The PF_PACKET framework only checks that skb->len does not exceed the net_device MTU. For a CAN device that is not CAN XL capable, anything above CANFD_MTU (72 bytes) is therefore dropped before it reaches the driver. However, CAN XL frames are variable length. can_is_canxl_skb() accepts lengths in the range CANXL_HDR_SIZE + CANXL_MIN_DLEN up to CANXL_MTU, i.e. 13 to 2060 bytes. As a result, an ETH_P_CANXL skb with a length between 13 and 72 bytes can pass both the MTU and the can_dropped_invalid_skb() checks. A driver that does not support CAN XL will interpret canxl_frame->flags as a length because of the overlap with can_frame->len. And because CANXL_XLF is set, the resulting length is between 128 and 255. For drivers that do not check can_frame->len before copying can_frame->data, as most drivers do, this results in a buffer overflow of up to 247 bytes. Drop ETH_P_CANXL skbs if the device does not have the CAN_CAP_XL capability. Keep can_is_canxl_skb() for the validation of CAN XL skbs. | ||||